Parkside High-Pressure Cleaner Gun and Nozzle Kit Instruction Manual

1. Киришүү

This manual provides essential information for the safe and effective use of your Parkside High-Pressure Cleaner Gun and Nozzle Kit. Please read these instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.

1.1 Пакеттин мазмуну

• 1 x High-Pressure Spray Gun (Part No. 91097260)
• 1 x Jet Tube with High-Pressure Nozzle (Dirt Blaster) (Part No. 91097404)

This image displays the two main components of the kit: the black and yellow high-pressure spray gun at the top, and the black dirt blaster jet tube with a high-pressure nozzle at the bottom.

2. Жалпы коопсуздук нускамалары

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. High-pressure cleaners can be dangerous if not used correctly.

• Бардык нускамаларды окуңуз: Familiarize yourself with the operation and warnings of both this kit and your high-pressure cleaner.
• Тийиштүү жеке коргонуу каражаттарын (ЖКК) кийиңиз: This includes safety glasses, hearing protection, and protective footwear.
• Never point the spray gun at people, animals, or electrical equipment: The high-pressure jet can cause serious injury.
• Ensure secure connections: Before operating, verify that all connections between the gun, nozzle, and high-pressure cleaner are tight and secure.
• Do not modify the product: Any modifications can compromise safety and void the warranty.
• Балдарды жана жанындагыларды алыс кармаңыз: Maintain a safe distance from the operating area.
• Электр кубатын өчүрүү: Always disconnect the high-pressure cleaner from the power supply before performing any maintenance or assembly.

3. Шайкештик

This Parkside High-Pressure Cleaner Gun and Nozzle Kit is specifically designed for use with the following Parkside PHD 150 series high-pressure cleaners:

• Parkside High-Pressure Cleaner PHD 150 A1 (IAN 55991 + 68584)
• Parkside High-Pressure Cleaner PHD 150 B2 (IAN 78960)
• Parkside High-Pressure Cleaner PHD 150 C2 (IAN 93482)
• Parkside High-Pressure Cleaner PHD 150 D3 (IAN 102798 + 270433)

Маанилүү эскертүү: Бул комплект жок suitable for the original PHD 150 model or any models in the PHD100XX series. Please verify your high-pressure cleaner's model and IAN number for compatibility before use.

4. Орнотуу жана чогултуу

Follow these steps to correctly assemble the high-pressure gun and nozzle with your compatible Parkside high-pressure cleaner.

1. Prepare the High-Pressure Cleaner: Ensure your high-pressure cleaner is switched off and disconnected from the power supply. Release any residual pressure in the system by briefly pressing the trigger on the old gun (if attached).
2. Connect the High-Pressure Hose to the Gun: Take the new high-pressure spray gun. Connect the high-pressure hose from your cleaner to the inlet on the gun handle. Twist or push until it clicks securely into place, depending on your cleaner's connection type. Ensure a tight, leak-free connection.
3. Attach the Jet Tube with Nozzle: Insert the jet tube with the dirt blaster nozzle into the front end of the spray gun. Push firmly and twist clockwise until it locks into position. Verify that the nozzle is securely attached and cannot be easily pulled out.
4. Агышууларды текшерүү: Before starting the cleaner, connect the water supply and briefly turn it on (without power to the cleaner) to check for any leaks at the connections. Tighten if necessary.

5. Иштөө нускамалары

Once the gun and nozzle are correctly assembled and connected to your high-pressure cleaner, follow these general operating guidelines:

• Тазалоочуну ишке киргизиңиз: Ensure the water supply is fully open. Turn on your high-pressure cleaner.
• Триггерди иштетүү: Point the nozzle away from yourself and others. Press the trigger on the spray gun to begin the high-pressure water flow.
• Dirt Blaster Nozzle: The included dirt blaster nozzle provides a powerful, rotating jet for stubborn dirt and grime. Hold it at an appropriate distance from the surface to avoid damage.
• Контролду сактоо: The high-pressure jet can create recoil. Hold the gun firmly with both hands to maintain control.
• Операцияны токтотуу: To stop the water flow, release the trigger. For extended breaks or when finished, switch off the high-pressure cleaner and disconnect it from the power supply.
• Release Residual Pressure: After switching off the cleaner, briefly press the trigger to release any remaining pressure in the system before disconnecting hoses or attachments.

6. Техникалык тейлөө жана кам көрүү

Proper maintenance ensures the longevity and optimal performance of your high-pressure gun and nozzle kit.

• Тазалоо: After each use, rinse the gun and nozzle with clean water to remove any detergent residue or debris.
• Соплолорду тазалоо: If the nozzle becomes clogged, use the provided nozzle cleaning needle (usually supplied with the high-pressure cleaner) to clear any blockages.
• Байланыштарды текшерүү: Regularly check all connections for wear, damage, or leaks. Replace worn O-rings or seals as needed.
• Сактагыч: Store the gun and nozzle in a clean, dry, and frost-free environment. Protect them from direct sunlight and extreme temperatures.
• Суукка жол бербөө: Ensure all water is drained from the gun and nozzle before storing in freezing conditions to prevent damage.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with the high-pressure gun and nozzle.

8. Техникалык шарттар

9. Кепилдик жана колдоо

This product is covered by the standard manufacturer's warranty. Please refer to the warranty documentation provided with your original high-pressure cleaner for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact Parkside customer service or your authorized dealer. Keep your purchase receipt and product model information readily available.