LC-Power LC-DOCK-U3-III USB 3.0 Dual Bay HDD док станциясынын колдонуучу колдонмосу

1. Бүттүview

The LC-Power LC-DOCK-U3-III is a versatile USB 3.0 dual bay docking station designed for 2.5-inch and 3.5-inch SATA HDDs/SSDs. It provides a convenient solution for accessing multiple hard drives, data backup, and disk cloning without the need for a computer connection. This manual provides detailed instructions for setup, operation, and maintenance of your docking station.

Сүрөт 1.1: Алдыңкы view of the LC-Power LC-DOCK-U3-III Docking Station, showing two drive bays and LED indicators.

2. Продукциянын өзгөчөлүктөрү

• Supports two 2.5-inch or 3.5-inch SATA I/II/III HDDs/SSDs simultaneously.
• USB 3.0 interface for high-speed data transfer (up to 5 Gbps).
• USB 2.0 менен артка шайкеш келет.
• Standalone clone function (computer-independent disk duplication).
• LED indicators for power, activity, and cloning progress.
• Plug & Play functionality, no driver installation required for most operating systems.
• Windows, macOS жана Linux операциялык системалары менен шайкеш келет.

3. Пакеттин мазмуну

Сураныч, пакетте төмөнкү нерселерди текшериңиз:

• LC-Power LC-DOCK-U3-III Docking Station
• USB 3.0 Кабель
• Кубаттуу адаптер
• Колдонуучунун Колдонмосу (бул документ)

Image 3.1: Retail packaging of the LC-Power LC-DOCK-U3-III, showing the product and key features.

4. Орнотуу нускамалары

Follow these steps to set up your docking station:

1. Туташуу кубаты: Connect the included power adapter to the DC 12V port on the back of the docking station and then plug it into a power outlet.
2. Connect to Computer (Optional for cloning): Connect the USB 3.0 cable from the docking station's USB 3.0 port to an available USB 3.0 port on your computer. If your computer only has USB 2.0 ports, the device will still function but at USB 2.0 speeds.
3. Катуу дисктерди киргизүү:
   • Ensure the docking station is powered off (ON/OFF switch in OFF position).
   • Carefully insert your 2.5-inch or 3.5-inch SATA HDDs/SSDs into the drive bays. Ensure they are firmly seated.
4. Күйгүзүү: Flip the ON/OFF switch on the back of the docking station to the ON position. The power LED will illuminate.

Image 4.1: Rear panel of the docking station, highlighting the USB 3.0 port, DC 12V power input, and ON/OFF switch.

Сүрөт 4.2: Мисample of 2.5-inch and 3.5-inch hard drives correctly inserted into the docking station bays.

5. Иштөө нускамалары

5.1. Data Transfer Mode (Connected to Computer)

1. Ensure the docking station is connected to your computer via the USB 3.0 cable and powered on.
2. Insert one or two SATA HDDs/SSDs into the bays.
3. Операциялык системаңыз дисктерди автоматтык түрдө аныкташы керек. Алар алынуучу сактагыч түзмөктөр катары көрсөтүлөт.
4. You can now access, read, and write data to the drives as you would with any other external storage.
5. Маанилүү: Always use the "Safely Remove Hardware" option in your operating system before disconnecting the docking station or removing drives to prevent data corruption.

5.2. Standalone Clone Function

The cloning function allows you to duplicate a source drive to a target drive without a computer connection. The target drive must be equal to or larger than the source drive's capacity.

1. Даярдоо:
   • Ensure the docking station is powered off and disconnected from the computer.
   • салыңыз Баштапкы диск (the drive you want to copy FROM) into the HDD1 (Source) булуң.
   • салыңыз Максаттуу Drive (the drive you want to copy TO) into the HDD2 (Target) булуң.
   • Verify that the target drive has equal or greater capacity than the source drive. All data on the target drive will be overwritten.
2. Клондоону баштоо:
   • Док станциясын күйгүзүңүз.
   • Press and hold the "Clone" button (often labeled "One Touch Clone" or similar) for approximately 3-5 seconds until the cloning progress LEDs begin to flash.
   • Release the button. The cloning process will begin.
3. Прогресс мониторинги: The LED indicators (e.g., 25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning progress.
4. Аяктоо: Бардык прогресс LED индикаторлору бекем болгондон кийин, клондоо процесси аяктады.
5. Өчүрүү жана алып салуу: Power off the docking station before removing the drives.

Warning: Do not interrupt the cloning process. Doing so may result in data loss or corruption on both drives.

6. Техникалык тейлөө

• Тазалоо: Use a soft, dry cloth to clean the exterior of the docking station. Do not use liquid cleaners or solvents.
• Сактагыч: Колдонулбай турган учурда, док-станцияны салкын, кургак жерде, күндүн түз нурунан жана өтө жогорку температурадан алыс сактаңыз.
• Колдонуу: Handle the docking station and hard drives with care to avoid physical damage. Avoid dropping or subjecting the device to strong impacts.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Коопсуздук маалыматы

• Do not expose the device to moisture, dust, or extreme temperatures.
• Берилген кубат адаптерин гана колдонуңуз. Уруксат берилбеген адаптерлерди колдонуу түзмөккө зыян келтирип, кепилдикти жокко чыгарышы мүмкүн.
• Аппаратты өз алдынча бөлүүгө же оңдоого аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
• Аппаратты күчтүү магнит талаасынан алыс кармаңыз.
• Иштеп жаткан учурда аппараттын айланасында туура желдетүүнү камсыз кылыңыз.

10. Кепилдик жана колдоо

LC-Power products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official LC-Power website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact LC-Power customer service through their official channels.

LC-Power Official Webсайт: www.lc-power.com