Cello Flipstyle Stainless Steel Vacuum Insulated Flask (34oz) User Manual

Introduction

Thank you for choosing the Cello Flipstyle Stainless Steel Vacuum Insulated Flask. This manual provides essential information for the safe and effective use, maintenance, and care of your new flask. Please read these instructions thoroughly before first use and retain them for future reference.

Продукт бүттүview

The Cello Flipstyle Flask is designed to keep your beverages hot or cold for extended periods, utilizing advanced Vacusteel Technology. Its durable, leak-proof construction makes it ideal for home, office, and travel use.

An overview of the Cello Flipstyle flask, showcasing its sleek stainless steel body, the flip-style lid mechanism, and a detached serving cup.

This image highlights the flask's leak-proof cap design and the wide mouth opening, which facilitates easy filling, pouring, and cleaning.

Illustrates the internal construction, emphasizing the use of food-grade stainless steel and the absence of BPA for safe beverage consumption.

Жайгашуу

1. Пакеттен чыгаруу: Carefully remove the flask and all components from the packaging. Inspect for any damage.
2. Алгачкы тазалоо: Before first use, wash the flask, lid, and any included cup thoroughly with warm water and mild dish soap. Rinse completely and allow to air dry.
3. Алдын ала ысытуу/Алдын ала муздатуу (кошумча): For optimal temperature retention, pre-heat the flask with hot water for 5-10 minutes before adding hot beverages, or pre-cool with cold water for 5-10 minutes before adding cold beverages. Empty the pre-heating/pre-cooling water before filling.

Иштөө нускамалары

1. Толтуруу: Unscrew the outer lid and then the inner flip-style lid. Pour your desired beverage into the flask. Do not overfill; leave approximately 1 inch (2.5 cm) of space from the top to allow for the lid and prevent spills.
2. Мөөрлөө: Securely screw the inner flip-style lid back onto the flask. Ensure it is tightened to prevent leaks. Then, screw the outer lid (which can also serve as a cup) firmly into place.
3. Куюу: To pour, unscrew the outer lid. The inner flip-style lid features a mechanism for controlled pouring. Depending on the specific design, you may press a button or flip a spout to open the pouring channel.
4. Ташуу: Always ensure both lids are securely fastened before transporting the flask to prevent accidental spills.

Техникалык тейлөө жана кам көрүү

• Тазалоо: Hand wash only. Wash the flask and lids with warm water and mild dish soap after each use. Use a bottle brush for thorough cleaning of the interior. Rinse thoroughly to remove all soap residue.
• Кургатуу: Allow all components to air dry completely before reassembling or storing to prevent odor and mildew. Store with the lid off to allow air circulation.
• Жок:
  • Do not use abrasive cleaners, scrubbers, or bleach, as these can damage the finish and insulation.
  • Do not place in a microwave oven, conventional oven, or freezer.
  • Do not immerse the entire flask in water for extended periods, as this may compromise the vacuum insulation.
  • Do not use for carbonated beverages, as pressure buildup can cause the lid to eject forcefully.

Проблемаларды чечүү

• Liquid not staying hot/cold:
  • Ensure the lid is securely tightened.
  • Verify that the pre-heating/pre-cooling steps were followed for optimal performance.
  • Check for any visible damage to the flask body or lid seals that might compromise the vacuum insulation.
• Leakage from the lid:
  • Confirm both the inner and outer lids are properly aligned and tightly screwed on.
  • Inspect the silicone gaskets or O-rings on the lid for proper placement, damage, or wear. Replace if necessary.
• Difficulty opening/closing the lid:
  • Ensure no food particles or residue are obstructing the threads. Clean thoroughly.
  • Avoid overtightening, which can make it difficult to open.

Техникалык шарттар

Provides a visual representation of the flask's dimensions, including its height (290mm) and base diameter (80mm), for reference.

Кесилиш view detailing the double-walled Vacu Steel insulation and the internal copper coating, which enhances heat retention for both hot and cold liquids.

Кепилдик жана колдоо

Cello products are manufactured with quality and durability in mind. For specific warranty information, please refer to the packaging or contact Cello customer support directly. Keep your purchase receipt as proof of purchase.

For assistance, questions, or to report any issues, please visit the official Cello website or contact their customer service department through the contact information provided with your product or on their webсайт.