1. Киришүү
This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of the Inim BIC100 Passive Infrared (PIR) Ceiling Detector. Please read this manual thoroughly before attempting to install or operate the device to ensure proper functionality and safety.
2. Продукт бүтүп калдыview
The Inim BIC100 is a passive infrared ceiling detector designed for motion detection in various indoor environments. It offers 360-degree coverage, making it suitable for wide-area surveillance from a ceiling-mounted position.
1-сүрөт: The Inim BIC100 Passive Infrared Ceiling Detector. This image shows a white, circular device designed for discreet ceiling installation, featuring a central detection lens.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- 360-degree detection coverage.
- Effective detection diameter of 6 meters when installed at a height of 3.6 meters.
- Selectable alarm LEDs for visual indication.
- Adjustable alarm pulse duration.
- Automatic temperature compensation for stable performance across varying ambient temperatures.
3. Орнотуу
Proper installation is crucial for the optimal performance of the BIC100 detector. This device is designed for ceiling mounting.
3.1 Коопсуздук чаралары
- Ensure power is disconnected before beginning installation.
- Орнотуу жергиликтүү электр эрежелерине ылайык квалификациялуу кызматкерлер тарабынан аткарылышы керек.
- Avoid mounting the detector near heat sources, direct sunlight, or strong air currents (e.g., vents, fans) to prevent false alarms.
3.2 Монтаждалуучу жер
Select a central location on the ceiling that provides the desired 360-degree coverage. For optimal performance, the recommended mounting height is 3.6 meters to achieve a 6-meter detection diameter.
3.3 Монтаждоо кадамдары
- Детектордун корпусун этияттык менен ачыңыз.
- Детектордун негизин шаблон катары колдонуп, шыптагы бургулоо чекиттерин белгилеңиз.
- Тешиктерди бургула жана зарыл болсо, тиешелүү дубал анкерлерин салгыла.
- Route the necessary wiring through the designated opening in the detector base.
- Secure the detector base to the ceiling using screws.
- Connect the power and alarm wires to the appropriate terminals as indicated in the wiring diagram (refer to the product's internal diagram, not provided in this manual).
- Close the detector housing, ensuring it is securely fastened.
4. Орнотуу
After installation, configure the detector's settings to match your specific security requirements.
4.1 Alarm LED Configuration
The BIC100 features selectable alarm LEDs. These LEDs provide a visual indication when motion is detected. Consult the internal circuit board for jumpers or switches that control the activation or deactivation of these LEDs. Disabling the LEDs can make the detector more discreet.
4.2 Alarm Pulse Duration
The duration of the alarm pulse can be adjusted. This setting determines how long the alarm output remains active after motion detection. Refer to the detector's internal controls (e.g., potentiometers or dip switches) for adjusting this parameter. A longer pulse duration might be useful for certain alarm panel configurations.
4.3 Automatic Temperature Compensation
The BIC100 is equipped with automatic temperature compensation. This feature ensures consistent detection sensitivity across a range of ambient temperatures, reducing the likelihood of false alarms due to temperature fluctuations. This feature typically operates automatically and does not require manual adjustment.
5. Иштөө нускамалары
Once installed and configured, the Inim BIC100 operates automatically. When the security system is armed, the detector monitors its coverage area for infrared changes indicative of human movement.
- Аныктоо: Upon detecting motion, the PIR sensor triggers its internal relay.
- Ойготкуч Output: The triggered relay sends a signal to the connected alarm control panel, initiating an alarm sequence according to the panel's programming.
- LED Indication (if enabled): If the alarm LEDs are enabled, they will illuminate briefly to indicate detection.
The detector is designed for continuous operation when powered. No user interaction is required during normal operation.
6. Техникалык тейлөө
The Inim BIC100 detector requires minimal maintenance to ensure long-term reliability.
- Тазалоо: Periodically clean the detector's lens and housing with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Текшерүү: Annually inspect the detector for any signs of physical damage or loose wiring.
- Сыноо: Regularly test the detector's functionality in conjunction with your alarm system to confirm it is operating correctly. Refer to your alarm system's manual for testing procedures.
7. Кыйынчылыктарды
If you experience issues with your Inim BIC100 detector, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Детектор жооп бербей жатат | No power; incorrect wiring; faulty unit. | Check power supply and wiring connections. Consult a professional if the issue persists. |
| Жалган коңгуроо | Heat sources; direct sunlight; strong air currents; pets; incorrect sensitivity. | Relocate detector away from heat/air sources. Ensure pets are not in the detection zone. Adjust sensitivity if possible (refer to product documentation). |
| Аныктоо жок | Obstruction in detection zone; incorrect mounting height; faulty unit. | Clear obstructions. Verify mounting height and coverage area. Test the unit. |
| Светодиоддор күйбөйт | LEDs are disabled; faulty LEDs. | Check LED configuration settings (jumpers/switches). |
If troubleshooting steps do not resolve the issue, contact your installer or the manufacturer's technical support.
8. Техникалык шарттар
| Модел | BIC100 |
| Өндүрүүчү | Inim |
| Монтаж түрү | Шыпка монтаждоо |
| аныктоо технологиясы | Пассивдүү инфракызыл (PIR) |
| Камтуу бурч | 360 градус |
| Максималдуу диапазон | 6 meters diameter (at 3.6m height) |
| Өзгөчөлүктөрү | Selectable alarm LEDs, Adjustable alarm pulse duration, Automatic temperature compensation |
| Батареялар талап кылынат | Жок |
| ASIN | B01CNOYYFM |
| Биринчи жеткиликтүү күн | 21-февраль, 2020-жыл |
9. Кепилдик жана колдоо
Specific warranty information for the Inim BIC100 detector is typically provided at the point of purchase or by the manufacturer. Please retain your proof of purchase for warranty claims.
For technical support, service, or further inquiries, please contact your authorized Inim dealer or the manufacturer directly. Contact details can usually be found on the product packaging or the manufacturer's official webсайт.
10. Расмий продукт Videos
No official product videos from the seller were provided for this model.
