HI-Link HLK-PM01 AC-DC 220Vден 5Vге чейинки төмөндөтүүчү кубат булагы модулунун колдонуу боюнча колдонмосу

1. Киришүү

This manual provides essential information for the safe and effective use of the HI-Link HLK-PM01 AC-DC 220V to 5V Step-Down Power Supply Module. The HLK-PM01 is a compact, high-efficiency power module designed to convert AC input voltage (90-264V) to a stable 5V DC output. It is suitable for various applications requiring a small, reliable power source, such as intelligent household switch control devices.

2. Продукциянын өзгөчөлүктөрү

• Ultra-thin, subminiature design for space-constrained applications.
• Толук томtage input range: 90 ~ 264 Vac.
• Туруктуу электр энергиясын жеткирүү үчүн аз толкун жана аз ызы-чуу чыгаруу.
• Integrated output overload and short circuit protection functions.
• Жогорку натыйжалуулук жана кубаттуулук тыгыздыгы.
• EMC жана коопсуздук сыноо талаптарына жооп берүү үчүн иштелип чыккан.
• Low power consumption with no-load loss less than 0.1 W, promoting energy efficiency.
• 100% load tested for reliability.
• Vibration coefficient of 10 ~ 500 Hz, 2g/10min. / 1 Cycle, 60 Min. each along the X, Y, Z axes.

3. Коопсуздук маалыматы

Орнотуудан жана иштетүүдөн мурун бардык коопсуздук көрсөтмөлөрүн окуп чыгып, түшүнүп алыңыз. Бул көрсөтмөлөрдү аткарбоо электр тогуна урунууга, өрткө же башка коркунучтарга алып келиши мүмкүн.

• Электр коркунучу: This module operates with high AC voltages. Installation and handling should only be performed by qualified personnel. Ensure power is disconnected before making any connections.
• Изоляция: Ensure proper insulation is maintained between AC input and other components, as well as between input and output.
• Температура: The shell surface maximum temperature should not exceed 60 degrees Celsius during operation. Ensure adequate ventilation.
• Сертификаттар: The product design aims to meet the requirements of UL and CE safety certifications. Users are advised to verify specific certifications for their intended application and region, as regulatory compliance can vary.
• Курчап турган чөйрө: Модулду нымдуулукка, өтө жогорку температурага же коррозиялуу чөйрөлөргө дуушар кылбаңыз.

4. Продукт бүтүп калдыview

4.1-сүрөт: Жогорку View. This image displays the top surface of the HLK-PM01 module, clearly showing the 'HI-Link' brand logo, input voltage range (100-240VAC), output specifications (5VDC, 0.6A, 3W), and part number (P/N: HLK-PM01). The AC input terminals and DC output terminals (+Vo, -Vo) are also labeled.

4.2-сүрөт: Бурчтуу View. An angled perspective of the HLK-PM01 module, providing a clearer view of the pin configuration for both AC input and DC output. This view helps in understanding the physical layout for integration into a circuit board.

4.3-сүрөт: Төмөнкү View. This image shows the underside of the HLK-PM01 module, revealing the through-hole pins for soldering. The arrangement of these pins is critical for proper mounting and electrical connection to a PCB.

5. Техникалык шарттар

6. Орнотуу жана орнотуу

The HLK-PM01 module is designed for integration into electronic circuits, typically by soldering onto a Printed Circuit Board (PCB).

1. Даярдоо: Ensure all power sources are disconnected before beginning installation. Gather necessary tools, including a soldering iron, solder, and appropriate safety gear.
2. Pin идентификациясы: Refer to Figure 4.1 and 4.2 for pin identification. The module has two AC input pins and two DC output pins (+Vo, -Vo).
3. Монтаждоо: Carefully align the module's pins with the corresponding holes on your PCB. Note that the pin spacing may not be compatible with standard 0.1" proto boards, requiring careful alignment or adaptation.
4. ширетүү: Solder the module's pins securely to the PCB. Ensure good solder joints for reliable electrical contact. Avoid excessive heat that could damage the module.
5. Киргизүү байланышы: Connect the AC input lines (90-264V) to the designated AC input pins. Ensure proper polarity if applicable, though AC input is typically non-polarized.
6. Чыгуу туташуу: Connect your load to the +Vo (positive) and -Vo (negative) DC output pins. Verify correct polarity for your connected device.
7. Insulation and Clearance: After soldering, inspect for any short circuits or inadequate insulation, especially between the high-voltage AC input side and other parts of your circuit. Maintain sufficient clearance to prevent arcing.
8. Акыркы текшерүү: Before applying power, perform a thorough visual inspection of all connections.

7. Иштөө нускамалары

Once the HLK-PM01 module is correctly installed and connected, operation is straightforward:

1. Киргизүү кубатын колдонуңуз: Connect the AC power source (within the 90-264V range) to the module's AC input terminals.
2. Verify Output: The module will automatically convert the AC input to a stable 5V DC output. Use a multimeter to verify the 5V DC output at the +Vo and -Vo terminals before connecting sensitive loads.
3. Туташуу жүктөө: Connect your 5V DC compatible device or circuit to the output terminals. Ensure the total current draw of your load does not exceed 0.6A.

Модуль көрсөтүлгөн параметрлердин чегинде үзгүлтүксүз иштөө үчүн иштелип чыккан.

8. Техникалык тейлөө

The HLK-PM01 module is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance and longevity:

• Визуалдык текшерүү: Periodically inspect the module and its connections for any signs of physical damage, overheating (discoloration), or loose solder joints.
• Тазалык: Keep the module free from dust, dirt, and debris, which can impede heat dissipation. Use a soft, dry brush or compressed air for cleaning.
• Курчап турган чөйрө: Иштөө чөйрөсү белгиленген температуранын жана нымдуулуктун чегинде болушун камсыз кылыңыз.
• Вентиляция: Confirm that the module has adequate airflow, especially if enclosed, to prevent excessive heat buildup.

9. Кыйынчылыктарды

If the HLK-PM01 module is not functioning as expected, consider the following troubleshooting steps:

• No Output Voltage:
  • Verify that the AC input power is present and within the 90-264V range using a multimeter.
  • Check all input and output connections for proper soldering and continuity.
  • Ensure there are no short circuits on the output terminals or connected load. The module has short circuit protection, which may temporarily shut down output.
• Туура эмес чыгаруу томtage:
  • Чыгуу көлөмүн өлчөөtage with a calibrated multimeter. If it deviates significantly from 5V, the module may be faulty or overloaded.
  • Ensure the load current does not exceed the maximum rated 0.6A. Overloading can cause voltage drop or module shutdown.
• Ашыкча ысып кетүү:
  • Reduce the load if it is close to or exceeding 0.6A.
  • Improve ventilation around the module.
  • Verify ambient temperature is not excessively high.
• Модуль күйбөйт:
  • Recheck all wiring for correct connections and polarity.
  • Inspect for any visible damage to the module.

If issues persist after troubleshooting, contact the manufacturer or seller for further assistance.

10. Кепилдик жана колдоо

Specific warranty details for the HI-Link HLK-PM01 module may vary depending on the seller and region of purchase. Please refer to your purchase documentation or contact your retailer for information regarding warranty coverage.

For technical support or inquiries not covered in this manual, please contact the HI-Link customer support or your product supplier. When contacting support, please provide your product model (HLK-PM01) and a detailed description of the issue.