Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Snom D710 SIP Phone. The Snom D710 is a business phone designed for high-definition audio performance and affordability, featuring an elegant design and essential communication functionalities.
Key features include a four-line backlit B/W display, context-sensitive function keys, programmable function keys with LEDs, wideband HD audio, and support for multiple SIP accounts.
Пакеттин мазмуну
Before proceeding with the setup, please ensure all components are present in your package:
- Snom D710 SIP Phone Unit
- Handset with Cord (4P4C)
- Dual-angle Footstand (for 46° and 28° angles)
- Ethernet кабели
- Quick Start Guide
- Optional: 5V DC adapter (part number 3903) - if not using Power over Ethernet (PoE)
- Optional: Snom EHS adapter (part number 2362) - for EHS capable headsets
Figure 1: Snom D710 SIP Phone. This image shows the complete phone unit, including the main body, handset, and the attached footstand, providing a full view буюмдун.
Жайгашуу
1. Attaching the Footstand
- Locate the dual-angle footstand.
- Align the tabs on the footstand with the slots on the back of the phone unit.
- Gently push until the footstand clicks into place. You can choose between a 46° or 28° angle by adjusting the attachment point.
2. Телефонду туташтыруу
- Connect one end of the coiled handset cord to the port labeled "Handset" (4P4C) on the side of the phone.
- Connect the other end of the coiled cord to the port on the bottom of the handset.
Figure 2: Handset Connection. This image provides a close-up view of the handset port on the phone's body, illustrating where the coiled cord should be connected.
3. Network and Power Connection
The Snom D710 supports Power over Ethernet (PoE) or an optional 5V DC adapter.
- Connect one end of the Ethernet cable to the "LAN" port (RJ45) on the back of the phone.
- Connect the other end of the Ethernet cable to your network switch or router. If your network supports PoE (802.3af Class 1), the phone will power on automatically.
- If PoE is not available, connect the optional 5V DC adapter (part number 3903) to the power port on the back of the phone and plug it into a power outlet.
- The phone will begin its boot sequence. The display will show the Snom logo and then proceed to load the firmware and configuration.
Телефонду иштетүү
Дисплей жана навигация
Figure 3: Display and Navigation. This image highlights the phone's four-line backlit display and the central navigation cluster, including the checkmark, arrow keys, and 'X' button.
The Snom D710 features a four-line backlit B/W display for clear information display. Navigation is primarily done using the central navigation cluster:
- Өйдө/Төмөн/Солго/Оңго жебелер: Navigate through menus and lists.
- Checkmark (✓) Button: Тандоолорду ырастаңыз же кошумча менюларга кириңиз.
- X баскычы: Cancel an action, go back to the previous menu, or delete input.
Function Keys
The phone is equipped with context-sensitive function keys located directly below the display, and five freely programmable function keys with LEDs on the right side of the keypad.
Figure 4: Keypad and Programmable Keys. This image provides a detailed view of the numeric keypad and the five programmable function keys with LED indicators on the right side of the phone.
- Context-Sensitive Keys: Their function changes depending on the current screen or call state. The current function is displayed on the screen directly above the key.
- Programmable Keys (with LEDs): These keys can be configured for various functions such as speed dial, busy lamp field (BLF), line appearance, or other custom features. The LEDs indicate the status of the assigned function (e.g., line in use, contact busy).
Негизги чалуу функциялары
- Чакыруу:
- Трубканы көтөрүңүз же динамик баскычын басыңыз.
- Ариптакта аркылуу каалаган номерди териңиз.
- Press the "Dial" context-sensitive key or wait for the call to connect.
- Чалууга жооп берүү:
- Телефон шыңгырганда, телефонду алыңыз же Динамик баскычын басыңыз.
- Alternatively, press the "Answer" context-sensitive key.
- Чалууну аяктоо: Hang up the handset or press the "End Call" context-sensitive key.
- Кармап туруу: During a call, press the "Hold" button. Press it again to resume the call.
- Үнсүз: Press the "Mute" button to mute your microphone during a call. Press it again to unmute.
- Көлөмү: Use the Volume buttons below the keypad to adjust the handset, headset, or speakerphone volume during a call, or the ringer volume when idle.
- Динамик: Press the "Speaker" button to toggle speakerphone mode on or off.
- Гарнитура: If a headset is connected, press the "Headset" button to switch audio to the headset.
Advanced Features
- Чалуучунун ID: Displays the incoming caller's information on the screen.
- 3 тараптуу конференция: Initiate a three-party conference call. Consult your VoIP service provider's instructions for specific steps.
- Music on Hold: When a call is placed on hold, music may be played to the caller, depending on your system configuration.
- Multicast пейджинг: Allows broadcasting audio to multiple phones simultaneously.
- XML Minibrowser: Supports custom applications and services via XML.
Техникалык тейлөө
To ensure the longevity and optimal performance of your Snom D710 SIP Phone, follow these maintenance guidelines:
- Тазалоо: Телефондун бетин жана дисплейин тазалоо үчүн жумшак, кургак, мамыксыз чүпүрөктү колдонуңуз. Өжөр тактар үчүн бир аз сүртүңүзampЧүпүрөктү суу менен сүртүңүз. Абразивдүү тазалоочу каражаттарды, эриткичтерди же аэрозоль чачыраткычтарын колдонуудан алыс болуңуз, анткени алар телефондун сырткы көрүнүшүнө жана ички компоненттерине зыян келтириши мүмкүн.
- Курчап турган чөйрө: Телефонду кургак жерде, күндүн түз тийген нурунан, ашыкча ысыктан жана нымдуулуктан алыс кармаңыз. Телефонду суюктуктарга тийгизбеңиз.
- Колдонуу: Телефонду жана анын бөлүктөрүн этияттык менен кармаңыз. Телефонду түшүрүп албоодон же катуу соккуга кабылбоодон алыс болуңуз.
- Кабелдер: Ensure all cables (handset cord, Ethernet cable, power adapter cable) are not kinked, pinched, or under strain.
Проблемаларды чечүү
This section addresses common issues you might encounter with your Snom D710 SIP Phone.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Телефон күйбөйт. | PoE же кубат адаптеринен кубат жок. |
|
| Терүү үнү жок. | Network connectivity issue or SIP registration failure. |
|
| Үн сапатынын начардыгы (жаңылык, статикалык). | Тармактын тыгыны, ката кабели же айлана-чөйрөнүн кийлигишүүсү. |
|
| Дисплей бош же тоңуп калган. | Программанын катасы же кубат маселеси. |
|
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | Snom D710 (Part Number: 00004235) |
| Дисплей | Four-line backlit B/W display |
| SIP эсептери | 4 |
| Аудио сапаты | Wideband HD audio, Digital Signal Processor (DSP) enhanced |
| Ethernet которулуу | 2-port 10/100 Mbps (RJ45) |
| Power Source | PoE 802.3af Class 1 or optional 5V DC adapter (part number 3903) |
| Телефон порту | 4P4C |
| Гарнитура порт | 4P4C, EHS capable with Snom EHS adapter (part number 2362) |
| Өлчөмдөрү (L x W x Y) | 8 x 10 x 4 дюйм |
| Элемент Салмагы | 2 фунт |
| Материал | Пластик |
| Түс | Кара |
| Колдоого алынган протоколдор | SIP RFC3261 |
| Өзгөчөлүктөр | Speakerphone, XML minibrowser, Music on Hold, Multicast Paging |
Кепилдик жана колдоо
The Snom D710 SIP Phone comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Snom webсайт.
For technical support, configuration assistance, or troubleshooting beyond the scope of this manual, please contact your VoIP service provider or Snom customer support. You may also find additional resources and FAQs on the Snom support portal.
Юридикалык эскертүү: Бул продукт Калифорния штатына рак жана тубаса кемтиктерди же башка репродуктивдик зыян келтирерин белгилүү болгон химиялык заттарды камтыйт.
