1. Продукт бүтүп калдыview
The Schneider Electric TeSys Deca LAD-8N20 is an instantaneous auxiliary contact block designed for use with LC.D contactors and CAD control relays, specifically those with AC coils. This unit provides two Normally Open (2NO) contacts, rated for up to 10A at 690V AC. It features screw clamp terminals for secure electrical connections and is designed for clip-on side mounting, ensuring reliable and durable performance within control systems.
1-сүрөт: Фронт view of the Schneider Electric TeSys Deca Auxiliary Contact Block LAD-8N20. This image displays the compact design, screw clamp terminals, and product labeling including "Telemecanique" and "LAD8N11" (note: the model number in the image might be a variant or part of a series, the product being described is LAD-8N20), along with contact designations (NO, NC) and terminal numbers.
TeSys Deca contactors and their accessories are engineered for seamless integration into various control applications, offering quick and straightforward setup while maintaining a compact form factor. This product adheres to multiple international standards, including IEC, UL, CSA, CCC, and EAC, ensuring broad compatibility and safety compliance.
2. Орнотуу жана орнотуу
2.1 Коопсуздук чаралары
- Орнотууну баштоодон мурун, электр тогуна урунбоо үчүн бардык электр энергиясын өчүрүп коюңуз.
- Installation should be performed by qualified personnel familiar with electrical systems and local wiring codes.
- тtage and current ratings of the auxiliary contact block are compatible with the application.
2.2 Монтаждоо
The LAD-8N20 auxiliary contact block is designed for clip-on side mounting onto compatible LC.D contactors or CAD control relays. Align the contact block with the designated mounting slots on the side of the main device and firmly press until it clicks into place. Ensure a secure mechanical connection.
2.3 Электр зымдары
This unit utilizes screw clamp terminals for electrical connections. The block provides two Normally Open (2NO) contacts. Identify the terminal markings for the NO contacts. Use appropriate gauge wire for the rated current (up to 10A). Strip the wire insulation to the recommended length, insert the wire into the terminal opening, and tighten the screw firmly to ensure a good electrical connection. Avoid over-tightening.
- Адатта ачык (ЖОК) байланыштар: These contacts are open when the main contactor/relay is de-energized and close when it is energized.
3. Операция
The LAD-8N20 auxiliary contact block operates in conjunction with the main LC.D contactor or CAD control relay to which it is attached. When the main contactor/relay coil is energized, its main contacts change state, and simultaneously, the auxiliary contacts on the LAD-8N20 also change state. Since this block provides 2NO contacts, these contacts will close when the main device is energized and open when it is de-energized.
These auxiliary contacts are typically used for control circuit applications, such as signaling, interlocking, or providing feedback on the status of the main contactor/relay. They are not intended for direct power switching of high-current loads.
4. Техникалык тейлөө
The Schneider Electric TeSys Deca auxiliary contact block is designed for high reliability and durability, requiring minimal maintenance. However, periodic inspection is recommended to ensure optimal performance and safety.
- Визуалдык текшерүү: Физикалык бузулуунун, түстүн өзгөрүшүнүн же бош байланыштын белгилерин дайыма текшерип туруңуз.
- Терминалдын тыгыздыгы: Мезгил-мезгили менен бардык бурама clamp terminals remain securely tightened.
- Тазалоо: If necessary, gently clean the exterior of the contact block with a dry, lint-free cloth. Do not use solvents or abrasive cleaners.
- Экологиялык шарттар: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature wear or malfunction.
5. Кыйынчылыктарды
If the auxiliary contact block does not function as expected, consider the following troubleshooting steps:
- Байланышты өзгөртүү жок:
- Verify that the main contactor or control relay is properly energized and operating.
- Check the mechanical connection of the auxiliary contact block to the main device; ensure it is securely clipped on.
- Inspect wiring to the auxiliary contacts for continuity and proper connection.
- Үзгүлтүксүз иштөө:
- Check for loose screw clamp терминалдык байланыштар.
- Ensure the main contactor/relay is not experiencing chattering or inconsistent operation.
- Ашыкча ысып кетүү/түсүнүн өзгөрүшү:
- Immediately disconnect power. This could indicate an overload or a faulty connection.
- Verify that the current through the auxiliary contacts does not exceed the rated 10A.
If issues persist after performing these checks, contact Schneider Electric technical support or a qualified electrician.
6. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | LAD-8N20 |
| Байланыш конфигурациясы | 2 Адатта ачык (2NO) |
| Номиналдуу ток | 10 Amps |
| Rated Voltage (AC) | 690V AC чейин |
| Монтаж түрү | Clip-on Side Mount |
| Терминал түрү | Screw Clamp Терминалдар |
| Шайкештик | LC.D Contactors and CAD Control Relays (with AC coils) |
| Материал | Пластик |
| Сертификаттар | IEC, UL, CSA, CCC, EAC, GOST, RINA, BV, DNV, GL, LROS |
| Пакеттин өлчөмдөрү | 3.26 x 2.83 x 1.18 дюйм |
| Дата биринчи жеткиликтүү | 16-февраль, 2016-жыл |
7. Кепилдик жана колдоо
For specific warranty information, please refer to the documentation provided with your purchase or visit the official Schneider Electric website. Schneider Electric products are manufactured to high-quality standards and are backed by comprehensive customer support.
If you require technical assistance, have questions regarding installation, operation, or troubleshooting that are not covered in this manual, please contact Schneider Electric customer service or your local distributor. Ensure you have the product model number (LAD-8N20) available when seeking support.
Өндүрүүчү: Schneider Electric Telemecanique
