Hansgrohe ShowerTablet Select 700 Thermostatic Shower Mixer User Manual

Introduction

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Hansgrohe ShowerTablet Select 700 thermostatic shower mixer. Please read all instructions carefully before installation and use to ensure proper function and longevity of the product.

The ShowerTablet Select 700 is a wall-mounted thermostatic mixer designed for exposed installation, featuring two outlets and a safety lock at 40 °C to prevent scalding. Its surface remains cool to the touch due to insulated water conduction.

Коопсуздук маалыматы

• Орнотууну баштоодон мурун бардык суу менен камсыздоо линиялары өчүрүлгөнүн текшериңиз.
• Орнотуу жергиликтүү сантехника жана курулуш нормаларына ылайык квалификациялуу адис тарабынан аткарылышы керек.
• The thermostatic mixer includes a safety stop at 40 °C (104 °F) to prevent accidental scalding. This can be overridden by pressing the safety button.
• Protect the product from frost. Do not install in areas where freezing temperatures may occur.
• Оңдоо үчүн чыныгы Hansgrohe запастык бөлүктөрүн гана колдонуңуз.

Орнотуу жана орнотуу

The Hansgrohe ShowerTablet Select 700 is designed for exposed wall mounting. Proper measurements and water connections are crucial for correct functionality.

Өлчөмдөр жана байланыштар

Refer to Figure 1 for detailed dimensions and connection points. The mixer requires G1/2 connections for hot and cold water. Ensure the distance between the hot and cold water inlets is 150 mm.

Монтаждоо боюнча көрсөтмөлөр

• Дубалга орнотуу: The ShowerTablet Select 700 is designed for wall-mount installation.
• Бийиктиги: For shower applications, the recommended mounting height is approximately 1200 mm from the finished floor. For bathtub applications, mount approximately 150 mm above the rim of the bathtub. Refer to Figure 2 for visual guidance.
• Түздөө: Ensure the mixer is installed perfectly level to prevent water pooling on the integrated shelf.
• Суу менен камсыздоо: Connect the hot water supply to the left inlet and the cold water supply to the right inlet.

Иштөө нускамалары

The ShowerTablet Select 700 offers intuitive control over water temperature and outlet selection.

Температураны көзөмөлдөө

1. Температураны жөндөө: Rotate the control dial on the right side of the mixer (see Figure 3) to set the desired water temperature. Turning towards the left increases hot water, and turning towards the right increases cold water.
2. Коопсуздук токтотуу: The thermostatic mixer is equipped with a safety stop at 40 °C (104 °F). To exceed this temperature, press and hold the small button on the temperature dial while rotating it further to the left.

Outlet Selection

The mixer features two outlets, typically for a hand shower and an overhead shower or bath filler. Each outlet is controlled by a dedicated Select button.

• Activating an Outlet: Press one of the two Select buttons located on the front of the mixer (see Figure 3) to turn on the corresponding water outlet.
• Deactivating an Outlet: Press the active Select button again to turn off the water flow from that outlet.
• Бир нече соода түйүндөрү: Both outlets can be operated simultaneously, depending on water pressure and flow requirements.

Агым ылдамдыгынын мүнөздөмөлөрү

Figure 4 illustrates the flow rate characteristics of the ShowerTablet Select 700. The maximum flow rate at the hand shower connection (Outlet 1) is 30 l/min at 3 bar water pressure. The flow rate for each outlet is dependent on the incoming water pressure and the connected shower components.

Техникалык тейлөө жана кам көрүү

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Hansgrohe ShowerTablet Select 700.

• Тазалоо: Clean the mixer regularly with a soft cloth and a mild, non-abrasive cleaning agent. Avoid using cleaners containing alcohol, hydrochloric acid, formic acid, acetic acid, or phosphoric acid, as these can damage the surface.
• Тазалоо: If limescale deposits occur, use a descaling agent specifically designed for bathroom fixtures. Follow the manufacturer's instructions for the descaler and rinse thoroughly with clean water after application.
• Интегралдык текче: The glass surface of the ShowerTablet Select 700 should be wiped dry after each use to prevent water spots and limescale buildup.
• Чыпкалар: Periodically check and clean the dirt filters located in the water connections to prevent reduced flow or pressure.

Проблемаларды чечүү

If you experience issues with your ShowerTablet Select 700, consult the following common problems and solutions before contacting customer support.

Техникалык шарттар

Кепилдик маалымат

Hansgrohe products are manufactured to the highest quality standards. This product is covered by Hansgrohe's limited warranty. Please refer to the official Hansgrohe webсиздин аймагыңызга тиешелүү кепилдиктин белгилүү бир шарттары жана жоболору үчүн сайтка же сатып алуу документтерине кайрылыңыз.

Typically, the warranty covers manufacturing defects in materials and workmanship under normal use and service. Proof of purchase is required for all warranty claims.

Кардарларды колдоо

For further assistance, technical support, or to inquire about spare parts, please contact Hansgrohe customer service.

• Webсайт: Расмий Hansgrohe дүкөнүнө барыңыз website for contact information, FAQs, and product registration.
• Телефон: Refer to your product packaging or the Hansgrohe webаймактык кардарларды тейлөө телефон номерлери үчүн сайт.
• Ыйгарым укуктуу тейлөө борборлору: For professional service and repairs, locate an authorized Hansgrohe service center near you.