1. Киришүү
This manual provides essential information for the proper installation, maintenance, and care of your Puig 7692C Carbon Look Windshield. Designed specifically for Kawasaki Z1000 motorcycles from 2014 to 2017, this product enhances the aesthetic and aerodynamic profile of your vehicle. Please read these instructions thoroughly before proceeding with installation or use.
2. Продукт бүтүп калдыview
The Puig 7692C Carbon Look Windshield is crafted from high-impact acrylic, offering both strength and flexibility. Its 3mm thickness is engineered to absorb vibrations at high speeds and provide resistance against cracking or scratching. The design is developed through wind tunnel testing to optimize aerodynamic performance and rider comfort.
Image 2.1: Individual components of the Puig 7692C Carbon Look Windshield.
Негизги өзгөчөлүктөрү:
- Материал: High-impact acrylic for durability and flexibility.
- Калыңдыгы: 3mm, designed to reduce vibration and resist damage.
- Дизайн: Aerodynamically optimized through wind tunnel testing.
- Бүтүрүү: Carbon Look for enhanced aesthetic appeal.
3. Коопсуздук маалыматы
Орнотуу жана иштетүү учурунда ар дайым коопсуздукка артыкчылык бериңиз. Бул көрсөтмөлөрдү аткарбоо жаракат алууга же продуктунун же мотоциклдин бузулушуна алып келиши мүмкүн.
- Ensure the motorcycle is stable and securely supported before beginning installation.
- Кол кап жана көздү коргоо сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
- Do not overtighten fasteners, as this can damage the windshield or mounting points.
- Verify all components are correctly installed and secure before operating the motorcycle.
- Эгерде сиз орнотуу процессинин кайсы бир кадамы боюнча күмөн санасаңыз, квалификациялуу мотоцикл механигине кайрылыңыз.
4. Пакеттин мазмуну
Сураныч, орнотууну улантуудан мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз.
- Puig 7692C Carbon Look Windshield (Main Body)
- Mounting Hardware Kit (screws, washers, spacers, brackets as applicable)
- Орнотуу боюнча нускамалар (бул документ)
5. Орнотуу жана орнотуу
The following steps outline the general procedure for installing the Puig 7692C Windshield. Specific details may vary slightly depending on your motorcycle's exact configuration. Refer to your motorcycle's service manual for specific torque specifications if available.
- Мотоциклди даярдоо: Мотоциклди тегиз жерге токтотуп, анын туруктуу болушун камсыз кылыңыз. Моторду өчүрүп, от алдыруу ачкычын алып салыңыз.
- Монтаждоо пункттарын аныктоо: Locate the designated mounting points on your Kawasaki Z1000 (2014-2017) for the windshield. These are typically around the headlight or instrument cluster area.
- Attach Brackets (if applicable): If separate mounting brackets are provided, attach them to the motorcycle using the specified hardware. Do not fully tighten at this stage.
- Алдын ала айнекти жайгаштырыңыз: Carefully align the Puig windshield with the mounting brackets or direct mounting points.
- Алдын ала айнекти бекитиңиз: Insert the provided screws and fasteners through the windshield and into the mounting points or brackets. Hand-tighten all fasteners initially.
- Тегиздөө: Once all fasteners are in place, adjust the windshield for optimal alignment and fitment.
- Акыркы бекемдөө: Systematically tighten all fasteners to the manufacturer's recommended torque specifications. Avoid overtightening.
- Акыркы текшерүү: Double-check all connections to ensure they are secure and that the windshield is firmly attached without any play.
Image 5.1: Puig 7692C Windshield installed on a Kawasaki Z1000.
Сүрөт 5.2: Детальдуу view of the Puig 7692C Windshield mounting area on a Kawasaki Z1000.
6. Техникалык тейлөө
Proper care will extend the life and maintain the appearance of your Puig windshield.
- Тазалоо: Use a soft cloth and mild soap with water to clean the windshield. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the acrylic surface.
- Кургатуу: Dry with a clean, soft microfiber cloth to prevent water spots and scratches.
- Текшерүү: Periodically check all mounting hardware for tightness. Vibrations during riding can cause fasteners to loosen over time.
- Зыян: If the windshield sustains significant damage (cracks, deep scratches), consider replacement to maintain structural integrity and clear visibility.
7. Кыйынчылыктарды
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Ашыкча титирөө | Loose mounting hardware. Incorrect installation. | Check and tighten all mounting screws. Ensure all components are correctly seated. |
| Poor Fitment | Incorrect model application. Misaligned components. | Verify the windshield is the correct model (7692C) for your Kawasaki Z1000 (2014-2017). Re-align and re-install components carefully. |
| Scratches/Hazing | Improper cleaning methods. Abrasive materials used. | Use only soft cloths and mild soap for cleaning. Avoid dry wiping or harsh chemicals. Minor scratches may be polished with specialized acrylic polish. |
8. Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Модель номери | 7692C |
| Бренд | puig |
| Материал | Жогорку таасирдүү акрил |
| Түс | Carbon Look |
| Калыңдыгы | 3мм |
| Шайкеш унаа | Kawasaki Z1000 (2014-2017) |
| Элемент Салмагы | 2.43 фунт |
| Продукциянын өлчөмдөрү | 22 x 18 x 10 дюйм |
9. Кепилдик жана колдоо
Продукциянын кепилдиги жөнүндө маалымат алуу үчүн, расмий Puig сайтына кайрылыңыз website or contact your authorized Puig dealer. Warranty terms and conditions may vary by region and retailer.
For technical support or further inquiries, please visit the official Puig website or contact their customer service department. You may also refer to the seller from whom you purchased this product.
Puig Official Webсайт: www.puig.tv
