1. Продукт бүтүп калдыview
The Steinbach Classic 250N Filtration System is a high-performance sand filter designed to maintain clean and clear water in above-ground pools. This powerful unit is suitable for pools with a capacity of up to 19,000 liters, ensuring efficient removal of impurities. It features a robust pump and a versatile 7-way valve for various operational modes.
2. Коопсуздук маалыматы
Please read all safety instructions carefully before installation and operation to prevent injury or damage. Keep this manual for future reference.
- Always disconnect the power supply before performing any maintenance or cleaning on the filter system.
- Ensure the electrical outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety.
- Do not operate the pump if the water temperature exceeds 35°C (95°F).
- Иштеп жаткан учурда балдарды фильтр системасынан алыс кармаңыз.
- Ensure all connections are secure and leak-free to prevent water damage or electrical hazards.
- The pump is not self-priming; ensure it is filled with water before starting.
3. Орнотуу жана орнотуу
Proper installation is crucial for the optimal performance of your filtration system. Follow these steps carefully:
3.1 Пакеттен чыгаруу жана компоненттерди текшерүү
Бардык компоненттер бар экенин жана бузулбаганын текшериңиз:
- Filter Tank (250 mm diameter)
- Pump Unit (230V / 200W)
- 7-Way Multi-Port Valve with Pressure Gauge
- Connecting Hoses (32/38 mm diameter)
- Негизги табак
- Clamps and Fittings
3.2 Filter Media Preparation
The system requires approximately 10 kg of filter sand with a granule size of 0.7 - 1.2 mm, or compatible filter balls. Refer to the specific instructions for filling the filter tank with your chosen media.
3.3 Assembly and Connection
- Place the base plate on a firm, level surface near your pool.
- Mount the filter tank and pump securely onto the base plate.
- Connect the pump to the filter tank and the multi-port valve using the provided hoses and fittings. Ensure all connections are tight to prevent leaks.
- Connect the system to your pool's skimmer and return lines using 32/38 mm hoses.
3.4 Оптималдуу жайгаштыруу
For gravity-fed operation, the water level in the pool should be above the sand filter. Avoid situations where the water level is below the filter, as this can hinder proper flow and operation.
4. Иштөө нускамалары
The 7-way multi-port valve allows for different operational modes. Always turn off the pump before changing the valve position.
- Чыпка: This is the standard operating mode for daily filtration. Water is pumped through the filter media, and clean water is returned to the pool.
- АРТКА ЖУУ: Used to clean the filter media. Water flows in reverse through the filter, dislodging trapped debris, which is then discharged to waste. Perform when pressure gauge indicates high pressure.
- ЖУУ: Used after backwashing to flush out any remaining debris from the filter media and lines before returning to FILTER mode. Water is discharged to waste.
- WASTE (EMPTY): Bypasses the filter and pumps water directly out of the pool to waste. Useful for lowering pool water level or vacuuming heavy debris directly to waste.
- RECIRCULATE (CIRCULATE): Чыпканы айланып өтүп, сууну түз эле бассейнге кайтарат. Химиялык заттарды чыпкалабай таратуу үчүн пайдалуу.
- ЖАБЫК: Closes all flow to the filter. Use only when the pump is off and for maintenance tasks that require isolating the filter.
To start operation, ensure the valve is set to FILTER, then turn on the pump. Monitor the pressure gauge for normal operating pressure.
5. Техникалык тейлөө
Regular maintenance ensures the longevity and efficiency of your Steinbach filtration system.
5.1 Артка жуу жана чайкоо
Perform backwashing when the pressure gauge reading is 0.2-0.3 bar (3-5 psi) above the clean filter pressure, or when water flow to the pool decreases significantly. Follow with a rinse cycle.
- Насосту өчүрүңүз.
- Клапанды АРТКА ЖУУГА коюңуз.
- Turn on the pump and backwash until the water in the sight glass (if present) runs clear (typically 2-3 minutes).
- Насосту өчүрүңүз.
- Клапанды ЧАЙТУУга коюңуз.
- Насосту күйгүзүп, 30-60 секунд чайкаңыз.
- Насосту өчүрүңүз.
- Set the valve back to FILTER.
- Кадимки чыпкалоону калыбына келтирүү үчүн насосту күйгүзүңүз.
5.2 Filter Media Replacement
Filter sand typically needs replacement every 3-5 years, depending on usage and water quality. Filter balls may require periodic cleaning or replacement as per their specific instructions.
5.3 Кышка даярдык
Before freezing temperatures, drain all water from the pump, filter tank, and hoses. Store the pump and valve in a dry, frost-free location. Cover the filter tank if it remains outdoors.
6. Кыйынчылыктарды
Жалпы маселелер жана алардын мүмкүн болуучу чечимдери үчүн бул бөлүмдү караңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Суунун аз агымы / Начар чыпкалоо | Clogged filter media; Clogged skimmer/pump basket; Air in system; Incorrect valve setting. | Perform backwash/rinse; Clean skimmer/pump basket; Bleed air from system; Set valve to FILTER. |
| Жогорку басым өлчөгүч көрсөткүчү | Кир фильтр каражаттары. | Артка жуу жана чайкоо циклин аткарыңыз. |
| Water leaking from valve/connections | Бошоң туташуулар; О-шакектер/прокладкалар бузулган. | Tighten connections; Inspect and replace O-rings/gaskets if necessary. |
| Насос толтурулбайт | Pump not filled with water; Air leak on suction side; Clogged impeller. | Fill pump with water; Check all suction side connections for leaks; Inspect and clear impeller. |
7. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | 040385 |
| Бренд | Штайнбах |
| Бассейндин максималдуу көлөмү | 19,000 литрге чейин |
| Circulation Capacity | 4,170 литр/саат |
| Насос кубаттуулугу | 6,000 liters/hour (non-self-priming) |
| Тtage | 230 V |
| Күч | 200 Вт |
| Max Max Суунун температурасы | 35 °C |
| Boiler Diameter | 250 мм |
| Туташуу диаметри | 32/38 мм |
| Сунушталган кумдун көлөмү | Болжол менен 10 кг |
| Recommended Granule Size | 0.7 - 1.2 мм |
| Продукциянын өлчөмдөрү (L x W x Y) | 43 x 27 x 58 см |
| Продукт Салмагы | 8.5 кг |
8. Кепилдик жана колдоо
For specific warranty details and terms, please refer to the documentation provided with your purchase. In general, products purchased through Amazon may be eligible for returns or replacements within 30 days, subject to Amazon's return policy.
For technical support, spare parts, or further assistance, please contact Steinbach customer service. Contact information can typically be found on the manufacturer's webсайтында же продуктунун таңгагында.
