1. Киришүү
This manual provides essential information for the proper installation, operation, and maintenance of your Diesel Wiper WT632 Wiper Blade Assembly. Designed for recreational vehicles, this heavy-duty wiper blade ensures clear visibility under various conditions.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Durable metal construction for longevity.
- Heavy-duty natural rubber wiping element for effective performance.
- Designed to fit a wide range of RV wiper arms with included adaptors.
- Blade length: Approximately 40 inches (1000mm).
2. Пакеттин мазмуну
Таңгакты ачканда, бардык компоненттердин бар экенин жана бузулбаганын текшериңиз. Таңгакта төмөнкүлөр болушу керек:
- 1 x Diesel Equipment (Truvision) WT6-32 Heavy Duty Blade Assembly (approximately 40 inches / 1000mm in length).
Figure 2.1: Diesel Wiper WT632 Wiper Blade Assembly. This image shows the full length of the black wiper blade assembly, highlighting its robust metal frame and rubber wiping edge.
3. Орнотуу жана орнотуу
Туура орнотуу оптималдуу аткаруу жана коопсуздук үчүн өтө маанилүү болуп саналат. Бул кадамдарды кылдаттык менен аткарыңыз:
- Унааны даярдоо: Park your vehicle on a level surface and turn off the ignition. Lift the existing wiper arm away from the windshield until it locks into the upright position. Place a towel or protective cloth on the windshield to prevent damage if the arm accidentally falls.
- Эски тазалагыч бычакты алып салуу: Identify the attachment point of your current wiper blade. The WT632 typically uses a "Pinch Tab" mounting type. Press the small tab on the wiper arm connector and slide the old blade off the arm. Some older models may require a different removal method; consult your vehicle's manual if unsure.
- Жаңы тазалагыч бычакты тиркөө: Align the new Diesel Wiper WT632 blade's connector with the wiper arm's hook or pinch tab mechanism. Slide the blade onto the arm until it clicks securely into place. Gently pull on the blade to ensure it is firmly attached.
- Төмөнкү тазалагыч колу: Carefully lower the wiper arm back onto the windshield. Ensure the blade lies flat against the glass.
- Сыноо операциясы: Before driving, activate your vehicle's wipers to ensure the new blades operate smoothly and clear the windshield effectively. Check for any obstructions or unusual noises.
Note: If your vehicle uses a different wiper arm type, adaptors may be required. The Diesel Wiper WT632 is designed for easy installation onto most wiper arms, but specific vehicle models may vary.
4. Операция
The Diesel Wiper WT632 Wiper Blade Assembly operates in conjunction with your vehicle's existing wiper system. Once installed, the blades will function automatically when the wiper controls are activated. Ensure your windshield is wet before operating wipers to prevent damage to the blade or windshield.
- үзгүлтүксүз колдонуу: Use wipers as needed during rain, snow, or when the windshield is dirty.
- Алдыңкы айнек жуугуч суюктугу: Always use windshield washer fluid to lubricate the windshield and assist in cleaning, especially when removing stubborn dirt or debris.
5. Техникалык тейлөө жана кам көрүү
To extend the lifespan and maintain the performance of your Diesel Wiper WT632 blades, follow these maintenance tips:
- үзгүлтүксүз тазалоо: Periodically clean the rubber wiping element with a soft cloth or sponge and mild soap and water. Wipe along the length of the blade to remove dirt, grime, and road film. Rinse thoroughly.
- Зыянды текшерүү: Regularly inspect the rubber blade for cracks, tears, or hardening. Also, check the metal frame for bends or corrosion. Damaged blades should be replaced promptly.
- Кургак сүртүүдөн качыңыз: Never operate the wipers on a dry windshield, as this can damage the rubber blade and scratch the glass. Always use windshield washer fluid or water.
- Кышкы кам көрүү: In freezing conditions, ensure blades are not frozen to the windshield before operation. Gently lift them away from the glass or use a defroster. Do not use hot water, as it can crack the windshield.
6. Кыйынчылыктарды
If you experience issues with your wiper blades, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Стрейк же сыздоо | Dirty blade, worn rubber, bent wiper arm, or windshield contamination. | Бычакты жарнама менен тазалаңызamp cloth. If streaking persists, inspect the rubber for wear and replace if necessary. Check wiper arm for proper pressure. Clean windshield thoroughly. |
| Макулдашуу же Өтүү | Blade angle incorrect, dry windshield, or hardened rubber. | Ensure windshield is wet during operation. Check if the wiper arm is bent, causing improper blade contact. Replace blade if rubber is hardened. |
| Толук эмес тазалоо аймагы | Worn blade, incorrect blade length, or weak wiper arm spring. | Inspect blade for wear and replace if necessary. Verify correct blade length for your vehicle. Consult a professional if wiper arm spring is weak. |
7. Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Бренд | Дизель |
| Модель номери | WT632 |
| OEM бөлүктүн номери | WT6-32 |
| Продукт түрү | Auto Accessory (Wiper Blade Assembly) |
| Унаа кызматынын түрү | Car (Recreational Vehicle) |
| Fit түрү | Унаанын өзгөчө ылайыктуулугу |
| Элементтин узундугу | Болжол менен 40 дюйм (1000 мм) |
| Монтаж түрү | Чымчып өтмөк |
| Элемент Салмагы | 1 фунт |
| Келип чыккан өлкө | Кытай |
8. Кепилдик маалыматы
Specific warranty details for the Diesel Wiper WT632 Wiper Blade Assembly are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact Diesel customer support directly. Keep your proof of purchase for any warranty claims.
9. Кардарларды колдоо кызматы
If you have any questions, require assistance with installation, or encounter issues not covered in this manual, please contact Diesel customer support. Visit the official Diesel webсайтына кириңиз же байланыш маалыматы үчүн продуктуңуздун таңгагын караңыз.
Көбүрөөк маалымат алуу үчүн, сиз иш сапары менен болот Diesel Store on Amazon.
