Introduction
Сатып алганыңыз үчүн рахматasing the Pyle Multi-Guitar Stand, Model PGST43. This universal 7-slot display rack is designed to securely hold electric, acoustic, and bass guitars, as well as their cases. Its foldable and portable design makes it ideal for home studios, stages, or any space requiring efficient instrument storage. Constructed with a robust metal frame and featuring no-slip, non-scratch padding, this stand ensures reliable protection and preservation of your valuable instruments.
Коопсуздук маалыматы
- Ensure all components are securely fastened before placing instruments on the stand.
- Do not overload the stand beyond its intended capacity of 7 guitars.
- Төңкөрүшкө жол бербөө үчүн стендди тегиз, туруктуу бетке коюңуз.
- Keep the stand away from high-traffic areas where it might be accidentally bumped.
- Regularly inspect the padding and frame for any signs of wear or damage.
Кутуда эмне бар
Монтаждоону баштоодон мурун бардык компоненттердин бар экендигин текшериңиз:
Image: All components included in the Pyle Multi-Guitar Stand package. This includes the main frame bars, two padded base bars, a padded top bar with seven neck rests, and a set of screws and washers for assembly.
- Main Frame (Vertical Supports)
- Base Bars (2, with padding)
- Top Bar (with 7 padded neck rests)
- Connecting Rods (2)
- Screws and Washers (for assembly)
Орнотуу жана чогултуу
The Pyle Multi-Guitar Stand is designed for straightforward assembly. Follow these steps:
- Компоненттерди таңгактан чыгаруу: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Refer to the "What's in the Box" section to ensure all pieces are present.
- Attach Base Bars: Connect the two padded base bars to the main vertical supports using the provided screws and washers. Ensure they are aligned correctly and tighten securely.
- Install Connecting Rods: Attach the two connecting rods between the main vertical supports at the lower section. These rods provide additional stability to the base.
- Secure Top Bar: Fasten the top bar, which features the seven padded neck rests, to the upper section of the main vertical supports. Make sure the neck rests are facing forward.
- Акыркы бекемдөө: Once all components are in place, double-check and tighten all screws to ensure the stand is stable and rigid. Avoid over-tightening, which could damage the frame.
Image: An illustration of the assembled guitar stand, highlighting its rugged construction, velveteen rubber padding, and black powder-coat finish. This image provides a visual reference for the completed assembly.
Иштөө нускамалары
Using your Pyle Multi-Guitar Stand is simple and effective:
- Жайгашкан жери: Position the stand on a level, stable surface in your desired location, ensuring there is enough space around it for easy access to your instruments.
- Loading Guitars: Gently place your guitars into the designated slots. The body of the guitar should rest on the padded base bars, and the neck should be supported by the padded neck rests on the top bar.
- Шайкештик: The stand is universally compatible with electric, acoustic, and bass guitars. It can accommodate up to 7 instruments, depending on their body thickness.
- Көчүрүү мүмкүнчүлүгү: For transport or storage, the stand can be easily collapsed. Loosen the assembly screws (do not remove completely) to fold the frame, then re-tighten for compact storage.
Image: The Pyle Multi-Guitar Stand holding a variety of guitars, demonstrating its capacity and universal compatibility. The guitars are securely positioned on the stand's padded supports.
Сүрөт: жакыныраак view of the stand holding three different types of guitars, emphasizing its universal design for acoustic, electric, and bass instruments.
Техникалык тейлөө
To ensure the longevity and optimal performance of your Pyle Multi-Guitar Stand, follow these maintenance guidelines:
- Тазалоо: Металл раманы жумшак, d менен сүртүңүзamp cloth. Avoid abrasive cleaners or solvents that could damage the powder-coat finish.
- Төшөмөлөрдү текшерүү: Regularly check the velveteen rubber padding on the base and neck rests for any signs of wear, tears, or degradation. Damaged padding should be replaced to prevent scratches to your instruments.
- Бекер текшерүү: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability.
- Сактагыч: When not in use for extended periods, or for transport, collapse the stand and store it in a dry, cool place to prevent rust or material degradation.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Stand wobbles or feels unstable. | Бошогон бурамалар же тегиз эмес бет. | Ensure all assembly screws are tightened securely. Move the stand to a flat, level surface. |
| Guitars slide or are not secure. | Damaged or worn padding. | Inspect the velveteen rubber padding. If damaged, contact Pyle support for replacement parts. |
| Difficulty collapsing/folding the stand. | Screws are too tight or components are misaligned. | Slightly loosen the main assembly screws (do not remove) to allow for folding. Ensure components are aligned correctly. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | PGST43 |
| Материал | Эритме болот |
| Түс | Кара |
| Кубаттуулугу | Up to 7 Guitars (Electric, Acoustic, Bass) |
| Продукциянын өлчөмдөрү (жыйылган) | 35.04" (Т) x 20.87" (Т) x 28.74" (Бийиктиги) |
| Элемент Салмагы | 4.4 фунт (2 килограмм) |
| Аяктоо түрү | Powder капталган |
| Өзгөчөлүктөр | Lightweight, Portable, Foldable Design, Non-Scratch Padding |
Image: A visual representation of the Pyle Multi-Guitar Stand's assembled dimensions, including its length, width, height, and the spacing between the neck support pegs.
Кепилдик жана колдоо
Кепилдик маалыматы жана техникалык колдоо үчүн, сураныч, сатып алууда камтылган документтерди караңыз же расмий Pyleге баш багыңыз webсайт. Сиз ошондой эле кошумча булактарды жана байланыш маалыматын таба аласыз www.pyleusa.com.
Сураныч, кепилдик дооматтар үчүн сатып алуу далилиңизди сактап коюңуз.
