1. Киришүү
This manual provides essential information for the proper installation, operation, and maintenance of your DB DRIVE K5 12D4V2 Okur(R) K5v2 Series 12-inch Subwoofer. Please read this manual thoroughly before attempting to install or operate the subwoofer to ensure optimal performance and safety.
The DB DRIVE K5 12D4V2 is a high-performance 12-inch subwoofer designed for car audio systems, featuring robust construction and advanced components for powerful and clear bass reproduction.
2. Негизги өзгөчөлүктөрү
- 12-inch subwoofer for deep bass response.
- 1,500W maximum power handling.
- 2.5-inch voice coil with 4-layer 4-ohm DVC (Dual Voice Coil) configuration.
- Heavy-gauge stamped steel basket for durability.
- Injection-molded bowl PP (Polypropylene) dust cap.
- High-temperature voice coil for extended performance.
- KSV voice-coil former.
- High-excursion butyl rubber surround for enhanced cone movement.
- Heavy-gauge spring terminals for secure wire connections.
- Proprietary PVC gasket for a sealed fit.
3. Коопсуздук маалыматы
Ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Кесиптик орнотуу сунушталат: Installation of car audio components can be complex. If you are unsure about any step, seek assistance from a qualified professional installer.
- Батареяны ажыратыңыз: Орнотууну баштоодон мурун, электр шорт-тыгыз туташууларынын жана бузулуулардын алдын алуу үчүн унаанын терс аккумулятор терминалын сууруп салыңыз.
- Туура зымдар: Ensure all wiring is correctly connected according to the amplifier and subwoofer specifications. Incorrect wiring can lead to damage or fire.
- Вентиляция: Сабвуфердин айланасында жетиштүү желдетүүнү камсыз кылыңыз жана ampысып кетүүнүн алдын алуу үчүн көтөргүч.
- Үн деңгээли: Prolonged exposure to high volume levels can cause hearing damage. Use caution when adjusting volume.
- Коопсуз орнотуу: Securely mount the subwoofer to prevent it from becoming a projectile in the event of a sudden stop or accident.
4. Орнотуу жана орнотуу
Proper installation is crucial for optimal performance and longevity of your subwoofer. This section provides general guidelines. Refer to your amplifier's manual for specific wiring diagrams and power requirements.
4.1. Choosing an Enclosure
The DB DRIVE K5 12D4V2 subwoofer requires a suitable enclosure for proper operation. Common enclosure types include sealed, ported (vented), or bandpass. The choice depends on desired sound characteristics and available space. Consult a car audio specialist or online resources for recommended enclosure volumes and tuning frequencies for this specific model.
4.2. Сабвуферди туташтыруу
The K5 12D4V2 features a 4-layer 4-ohm DVC (Dual Voice Coil) configuration. This allows for various wiring options to achieve different impedance loads at the amplifier. Common configurations include:
- Parallel Wiring (2 ohms): Connect the positive terminals of both voice coils together and the negative terminals of both voice coils together. This results in a 2-ohm load, suitable for ampкөтөргүчтөр 2 Омдо туруктуу.
- Series Wiring (8 ohms): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. The remaining positive and negative terminals are then connected to the amplifier. This results in an 8-ohm load.
Always match the subwoofer's impedance load to the amplifier's stable impedance rating. Refer to the wiring diagram provided with your ampөмүрлүү.
4.3. Туташуу Ampөмүрлүү
Connect the wired subwoofer to the appropriate speaker output terminals on your amplifier. Ensure polarity is correct (+ to + and - to -). Use high-quality speaker wire of adequate gauge to minimize power loss.

Figure 1: DB DRIVE K5 12D4V2 Subwoofer. This image displays the top view of the subwoofer, highlighting its black cone with a red trim, the durable black frame, and the heavy-gauge spring terminals for electrical connections. The red magnet cover is visible at the bottom.
5. Иштөө нускамалары
Once installed, follow these general guidelines for operating your subwoofer:
- Баштапкы кубаттоо: After installation, turn on your car's audio system at a low volume. Gradually increase the volume and check for proper operation.
- Ampкөтөргүч Орнотуулар: Adjust the gain, crossover frequency, and phase settings on your amplifier to blend the subwoofer's output seamlessly with your main speakers.
- Пайда: Күчөтүүнү чыгаруу көлөмүнө дал келтирүү үчүн коюңузtage of your head unit. Avoid setting it too high, which can cause distortion.
- Төмөн өткөрүүчү чыпка (LPF): Set the LPF to filter out frequencies above the subwoofer's intended range (typically 60Hz-100Hz).
- Фаза: Adjust the phase (0° or 180°) to ensure the subwoofer's output is in sync with your main speakers, preventing cancellation or weak bass.
- Тыныгуу мезгили: Allow a break-in period of approximately 20-30 hours of normal listening before pushing the subwoofer to its limits. This allows the suspension components to loosen up and perform optimally.
- Ашыкча айдап кетүүдөн качыңыз: Do not continuously play the subwoofer at distorted levels. This can cause permanent damage to the voice coil and other components.
6. Техникалык тейлөө
The DB DRIVE K5 12D4V2 subwoofer requires minimal maintenance:
- Тазалоо: Use a soft, dry cloth to wipe down the cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Текшерүү: Periodically inspect the wiring connections to ensure they are secure and free from corrosion. Check the subwoofer's surround for any signs of cracking or damage.
- Экологиялык факторлор: Protect the subwoofer from extreme temperatures, direct sunlight, and moisture, which can degrade its performance and lifespan.
7. Кыйынчылыктарды
Сабвуфериңизде көйгөйлөр пайда болсо, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Сабвуферден үн жок |
|
|
| Бурмаланган же түшүнүксүз бас |
|
|
| Сабвуфердин ысып кетиши |
|
|
If the problem persists after attempting these solutions, contact DB DRIVE customer support or a qualified car audio technician.
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | DB DRIVE |
| Модель номери | SB-58148 |
| Динамик өлчөмү | 12 дюйм |
| Max Power Handling | 1,500 Вт |
| Үн катушкасы | 2.5" 4-layer 4-ohm DVC |
| Себет материалы | Heavy-gauge stamped болот |
| Чаң капкагы | Injection-molded bowl PP |
| Курчап турган материал | High-excursion butyl rubber |
| Терминалдар | Heavy-gauge spring terminal |
| UPC | 731215374418, 782386080233 |
| Монтаж түрү | Flush тоосу |
| Дата биринчи жеткиликтүү | 30-март, 2016-жыл |
9. Кепилдик жана колдоо
For information regarding warranty coverage, technical support, or service, please refer to the official DB DRIVE webсайтка же түздөн-түз кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
DB DRIVE Official Webсайт: www.dbdrive.net (Эскертүү: Бул толтургуч URL, сураныч, чыныгы расмий адамды текшериңиз website for DB DRIVE.)





