1. Продукт бүтүп калдыview
Америкалык стандарттык Champion Universal Replacement Flush Valve is an authentic American Standard part, engineered to the same exacting specifications as the original products. This ensures reliable performance and compatibility with your American Standard toilet system. It is designed for use with any Champion line of two-piece toilets.
Негизги өзгөчөлүктөрү:
- Universal replacement part for Champion 4 flushing systems.
- Compatible with any Champion line of two-piece toilets.
- Includes a 7-inch tube.
- Features a 3/4-inch chain length.
- Genuine American Standard OEM replacement part.
2. Орнотуу боюнча нускамалар
Follow these steps carefully to replace your flush valve. It is recommended to watch the official installation video for visual guidance.
2.1. Даярдоо
- Ажатканага суу берүүнү өчүрүңүз.
- Flush the toilet to drain the tank completely.
- Танктын капкагын алып салыңыз.
2.2. Removing the Old Flush Valve
- Disconnect the bead chain from the trip lever arm by removing the hairpin and clevis pin.
- Remove the refill tube clip from the overflow tube and allow the tube to hang inside the tank.
- From the underside of the tank, loosen the tank nut using a wrench.
- Remove the tank nut and gasket.
- Carefully pull the old flush valve body out from the inside of the tank.
Image 1: Components of the American Standard Champion Universal Replacement Flush Valve.
2.3. Installing the New Flush Valve
- Insert the new flush valve body into the tank opening from the inside. Ensure it is seated correctly.
- From the underside of the tank, while holding the flush valve in place, attach the new gasket, then the tank nut.
- Tighten the tank nut securely with the provided wrench. Avoid overtightening to prevent damage.
- Reattach the bead chain loop to the trip lever arm using the clevis pin and secure it with the hairpin.
- Push the refill clip onto the refill tube and reinsert it into the overflow tube.
Image 2: The flush valve with the specialized wrench for tightening the tank nut.
2.4. Акыркы кадамдар
- Turn on the water supply to the toilet.
- Allow the tank to fill and check for any leaks around the flush valve and tank connections.
- Test the flush mechanism several times to ensure proper operation.
2.5. Орнотуу боюнча видео көрсөтмө
Video 1: Official installation guide for the American Standard Champion Universal Replacement Flush Valve. This video demonstrates the step-by-step process of removing the old valve and installing the new one, including handling the chain, refill tube, and tightening the tank nut.
3. Операция
Америкалык стандарттык Champion Universal Replacement Flush Valve operates by lifting the flapper to release water from the tank into the toilet bowl when the flush lever is pressed. Upon release of the lever, the flapper reseals, allowing the tank to refill.
4. Техникалык тейлөө
Regular maintenance helps ensure the longevity and efficient operation of your flush valve.
- Мөөрдү текшерүү: Periodically check the blue seal (American Standard 7301111-0070A) for wear, cracks, or mineral buildup. A worn seal is a common cause of leaks.
- Таза компоненттери: If you notice slow refilling or incomplete flushing, inspect the valve components for debris or mineral deposits and clean as necessary.
- Чынжырдын узундугун текшерүү: Ensure the chain connecting the trip lever to the flapper is not too tight or too loose. It should have a slight slack to allow the flapper to fully close.
5. Кыйынчылыктарды
Бул жерде сиз кабылышы мүмкүн болгон жалпы маселелерди чечүү жолдору бар:
- Continuous Water Flow (Leaking): If water continuously runs into the bowl, the flush valve seal may be compromised or the chain might be too short, preventing the flapper from fully seating. Inspect and replace the seal if worn, or adjust the chain length.
- Алсыз же толук эмес агызуу: This could be due to insufficient water in the tank or the flapper closing too quickly. Ensure the water level is correct and check the chain for proper slack.
- Tank Not Filling: Verify the water supply is fully open. If the fill valve is the issue, it may need adjustment or replacement.
6. Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Бренд | Америка стандарты |
| Модель номери | 3174.105-0070A |
| Элемент Салмагы | 12.3 унция |
| Продукциянын өлчөмдөрү | 14 x 5.5 x 5.5 дюйм |
| Сырткы бүтүрүү | Дат баспаган болот |
| Inlet Connection Size | 7 дюйм |
| Inlet Connection түрү | Barb |
| Розетка туташуу түрү | Barb |
| Порттардын саны | 2 |
| Розетка туташуу өлчөмү | 7 дюйм |
| Элементтин пакетинин саны | 1 |
| Камтылган компоненттер | Replacement Flush Valve |
7. Кепилдик маалыматы
This American Standard product comes with a Чектелген бир жылдык кепилдик. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official American Standard webсайт.
8. Кардарларды колдоо кызматы
For further assistance, technical support, or to inquire about replacement parts, please contact American Standard customer service. You can find contact information on the official American Standard webсайтка же продуктунун таңгагы аркылуу.
зыярат кылыңыз Америкалык стандарт дүкөнү көбүрөөк өнүмдөр жана маалымат үчүн.
