CJ Tech 605 2-Outlet Indoor 7-Day Digital Timer User Manual

1. Киришүү

This manual provides comprehensive instructions for the safe and efficient operation of your CJ Tech 605 2-Outlet Indoor 7-Day Digital Timer. Please read this manual thoroughly before using the device and retain it for future reference.

The CJ Tech 605 is designed to automate the on/off cycles of indoor electrical devices, offering convenience and energy savings through its programmable 7-day digital timer and two grounded outlets.

2. Маанилүү коопсуздук нускамалары

• Имараттын ичинде гана колдонуу үчүн. Нымдуулукка же өтө жогорку температурага дуушар кылбаңыз.
• Do not exceed the electrical ratings of the timer. Refer to the specifications section for details.
• Таймердин жерге туташтырылган розеткага бекем сайылганын текшериңиз.
• Do not use with appliances that could cause a hazardous condition if left unattended, such as heating appliances.
• Do not disassemble or attempt to repair the timer. Contact qualified service personnel for assistance.
• Балдар жетпеген жерде сактаңыз.

3. Пакеттин мазмуну

• 1 x CJ Tech 605 2-Outlet Indoor 7-Day Digital Timer
• 1 х Колдонуучунун колдонмосу (бул документ)

4. Продукциянын өзгөчөлүктөрү

The CJ Tech 605 timer offers the following key features:

• 2 жерге туташтырылган розеткалар: Control two devices simultaneously.
• 7 күндүк санариптик программалоо: Set custom on/off schedules for each day of the week.
• Программалануучу: Create multiple on/off programs.
• Astronomical Features: Automatically adjusts to sunrise/sunset times (specific implementation details may vary, refer to programming section).
• Кол менен жокко чыгаруу: Temporarily switch devices on or off without affecting programmed settings.
• Built-in Battery Backup: Кубаттоо учурунда орнотууларды сактайтtages.

1-сүрөт: The CJ Tech 605 2-Outlet Indoor 7-Day Digital Timer shown in its retail packaging. The timer is white with a digital display and four control buttons: ON/OFF, SET, -/RDM, and +/AUTO. The packaging highlights its features: 2 outlets, 7-day digital timer, programmable, and astronomical features.

5. Орнотуу жана орнотуу

1. Таңылганын ачуу: Таймерди анын таңгагынан этияттык менен алып салыңыз.
2. Баштапкы төлөм: Plug the timer into a standard 120V AC grounded wall outlet for at least 30 minutes to charge the internal battery backup. The display should illuminate.
3. Учурдагы убакытты коюу: Before programming, set the current time and day. Refer to the "Operating Instructions" section for details on using the SET and +/- buttons.
4. Түзмөктөрдү туташтыруу: Plug the appliances you wish to control into the two grounded outlets on the timer. Ensure the appliances' power switches are in the "ON" position if you want the timer to control their power.

6. Иштөө нускамалары

The timer features a digital display and four control buttons:

• КҮЙГҮЗҮҮ/ӨЧҮРҮҮ: Manually turns the connected devices on or off, overriding current program settings temporarily.
• ЖӨНДӨӨ: Used to enter programming mode for setting time, day, and on/off schedules.
• -/RDM: Decreases values during setting. Also activates/deactivates Random mode (RDM) for security lighting.
• +/AUTO: Increases values during setting. Also switches between Manual ON, Manual OFF, and AUTO modes.

6.1. Учурдагы убакытты жана күндү коюу

1. басып, кармап туруңуз SET баскычы дисплей жарк этмейинче.
2. колдонуу +/AUTO or -/RDM buttons to adjust the current hour. Press SET ырастоо үчүн.
3. Repeat for minutes and then for the current day of the week.
4. Басыңыз SET again to exit time setting mode.

6.2. Кол менен өзгөртүү

басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button to cycle through ON, OFF, and AUTO modes. In AUTO mode, the timer follows its programmed schedule. In ON or OFF mode, the timer will remain in that state until manually changed or the next programmed event occurs (depending on model specifics).

7. Programming the Timer

The CJ Tech 605 allows for multiple ON/OFF programs over a 7-day cycle. The exact number of programs may vary. Follow these general steps:

1. басыңыз SET button repeatedly until "PROG" or "PROGRAM" appears on the display, along with a program number (e.g., "1 ON").
2. колдонуу +/AUTO or -/RDM buttons to select the desired day(s) for this program (e.g., MON-FRI, SAT-SUN, or individual days). Press SET ырастоо үчүн.
3. Set the desired ON time using the +/AUTO or -/RDM buttons for hours and minutes. Press SET ырастоо үчүн.
4. The display will then show "1 OFF". Set the desired OFF time for the same program using the +/AUTO or -/RDM баскычтар. Басыңыз SET ырастоо үчүн.
5. Repeat steps 2-4 for additional programs (e.g., "2 ON", "2 OFF", etc.).
6. Once all programs are set, press the КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button to return to normal operating mode. Ensure the timer is in "AUTO" mode for programs to execute.

7.1. Astronomical Feature (Dusk/Dawn)

If your model supports astronomical features, it will automatically adjust ON/OFF times based on local sunrise and sunset. This feature is typically enabled or configured within the programming mode. Consult the display for specific indicators (e.g., "DUSK", "DAWN") when setting programs. You may need to set your geographical region or zip code for accurate operation, though this model's interface suggests a simpler implementation.

8. Техникалык тейлөө

• Тазалоо: Тазалоодон мурун таймерди розеткадан ажыратыңыз. Сыртын жумшак, кургак чүпүрөк менен сүртүңүз. Суюк тазалагычтарды же абразивдүү материалдарды колдонбоңуз.
• Сактагыч: If storing the timer for an extended period, ensure the internal battery is charged periodically to maintain its life. Store in a cool, dry place.

9. Кыйынчылыктарды

10. Техникалык шарттар

• Модел: CJ Tech 605
• Киргизүү көлөмүtage: 120V AC, 60Гц
• Максималдуу жүк: (Typically 15A/1800W Resistive, 10A/1200W Tungsten - Refer to product label for precise ratings)
• Соода түйүндөрү: 2 Негизделген розетка
• Программалоо: 7-Day Digital
• Ички батарея: NiMH (for backup)
• Пакеттин өлчөмдөрү: 6.7 x 5 x 2 дюйм
• Элемент Салмагы: 4.8 унция
• ASIN: B01GVNSW90
• Item Model Number (Manufacturer SKU): 4330939843

Note: Electrical ratings are typical for this type of device. Always refer to the product label for precise specifications.

11. Кепилдик жана колдоо

CJ Tech products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official CJ Tech website. Please have your model number (605) and purchase information ready when contacting support.