1. Киришүү
This instruction manual provides essential information for the proper installation, operation, and maintenance of the GPI 119200-551 Replacement Motor. This motor is designed to extend the service life of GPI M-150S Series fuel transfer pumps. Please read this manual thoroughly before attempting any installation or service to ensure safe and efficient use.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Бул коопсуздук нускамаларын аткарбоо олуттуу жаракатка же материалдык зыянга алып келиши мүмкүн.
- Always disconnect power to the fuel transfer pump before installing or servicing the motor.
- Ensure the work area is well-ventilated and free from ignition sources when working with fuel systems.
- Тиешелүү жеке коргоочу шаймандарды (ЖКК), анын ичинде коопсуздук көз айнектерин жана кол каптарды кийиңиз.
- Refer to the original fuel transfer pump manual for additional safety guidelines specific to the pump assembly.
- This motor is designed for use with specific GPI M-150S Series fuel transfer pumps and should not be used for other applications.
3. Продукт бүтүп калдыview
The GPI 119200-551 is an OEM replacement motor specifically engineered for GPI M-150S Series fuel transfer pumps. It is designed to restore the performance and extend the operational life of your pump.
Сүрөт 1: GPI 119200-551 Replacement Motor. This image displays the cylindrical motor with a silver mounting plate, a central shaft, and red and black electrical wires extending from the side.
Негизги өзгөчөлүктөрү:
- Аткаруу: 1900 RPM, 1/5 Horsepower, 12V DC.
- Коопсуздук стандарттары: UL listed to US and Canadian Standards.
- Сапаты: Genuine GPI part, tested and approved for use with GPI fuel transfer pumps.
- Келип чыгышы: АКШда жасалган.
Шайкештик:
This replacement motor is compatible with the following GPI M-150S Series fuel transfer pump models:
- GPI M-150S-AU
- GPI M-150S-MU
- GPI M-150S-EM
- GPI M-150S-PO
- GPI M-150S-E-PO
4. Орнотуу жана орнотуу
Installation of the replacement motor requires careful attention to detail. It is recommended to consult the original pump's owner's manual for specific disassembly and reassembly instructions. The following steps provide a general overview:
- Кубатты өчүрүү: Ensure the fuel transfer pump is completely disconnected from its power source (e.g., vehicle battery, power supply).
- Күйүүчү май: If necessary, drain any remaining fuel from the pump and hoses to prevent spills.
- Кирүү мотору: Carefully disassemble the pump housing to gain access to the existing motor. Note the orientation and connection points of the old motor.
- Эски моторду алып салуу: Disconnect electrical wiring and mounting hardware from the old motor. Remove the old motor from the pump assembly.
- Жаңы мотор орнотуу: Position the new GPI 119200-551 replacement motor into the pump housing, ensuring proper alignment with the pump's internal components.
- Зымдарды туташтыруу: Connect the electrical wires (red and black) to the corresponding terminals. Ensure secure and correct polarity.
- Коопсуз мотор: Fasten the new motor using the appropriate mounting hardware. Ensure all connections are tight.
- Насосту кайра чогултуу: Reassemble the pump housing, ensuring all seals and gaskets are correctly seated to prevent leaks.
- Сыноо операциясы: Reconnect power to the pump and perform a functional test with a non-flammable liquid (e.g., water) to check for proper operation and leaks before introducing fuel.
For detailed visual guides or specific model instructions, refer to the official GPI webсайтка же кардарларды колдоо менен байланышыңыз.
5. Операция
Once the GPI 119200-551 replacement motor is correctly installed, the fuel transfer pump will operate according to its original specifications. Refer to your specific GPI M-150S Series fuel transfer pump's owner's manual for detailed operating procedures, including:
- Насосту толтуруу.
- Connecting hoses and nozzles.
- Activating and deactivating the pump.
- Safety precautions during fuel transfer.
The replacement motor ensures the pump delivers consistent performance for efficient fuel transfer.
6. Техникалык тейлөө
The GPI 119200-551 replacement motor is designed for durability and minimal maintenance. However, regular inspection of the overall pump system is crucial for longevity and safe operation.
- Мотор инспекциясы: Periodically check the motor for any signs of damage, excessive heat, or unusual noise during operation.
- Электр байланыштары: Бардык электр туташууларынын бекем жана дат баспагандыгын текшериңиз.
- Тазалык: Keep the motor and pump exterior clean and free from dirt, debris, and fuel residue.
- Pump System Maintenance: Follow the maintenance schedule outlined in your GPI M-150S Series fuel transfer pump's owner's manual for other components like hoses, nozzles, and filters.
Сүрөт 2: GPI Spare Parts and Accessories. This image shows a GPI fuel pump nozzle attached to a pump on a green tractor, with text indicating that GPI offers a full line of spare parts and accessories for pump repair and performance enhancement.
7. Кыйынчылыктарды
If your fuel transfer pump experiences issues after motor replacement, consider the following common troubleshooting steps. Always disconnect power before inspecting or servicing.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт. | No power supply; loose electrical connections; faulty switch. | Check power source and fuses. Verify all electrical connections are secure. Inspect the pump's power switch. |
| Motor runs but no fuel is dispensed. | Pump not primed; clogged inlet/outlet; air leak in suction line. | Ensure pump is properly primed. Check for obstructions in hoses or nozzle. Inspect suction line for leaks. |
| Агым ылдамдыгынын төмөндөшү. | Clogged filter; worn pump components (not motor related); low voltage. | Clean or replace fuel filter. Check battery voltage if 12V DC. Consult pump manual for internal component inspection. |
| Мотордон адаттан тыш үн. | Foreign object; motor bearing issue; improper installation. | Disconnect power and inspect for obstructions. If noise persists, contact GPI support. |
If troubleshooting steps do not resolve the issue, contact GPI customer support for further assistance.
8. Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Модель номери | 119200-551 |
| Бренд | GPI (Great Plains Industries) |
| Тtage | 12V DC |
| Ат күчү | 1 / 5 HP |
| RPM | 1900 RPM |
| Материал | Алюминий |
| Өлчөмдөрү (L x W x Y) | 12 x 6 x 7 дюйм |
| Элемент Салмагы | 6.43 фунт |
| Fit түрү | Universal Fit (for specified M-150S Series pumps) |
| Унаа кызматынын түрү | Truck, Tractor, Heavy Machinery |
| Газ түрүнүн шайкештиги | Бензин |
| Сертификаттар | UL АКШнын жана Канаданын стандарттарына киргизилген |
| UPC | 031401002768 |
9. Кепилдик маалыматы
GPI Genuine Parts & Accessories, including the 119200-551 Replacement Motor, are backed by a 90 күндүк чектелген өндүрүүчүнүн кепилдиги. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.
For specific warranty terms and conditions, or to make a warranty claim, please refer to the documentation included with your product or visit the official Great Plains Industries webсайт.
10. Колдоо жана байланыш
For technical assistance, troubleshooting guidance, or inquiries regarding replacement parts, please contact Great Plains Industries customer support.
- Продукт колдоо: Available by phone on weekdays.
- Owner's Manuals: All GPI owner's manuals are available for download on the official Great Plains Industries webсайт.
- Webсайт: www.gpipumps.com
When contacting support, please have your product model number (119200-551) and any relevant purchase information ready.
