Колдонмолор+

3M BT-30

3M BT-30 Hose User Manual

Модели: BT-30

1. Продукт бүтүп калдыview

The 3M BT-30 hose is a component designed for use with compatible vacuum and dust collection systems. Constructed from durable polyurethane (PU) material, this hose provides flexibility and resilience for various applications. It is identified by its model number BT-30 and is manufactured by 3M.

3M BT-30 Hose with blue connector

Сүрөт 1.1: The 3M BT-30 hose, featuring its corrugated black polyurethane body and a blue connector at one end. This image illustrates the typical appearance and connection point of the hose.

2. Орнотуу нускамалары

Follow these steps to properly set up your 3M BT-30 hose:

  1. Inspect the Hose: Before initial use, carefully inspect the entire length of the hose for any signs of damage, kinks, or obstructions. Ensure the connectors are clean and free of debris.
  2. Жабдууга туташуу: Attach one end of the BT-30 hose to the designated port on your vacuum or dust collector. Ensure a secure and airtight connection. The blue connector is designed for a specific interface; align it correctly and twist or push until fully seated.
  3. Connect to Tool/Accessory: Attach the other end of the hose to your power tool's dust extraction port or the appropriate accessory. Verify that this connection is also secure to prevent air leaks and maintain optimal performance.
  4. Шлангдын маршруту: Position the hose to avoid sharp bends, kinks, or obstructions that could impede airflow or damage the hose. Ensure it does not pose a tripping hazard.

3. Иштетүү боюнча нускамалар

To ensure effective and safe operation of the 3M BT-30 hose:

  • Аба агымын сактоо: Ensure the hose remains free of blockages during operation. Reduced airflow can lead to decreased performance of your dust collection system and potential overheating of connected equipment.
  • Avoid Kinking: Do not allow the hose to kink or become sharply bent, as this can restrict airflow and cause premature wear or damage to the polyurethane material.
  • Температура диапазону: Operate the hose within typical environmental temperatures. Extreme heat or cold can affect the material's flexibility and durability.
  • Химиялык таасири: Avoid exposing the hose to harsh chemicals or solvents that are not compatible with polyurethane, as this can degrade the material.

4. Техникалык тейлөө

Regular maintenance helps prolong the life and performance of your 3M BT-30 hose:

  • Тазалоо:
    • Periodically clean the exterior of the hose with a damp cloth and mild soap solution. Rinse thoroughly and allow to air dry completely before storage.
    • To clear internal blockages, disconnect the hose from all equipment and gently tap or flex it. For stubborn blockages, use a soft brush or compressed air, ensuring proper eye protection.
  • Сактагыч: Store the hose in a clean, dry environment, away from direct sunlight and extreme temperatures. Avoid storing it in a tightly coiled or kinked position to prevent permanent deformation.
  • Текшерүү: Regularly inspect the hose for cuts, abrasions, punctures, or signs of wear, especially near the connectors. Replace the hose if significant damage is observed to maintain system integrity and safety.

5. Кыйынчылыктарды

This section addresses common issues you might encounter with your 3M BT-30 hose.

КөйгөйМүмкүн себепЧечим
Reduced Suction/Airflow
  • Шлангдын бөгөлүшү
  • Кыйылган шланг
  • Бошоң байланыш
  • Inspect and clear any obstructions within the hose.
  • Straighten the hose to remove kinks.
  • Ensure all connections to equipment and tools are secure.
Hose Damage (Cuts, Punctures)
  • курч нерселер менен байланыш
  • Ашыкча абразия
  • Туура эмес сактоо
  • Avoid dragging the hose over rough surfaces or sharp edges.
  • Store the hose properly to prevent damage.
  • Replace the hose if damage compromises its function or safety.
Difficulty Connecting
  • Туура эмес тегиздөө
  • Туташтыргычтагы сыныктар
  • Incompatible port
  • Ensure the connector is aligned correctly with the port.
  • Clean any debris from the connector and port.
  • Verify compatibility with your equipment's specifications.

6. Техникалык шарттар

Key technical specifications for the 3M BT-30 Hose:

  • Модель номери: BT-30
  • Бренд: 3M
  • Материал: Полиуретан (PU)
  • Түсү: Black/White (Hose is black, connector is blue as seen in image)
  • Элемент Салмагы: 9.5 унция (болжол менен 268 грамм)
  • Продукциянын өлчөмдөрү: 9.84 x 2.76 x 2.36 дюйм (упаковка өлчөмдөрү)
  • Камтылган компоненттер: Hose, Manual
  • ASIN: B01H4W4DVS

7. Кепилдик жана колдоо

For specific warranty information regarding your 3M BT-30 hose, please refer to the documentation provided at the time of purchase or contact 3M customer support directly. 3M products are manufactured to high-quality standards.

For technical assistance or further inquiries, please visit the official 3M webсайтына кириңиз же алардын кардарларды тейлөө бөлүмүнө кайрылыңыз. Колдоо ресурстарын, көп берилүүчү суроолорду жана байланыш маалыматын көп учурда төмөнкү жерден таба аласыз 3M Industrial Store on Amazon or the main 3M corporate webсайт.