1. Киришүү
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Huawei ETS1162 3G GSM Voice Box Link. This device converts a mobile SIM card signal into a fixed-line telephone connection, allowing you to use standard analog telephones or telecare systems with a GSM network.

Сүрөт 1: Алдыңкы view of the Huawei ETS1162 device. This image shows the top surface of the black, square-shaped device with the Huawei logo centrally placed and a single, upright antenna.
2. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- Huawei ETS1162 3G GSM Voice Box Link unit
- Кубаттуу адаптер
- Антенна
- Колдонуучунун Колдонмосу (бул документ)
- Note: Telephone connection cables may not be included and might need to be sourced separately.
3. Орнотуу нускамалары
Follow these steps to set up your Huawei ETS1162 device.
3.1. SIM картаны салуу
- Түзмөктүн өчүрүлгөнүн жана кубат булагынан ажыратылганын текшериңиз.
- SIM картанын уячасын табыңыз, адатта аппараттын капталынан же астынан.
- Insert your 3G GSM SIM card into the slot. Ensure the SIM card's PIN code has been disabled prior to insertion. This can usually be done by inserting the SIM card into a mobile phone and disabling the PIN request through the phone's security settings.
- SIM картаны ордунан чыккыча акырын түртүңүз.
3.2. Антеннаны туташтыруу
Screw the provided antenna into the designated antenna port on the rear of the device. Ensure it is securely fastened for optimal signal reception.
3.3. Connecting Telephones/Devices

Figure 2: Rear ports of the Huawei ETS1162. This image displays the back panel of the device, highlighting the power input, two RJ11 telephone ports (labeled C1 and C2), a USB port (labeled NO DATA), and the antenna connection point.
The Huawei ETS1162 typically features two RJ11 ports (often labeled C1 and C2) for connecting analog telephones or telecare systems.
- Connect your analog telephone(s) or telecare system(s) to the RJ11 ports on the rear of the ETS1162 using standard telephone cables.
- You can connect one or two devices as needed. For example, one port can be used for a telephone and the other for a telecare system.
3.4. Аппаратты күйгүзүү
- Connect the power adapter to the power input port on the rear of the ETS1162.
- Кубат адаптерин розеткага сайыңыз.
- Press the power button (if available) or the device will power on automatically.
- Observe the indicator lights on the device. A stable signal light indicates successful network connection.
4. Иштөө нускамалары
Once the device is set up and connected to the GSM network, you can use your connected analog telephone as you would a standard landline.
4.1. Чалууларды жасоо
- Pick up the handset of your connected telephone.
- You should hear a dial tone.
- Каалаган телефон номерин териңиз.
- The call will be routed through the GSM network using your inserted SIM card.
4.2. Чалууларды кабыл алуу
- When a call comes in, your connected telephone will ring.
- Чалууга жооп берүү үчүн телефонду алыңыз.
4.3. Индикатор жарыктары
Refer to the device's indicator lights for status information:
- Күч көрсөткүчү: Түзмөктүн күйүп турганын көрсөтөт.
- Сигнал көрсөткүчү: Shows the strength of the GSM network signal. A solid light typically means a good signal. A blinking light or no light may indicate a weak signal or no network connection.
- Статус көрсөткүчү: May indicate call activity or other operational states. Consult the specific device labeling for details.
5. Техникалык тейлөө
To ensure the longevity and optimal performance of your Huawei ETS1162, follow these maintenance guidelines:
- Тазалоо: Аппараттын сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалагычтарды же абразивдүү материалдарды колдонбоңуз.
- Жайгашкан жери: Place the device in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure it is placed in an area with good GSM signal reception.
- Антенна: Do not bend or forcefully remove the antenna. Ensure it is positioned vertically for best signal.
- Электр камсыздоо: Түзмөк менен кошо берилген оригиналдуу кубат адаптерин гана колдонуңуз.
- Программалык камсыздоо жаңыртуулары: While this device typically does not require frequent user-initiated software updates, ensure it is connected to a stable power source if any updates are prompted by your service provider.
6. Кыйынчылыктарды
If you encounter issues with your Huawei ETS1162, refer to the following troubleshooting tips:
6.1. No Dial Tone or Cannot Make Calls
- SIM картаны текшерүү: Ensure the SIM card is correctly inserted and its PIN code has been disabled.
- Сигнал күчү: Check the signal indicator light. If it's off or blinking, the device may not have a strong enough GSM signal. Try repositioning the device or antenna.
- Күч: Verify the device is powered on and the power adapter is securely connected.
- Telephone Connection: Ensure your analog telephone is correctly plugged into one of the RJ11 ports.
- SIM Card Validity: Confirm your SIM card is active and has sufficient credit or an active plan.
6.2. Intermittent Signal or "Red Light" Issue
Some users have reported intermittent signal loss or a "red light" indicator, particularly with certain network providers.
- Түзмөктү кайра иштетүү: If you experience a persistent red light or loss of signal, try disconnecting the power, waiting 10-15 seconds, and then reconnecting the power. This can often resolve temporary network issues.
- Антеннанын абалы: Adjust the antenna's position to optimize signal reception.
- Жайгашкан жери: Move the device to a location with better cellular coverage.
- Тармак камсыздоочу: If issues persist, contact your mobile network provider to inquire about network coverage in your area or potential SIM card issues.
6.3. No Incoming Calls
- SIM карта: Ensure the SIM card is active and can receive calls on a mobile phone.
- Түзмөктүн абалы: Check the device's indicator lights to confirm it is powered on and has a stable network connection.
- Чалууларды багыттоо: Verify that no call forwarding is active on your SIM card that would redirect incoming calls away from the device.
7. Техникалык шарттар
| Бренд | HUAWEI |
| Модел | ETS1162 |
| Модем түрү | Cellular Modem (3G GSM) |
| Байланыш технологиясы | GSM, Ethernet, USB |
| Number of Phone Ports | 2 (RJ11) |
| Шайкеш түзмөктөр | Analog Telephones, Telecare Systems |
| Түс | Кара |
| Батареялар талап кылынат | Жок |
8. Кепилдик жана колдоо
As a refurbished product, this Huawei ETS1162 device is typically covered by the Amazon Renewed Guarantee. This guarantee ensures that if you are not satisfied with your purchase, renewed products are eligible for replacement or refund.
- For specific warranty details and to initiate a claim, please refer to the Amazon Renewed program terms and conditions or contact Amazon customer service directly.
- For technical support related to the device's functionality, please contact the seller or Huawei customer support.
9. Коопсуздук маалыматы
- Аппаратты экстремалдык температурага, нымдуулукка же түз күн нуруна калтырбаңыз.
- Аппаратты суудан жана башка суюктуктардан алыс кармаңыз.
- Аппаратты өзүңүз ачууга же оңдоого аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
- Аппаратты жана анын тетиктерин жергиликтүү эрежелерге ылайык таштаңыз.





