Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Rockville RW10CA 10-inch Slim Active Powered Car Subwoofer. Please read this manual thoroughly before using your new subwoofer to ensure proper setup and optimal performance. Keep this manual for future reference.
Коопсуздук нускамалары
- Always ensure proper ventilation around the subwoofer to prevent overheating.
- Агрегатты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
- Disconnect the vehicle's battery before performing any electrical connections.
- Use appropriate gauge wiring for power and ground connections to prevent fire hazards.
- Securely mount the subwoofer to prevent movement during vehicle operation.
- Орнотуу кадамдарына ишене албасаңыз, профессионал унаа аудио орнотуучусуна кайрылыңыз.
Өзгөчөлүктөрү
- High-Power Bass Output: Delivers 800W peak and 200W RMS for deep, clean bass.
- Slim Low-Profile Дизайн: Only 2.7" tall, fits under seats or in tight spaces.
- Камтылган Ampөмүр берүүчү: Интеграцияланган amplifier with adjustable input sensitivity, 50Hz-150Hz low-pass filter, and bass boost.
- Оңой орнотуу: Includes remote bass knob and mounting hardware for straightforward setup.
- Кеңири шайкештик: Features high-level inputs with auto turn-on, compatible with most OEM or aftermarket car stereos.
- Thermal Protection Circuitry: Prevents overheating for safe and reliable operation.
Пакеттин мазмуну
- Жабылган сабвуфер
- Алыстан башкаруу баскычы
- Remote Bass Knob Wire
- Монтаждоо бурамалар жана аппаратура
- High Level Input Wire
- Колдонуучунун Колдонмосу (бул документ)
Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Киргизүү көлөмүtage | 12 вольт |
| Монтаж түрү | Car Mount |
| Материал | Пластик |
| Модель аты | RW10CA |
| Динамик түрү | Сабвуфер |
| Өзгөчө өзгөчөлүк | Коргоо |
| Шайкеш түзмөктөр | MP3 ойноткуч, смартфон, планшет |
| Сабвуфердин диаметри | 10 дюйм |
| Продукциянын өлчөмдөрү | 12.4"D x 13.4"W x 2.7"H |
| Элемент Салмагы | 14.3 фунт |
| Импеданс | 2 Ом |
| Динамиктин максималдуу чыгаруу күчү | 800 Ватт |
| Frequency Response | 150 Гц |
| Байланыш технологиясы | Зымдуу |
| Аудио чыгаруу режими | Моно |
Орнотуу жана орнотуу
The Rockville RW10CA is designed for easy installation in various vehicle types. Its slim profile allows for flexible placement options.
Жайгаштыруу параметрлери
Due to its ultra-slim design (2.7" height), the RW10CA can be installed in tight spaces, such as:
- Under the driver's or passenger's seat.
- In the trunk or cargo area.
- Mounted to the back of a seat.

Image: The Rockville RW10CA subwoofer discreetly installed under a car seat, demonstrating its low-profile дизайн.

Image: Visual representation of the ultra-slim dimensions of the Rockville RW10CA, highlighting its compact size for versatile placement.
Зымдарды туташтыруу
Ensure all connections are secure and properly insulated. Refer to the diagram below for terminal locations.

Image: The control panel of the RW10CA, illustrating the various input and power terminals for connection.
- Кубаттуулугу (+12V): Connect this terminal to the positive (+) terminal of your vehicle's battery. Use appropriate gauge power wire and an inline fuse (25A, included).
- Алыстан (REM): Connect this terminal to the remote turn-on lead from your head unit or an ignition-switched 12V source. This allows the subwoofer to turn on/off with your vehicle's audio system.
- Жер (GND): Connect this terminal to a clean, unpainted metal surface on the vehicle's chassis. Ensure a solid ground connection to prevent noise.
- Төмөн деңгээлдеги RCA киргизүү: Use RCA cables to connect your head unit's RCA outputs to the subwoofer's low-level inputs (L and R). This is the preferred method for optimal sound quality.
- Жогорку деңгээлдеги киргизүү: If your head unit does not have RCA outputs, use the included high-level input wire harness. Connect the speaker wires from your head unit's speaker outputs to the corresponding terminals on the harness (L+, L-, R+, R-), then plug the harness into the "HI INPUT" port on the subwoofer.
- Алыскы басс баскычы: Plug the remote bass knob wire into the "SUB LEVEL REMOTE CONTROL" port. Mount the remote knob in a convenient location for easy bass level adjustment.
Video: This video provides a detailed guide on how to set up your Rockville RW10CA subwoofer, covering all necessary connections and initial configurations.
Video: An explanation of the various wires, inputs, and outputs on the Rockville RW10CA, detailing their functions and proper connection methods.
Иштетүү башкаруу элементтери
The RW10CA features several adjustable controls to fine-tune your bass output to your preference.

Сүрөт: жакын план view of the RW10CA's control panel, showing the adjustable knobs for phase, low pass filter, bass boost, and input gain.
- Power Status (Green/Red): The green LED indicates the unit is powered on and operating normally. The red LED indicates a protection mode (e.g., overheating, short circuit).
- Auto Turn On (On/Off): When set to "ON", the subwoofer will automatically turn on when an audio signal is detected through the high-level inputs. When set to "OFF", the remote turn-on lead (REM) must be used.
- Phase Shift (0°/180°): This switch allows you to change the phase of the subwoofer's output. Adjust this to ensure the subwoofer's bass output is in sync with the rest of your car's speakers, preventing cancellation or muddy sound.
- Low Pass Filter (50Hz - 150Hz): This adjustable crossover allows you to set the upper frequency limit for the subwoofer. Frequencies above the set point will be filtered out, ensuring only low bass notes are reproduced by the subwoofer.
- Bass Boost (0dB - +18dB @ 45Hz): This control allows you to increase the bass output at 45Hz, providing a more pronounced low-end response. Adjust to your preference.
- Input Gain (Min/Max): Бул баскыч киргизүү сигналынын сезгичтигин тууралайт amplifier. It should be set to match the output level of your head unit. Start at minimum and slowly increase until you hear distortion, then back off slightly.

Image: The remote bass knob, allowing convenient adjustment of the subwoofer's output level from the driver's seat.
Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your Rockville RW10CA subwoofer.
- Тазалоо: Use a soft, dry cloth to clean the exterior of the subwoofer. Avoid using harsh chemicals or abrasive cleaners.
- Туташуу текшерүү: Мезгил-мезгили менен бардык зымдарды байланыштарды текшерип, алар бекем жана коррозияга учурабайт.
- Вентиляция: Ensure the subwoofer's heat sinks are not obstructed to allow for proper cooling.
Проблемаларды чечүү
If you experience issues with your RW10CA, refer to the following common problems and solutions:
- Кубат жок: Check the power (+12V), remote (REM), and ground (GND) connections. Ensure the inline fuse is not blown. Verify the vehicle's battery has sufficient charge.
- Үн жок: Check all audio input connections (RCA or high-level). Verify the head unit is sending an audio signal. Adjust the "Input Gain" knob. Ensure the "Low Pass Filter" is set appropriately.
- Бурмаланган үн: Reduce the "Input Gain" setting. Check for damaged speaker wires or loose connections. Ensure the head unit's volume is not excessively high.
- Subwoofer Overheating (Red Protection LED): Ensure adequate ventilation around the unit. Reduce the "Input Gain" or "Bass Boost" settings. Check for impedance mismatches or short circuits in the wiring.
Кепилдик жана колдоо
The Rockville RW10CA 10-inch Slim Active Powered Car Subwoofer comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official Rockville webсайт.
For technical support, troubleshooting assistance, or any other inquiries, please contact Rockville customer support:
- Webсайт: www.rockvilleaudio.com
- Электрондук почта: support@rockvilleaudio.com
- Телефон: 1-646-758-0144 (Open 24/7)





