CHACON EcoWatt 650 энергия эсептегичи колдонуучунун колдонмосу

Introduction

This manual provides comprehensive instructions for the safe and efficient use of your CHACON EcoWatt 650 Energy Meter. This device is designed to help you monitor and understand your electricity consumption, enabling better energy management and potential energy savings.

Коопсуздук маалыматы

• Түзмөктү иштетүүдөн мурун бардык көрсөтмөлөрдү кылдат окуп чыгыңыз.
• Do not disassemble, modify, or attempt to repair the device. Refer servicing to qualified personnel.
• Ensure the device is connected to a properly grounded electrical outlet.
• Аппаратты сууга, нымдуулукка же экстремалдык температурага тийгизбеңиз.
• Аппаратты балдар жетпеген жерде сактаңыз.
• The maximum load for this device is 3.5 kW (3500 Watts) and 6 Amps. Do not exceed these limits to prevent damage or safety hazards.

Пакеттин мазмуну

• CHACON EcoWatt 650 Energy Meter (Main Unit with Plug)
• Remote Display Unit with 1.20m Cable
• Колдонуучунун Колдонмосу (бул документ)

Продукт бүттүview

The CHACON EcoWatt 650 consists of two main parts: a main unit that plugs into a wall socket and provides an outlet for your appliance, and a remote display unit connected by a 1.20-meter cable.

1-сүрөт: CHACON EcoWatt 650 Energy Meter, illustrating the main plug-in unit on the left and the remote display unit on the right, connected by a white cable.

2-сүрөт: Жакын план view of the remote display unit, highlighting the LCD screen and control buttons (SET, TOTAL/V, UP/DOWN, MODE, RESET) at the bottom.

Негизги компоненттер:

• Негизги блок: This component plugs directly into a standard wall socket and features an integrated outlet for connecting the appliance you wish to monitor.
• Remote Display Unit: Equipped with an LCD screen and push-button controls, this unit displays various data points. It is connected to the main unit via a 1.20-meter cable, allowing flexible placement.
• Башкаруу баскычтары: The display unit includes buttons labeled SET, TOTAL/V, UP/DOWN (indicated by triangle symbols), MODE, and RESET for navigation and configuration.

Жайгашуу

1. Таңылганын ачуу: Carefully remove the CHACON EcoWatt 650 Energy Meter and its components from the packaging.
2. Кубатка туташуу: Plug the main unit of the EcoWatt 650 into a standard, grounded wall outlet.
3. Appliance Connection: Plug the electrical appliance you intend to monitor into the outlet provided on the main unit of the EcoWatt 650.
4. Баштапкы дисплей: The remote display unit should power on automatically, showing initial readings or a default screen.
5. Дубалга орнотуу (кошумча): The remote display unit can be wall-mounted for convenience. Use appropriate fasteners (not included) for secure installation.

Операция

Негизги мониторинг

Once properly connected, the EcoWatt 650 will immediately begin monitoring the power consumption of the connected appliance. The display will show various data points, which can be cycled through manually.

Setting Time and Tariff

1. басыңыз SET орнотуулар режимине кирүү үчүн баскыч.
2. колдонуу ЖОГОРУ/ТӨМӨН buttons (triangle symbols) to adjust values such as time, day, and tariff rates.
3. Басыңыз SET again to confirm your selection and proceed to the next setting option.
4. The device supports an adjustable double rate feature, allowing for cost calculations based on different electricity tariffs (e.g., peak and off-peak hours). Consult your electricity provider for specific tariff details.

Navigating Display Modes

басыңыз РЕЖИМ button repeatedly to cycle through the available display screens and view different measurement parameters:

• Күч (Вт): Displays the instantaneous power consumption of the connected appliance.
• Керектөө (кВтсаат): Shows the total accumulated energy consumption over time.
• Тtage (Вольт): Indicates the current line voltage from the electrical outlet.
• Ampэрте (Ampс): Displays the current draw of the connected appliance.
• Баасы: Provides a calculated cost based on the accumulated consumption and the configured tariff rates.

Маалыматтарды калыбына келтирүү

To clear all accumulated data, including total consumption and calculated cost, press the RESET button. This action is useful when you wish to start a new monitoring period or clear erroneous readings.

Техникалык тейлөө

• Тазалоо: Түзмөктү жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды, эриткичтерди колдонбоңуз же түзмөктү сууга салбаңыз.
• Сактагыч: Узак мөөнөткө колдонулбаганда, аспапты салкын, кургак жерде, тике күн нурунан жана экстремалдык температурадан алыс сактаңыз.
• Текшерүү: Periodically inspect the power cable and plug for any signs of damage, fraying, or loose connections. Discontinue use if damage is observed.

Проблемаларды чечүү

Display is blank or not showing readings.

Ensure the main unit is securely plugged into a live wall outlet. Verify that the appliance is correctly connected to the meter and is drawing power. Check if the wall outlet itself is functional.

Readings appear incorrect or inconsistent.

Confirm that the connected appliance is operating normally. If cost calculations are inaccurate, review and adjust the tariff settings. Try performing a full reset of the device.

Device does not respond to button presses.

басыңыз RESET button. If the issue persists, unplug the entire unit from the wall outlet for a few minutes, then plug it back in to perform a hard reset.

Техникалык шарттар

Кепилдик жана колдоо

For detailed warranty information, terms and conditions, and technical support, please refer to the documentation provided with your original purchase. You may also visit the official CHACON website for further assistance. Please retain your proof of purchase for any warranty claims.