Brandt Universal Refrigerator Handle Instruction Manual

1. Киришүү

This instruction manual provides essential information for the proper installation, use, and maintenance of your Brandt Universal Refrigerator Handle. Please read this manual thoroughly before installation and retain it for future reference. This handle is designed as a generic replacement part for various Brandt refrigerator models, ensuring compatibility and functionality.

2. Коопсуздук маалыматы

• Always disconnect power to the refrigerator before attempting any installation or repair.
• Травмалардын алдын алуу үчүн кол кап сыяктуу тиешелүү жеке коргоочу шаймандарды кийиңиз.
• Эгер кандайдыр бир кадамга ишенбесеңиз, квалификациялуу техникке кайрылыңыз.
• Тумчугуп калуу коркунучун болтурбоо үчүн кичинекей бөлүктөрүн балдардан алыс кармаңыз.

3. Пакеттин мазмуну

Таңгакты ачканда бардык компоненттердин бар экенин жана бузулбаганын текшериңиз.

• 1 x Brandt Universal Refrigerator Handle (Metallic Silver)
• Note: Mounting screws or hardware may not be included and might need to be reused from the original handle or purchased separately.

Сүрөт 1: The Brandt Universal Refrigerator Handle. This image displays the metallic silver handle with its oblong shape and white end caps, ready for installation.

4. Орнотуу боюнча нускамалар

Follow these steps carefully to install the refrigerator handle. The process may vary slightly depending on your specific refrigerator model.

1. аймакты даярдоо: Ensure the refrigerator door is clean and free of debris where the handle will be mounted.
2. Эски тутканы алып салуу (эгер бар болсо): If replacing an existing handle, locate the mounting screws. These are typically found on the inside edge of the door or under decorative caps on the handle itself. Use an appropriate screwdriver to remove them. Carefully detach the old handle.
3. Align the New Handle: Position the new Brandt Universal Refrigerator Handle over the existing mounting holes on the refrigerator door. Ensure the center-to-center spacing of 200mm aligns correctly with your door's mounting points.
4. Колду бекитүү: Insert the mounting screws (reusing old ones if compatible, or using new ones of the correct size) through the handle's mounting points and into the door. Tighten the screws firmly but do not overtighten, as this can strip the threads or damage the handle/door.
5. Орнотууну текшерүү: Gently pull on the newly installed handle to ensure it is securely attached and does not wobble.

For models where the mounting points are not visible, refer to your refrigerator's specific service manual for handle removal and installation procedures.

5. Operating the Handle

The Brandt Universal Refrigerator Handle is designed for simple and reliable operation. To open the refrigerator door, grasp the handle firmly and pull gently. Avoid excessive force or sudden jerking motions, as this can stress the mounting points and potentially damage the handle or door.

6. Техникалык тейлөө

To ensure the longevity and appearance of your refrigerator handle, follow these maintenance guidelines:

• Тазалоо: Wipe the handle regularly with a soft cloth dampened with mild soap and water. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can scratch or damage the metallic finish.
• Текшерүү: Periodically check the handle for any signs of looseness. If the handle feels loose, gently tighten the mounting screws. Do not overtighten.
• Таасирден качуу: Protect the handle from impacts or heavy objects that could cause dents or structural damage.

7. Кыйынчылыктарды

Handle is loose:

Мүмкүн болгон себеп: Mounting screws have loosened over time.

Чечим: Locate the mounting screws (usually on the inside of the door or under caps) and carefully tighten them with an appropriate screwdriver. Do not overtighten.

Handle is difficult to install:

Мүмкүн болгон себеп: Incorrect alignment or incompatible mounting holes.

Чечим: Double-check the center-to-center spacing (200mm) of the handle against your refrigerator door's mounting points. Ensure the handle is oriented correctly. If the holes do not align, this handle may not be compatible with your specific refrigerator model, or additional adapters might be required (not included).

8. Техникалык шарттар

9. Кепилдик жана колдоо

Information regarding specific warranty terms for this Brandt Universal Refrigerator Handle (Model 480132101115) is not available in the provided product details. For warranty inquiries or technical support, please contact the retailer or Brandt customer service directly. Spare parts availability information is also not provided.