Pyle PTVSTNDPT3215

Pyle PTVSTNDPT3215 Portable TV Tripod Stand

Колдонуучунун инструкциясы

1. Киришүү

Thank you for choosing the Pyle PTVSTNDPT3215 Portable TV Tripod Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new TV stand. Please read these instructions thoroughly before use and retain them for future reference.

Pyle PTVSTNDPT3215 Portable TV Tripod Stand, fully assembled.

Figure 1: Pyle PTVSTNDPT3215 Portable TV Tripod Stand

2. Коопсуздук маалыматы

Травматизмди же буюмга зыян келтирбөө үчүн төмөнкү коопсуздук чараларын сактаңыз:

  • Салмак сыйымдуулугу: Do not exceed the maximum weight load capacity of 88.8 фунт (40.3 кг).
  • TV өлчөмү: This stand is designed for TVs up to 32 дюйм. Using larger TVs may compromise stability.
  • Туруктуулук: Ensure the tripod legs are fully extended and locked into position on a flat, stable surface before mounting any equipment.
  • Ассамблея: Бардык чогултуу көрсөтмөлөрүн кылдаттык менен аткарыңыз. Туура эмес чогултуу туруксуздукка жана жаракат алууга алып келиши мүмкүн.
  • Балдар жана үй жаныбарлары: Keep children and pets away from the stand during assembly and operation.
  • Кыймыл: Do not move the stand with a TV mounted on it unless absolutely necessary. If moving, ensure the TV is securely fastened and move slowly and carefully.
  • Текшерүү: Стендде эскирүүнүн, бузулуунун же бош бөлүктөрүнүн бар-жоктугун дайыма текшерип туруңуз. Бузулган болсо колдонбоңуз.

3. Пакеттин мазмуну

Монтаждоону баштоодон мурун бардык компоненттер бар экендигин текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же бузулуп калса, кардарларды колдоо менен байланышыңыз.

  • Tripod Base Assembly
  • Telescopic Center Pole
  • VESA монтаждоо плитасы
  • Mounting Hardware (screws, washers, spacers for TV attachment)
  • Көрсөтмө (бул документ)
Image showing the Pyle PTVSTNDPT3215 Portable TV Tripod Stand components in a box, labeled 'What's in the Box?'.

2-сүрөт: Камтылган компоненттер

4. Орнотуу нускамалары

Follow these steps to assemble your Pyle PTVSTNDPT3215 TV Tripod Stand.

4.1. Assemble the Tripod Base

  1. Place the tripod base on a flat, stable surface.
  2. Extend the three legs outwards until they are fully spread and the locking mechanism engages. Ensure the anti-slip rubber feet are firmly on the ground.
  3. Insert the telescopic center pole into the top of the tripod base. Secure it by tightening the knob on the tripod base.
Close-up image of the tripod base with anti-slip footing, labeled 'Built to Grip'.

Figure 3: Tripod Base with Anti-Slip Footing

4.2. Attach the VESA Mounting Plate

  1. Attach the VESA mounting plate to the top of the telescopic center pole. Align the holes and secure it with the provided screws and nuts.
  2. Ensure the plate is firmly attached and does not wobble.

4.3. Mount the TV

Before mounting, identify the VESA mounting pattern on the back of your TV. This stand supports VESA patterns including 75x75mm, 100x100mm, 100x200mm, 200x200mm, and 220x220mm.

  1. Carefully align the VESA mounting holes on the back of your TV with the holes on the mounting plate.
  2. Using the appropriate screws, washers, and spacers from the provided hardware kit, securely fasten your TV to the mounting plate. Do not overtighten.
  3. Gently test the stability of the mounted TV before releasing it completely.
Image showing a TV mounted on the tripod stand, with labels for 'Wide TV Compatibility', 'Weight Load Capacity 88.8lbs', and 'Vesa Mount Compatibility 200x200 / 220x220'.

Figure 4: TV Compatibility and VESA Mount

5. Иштөө нускамалары

This section details how to adjust and use your TV tripod stand.

5.1. Бийиктигин тууралоо

  1. Loosen the height adjustment knob on the telescopic center pole.
  2. Carefully raise or lower the pole to your desired viewing height, within the range of 32.3 дюймдан 59.8 дюймга чейин.
  3. Once the desired height is reached, firmly tighten the adjustment knob to lock the pole in place.
Image showing a TV on the tripod stand with an arrow indicating height adjustment from 32.3 inches to 95.8 inches, and close-ups of the locking mechanisms.

Figure 5: Height Adjustment with Locking Mechanism

5.2. жантайып тууралоо

  1. The VESA mounting plate allows for tilt adjustment. Loosen the tilt adjustment screws on the side of the mounting plate.
  2. Adjust the TV to the desired tilt angle, ranging from -5 үчүн + 25 градус.
  3. Firmly tighten the tilt adjustment screws to secure the TV in position.
Image showing a TV on the tripod stand with an arrow indicating tilt adjustment from -5 to 25 degrees, labeled 'Immersive View'.

Figure 6: Tilt Adjustment for Optimal Viewing

5.3. Folding for Storage/Transport

  1. Remove the TV from the mounting plate.
  2. Loosen the height adjustment knob and fully retract the telescopic pole.
  3. Release the locking mechanism on the tripod legs and fold them inwards.
  4. The stand can now be stored or transported in its compact, folded state.

6. Техникалык тейлөө

To ensure the longevity and proper function of your TV tripod stand, follow these maintenance guidelines:

  • Тазалоо: Стендди жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар капталга зыян келтириши мүмкүн.
  • Текшерүү: Periodically check all screws, bolts, and knobs to ensure they are tight. Re-tighten if necessary.
  • Сактагыч: When not in use, store the stand in a dry, cool place, away from direct sunlight and extreme temperatures.

7. Кыйынчылыктарды

If you encounter issues with your Pyle PTVSTNDPT3215, refer to the following common problems and solutions:

КөйгөйМүмкүн себепЧечим
Stand is unstable or wobbles.Legs not fully extended/locked; uneven surface; weight capacity exceeded.Ensure legs are fully extended and locked. Move to a flat, stable surface. Verify TV weight is within limits.
TV is not securely attached.Screws are loose; incorrect VESA pattern used; wrong screw size.Tighten all mounting screws. Confirm TV's VESA pattern matches the stand. Use correct screw length with spacers if needed.
Height adjustment knob does not hold.Knob not tightened enough; internal mechanism worn.Ensure knob is tightened firmly. If issue persists, contact customer support.
Tilt adjustment does not hold.Tilt screws not tightened enough.Firmly tighten the tilt adjustment screws.

8. Техникалык шарттар

Модель номериPTVSTNDPT3215
TV өлчөмү шайкештиги32 дюймга чейин
VESA шайкештиги75x75mm, 100x100mm, 100x200mm, 200x200mm, 220x220mm
Бийиктигин тууралоо диапазону32.3 дюймдан 59.8 дюймга чейин
Тилтти жөндөө диапазону-5 үчүн + 25 градус
Max. Weight Load Capacity88.8 фунт (40.3 кг)
Курулуш материалыSteel Alloy, Metal
Бүктөлгөн өлчөмдөрү (L x W x Y)34.2'' x 4.5'' x 3.9'' дюйм
Total Assembled Dimensions (L x W x H)27.5'' x 27.5'' x 59.8'' inches (at max height)
Элемент Салмагы5.7 фунт (2.6 кг)

9. Кепилдик жана колдоо

Pyle өнүмдөрү ишенимдүүлүк жана иштөө үчүн иштелип чыккан. Кепилдик жөнүндө так маалымат алуу үчүн, сатып алууңузга тиркелген кепилдик картасын караңыз же Pyle компаниясынын расмий веб-сайтына кириңиз. website. If you require technical assistance or have questions regarding your PTVSTNDPT3215 stand, please contact Pyle customer support through their official channels.

Онлайн колдоо: www.pyleusa.com

Тектеш документтер - PTVSTNDPT3215

Preview Pyle PLPTS2/PLPTS3/PLPTS4 Universal Device Stand User Guide
Pyle PLPTS2, PLPTS3 жана PLPTS4 бийиктиги жөндөлүүчү штатив аппаратынын стенддери үчүн колдонуучу колдонмосу. Функцияларга тез орнотуу, бышык конструкция жана ноутбуктар, миксерлер жана ди-джей жабдуулары үчүн ылайыктуулугу кирет. Техникалык мүнөздөмөлөр жана монтаждоо көрсөтмөлөрү берилген.
Preview Pyle PRJTP Series Tripod Stand Projector Screens User Guide & Specifications
Comprehensive user guide and specifications for Pyle PRJTP60, PRJTP80, PRJTP102, PRJTP103, and PRJTP120 tripod stand projector screens. Learn about setup, features, and maintenance.
Preview Pyle PSTND32 Universal Device Stand User Manual
Pyle PSTND32 Universal Device Stand үчүн колдонуучунун колдонмосу. Камтылган компоненттер, монтаж кадамдары жана туткаларды жана бекиткичтерди колдонуу менен бийиктикти жөндөө боюнча кеңири маалымат берет. колдоо байланыш маалыматын камтыйт.
Preview Pyle PLCTND44 Компакт жана портативдик подиум - жөнгө салынуучу сүйлөө жана презентация стенди
Pyle PLCTND44, сүйлөө жана презентациялар үчүн арналган компакттуу жана көчмө трибунаны табыңыз. Бул жөнгө салынуучу полго турган стилдеги стенд мектептер, кеңселер жана студиялар үчүн эң сонун ыңгайлуулукту, бышыктыкты жана эргономикалык дизайнды сунуштайт. Функцияларга жантайма үстүңкү платформа, бийиктикти жөндөө жана алынуучу тегиздөө буттары кирет.
Preview Pyle PKST64 Heavy Duty Keyboard Stand User Manual
2-даражалуу Pyle PKST64 оор жүктөөчү клавиатура стенди үчүн монтаждоо көрсөтмөлөрү, өзгөчөлүктөрү жана техникалык мүнөздөмөлөрү. Ар кандай музыкалык жабдуулар үчүн бийиктиги жана туурасы жөндөлүүчү функцияларды кантип чогултууну жана колдонууну үйрөнүңүз.
Preview Pyle PSTND32 Universal Device Stand User Manual
Pyle PSTND32 Universal Device Stand үчүн колдонуучунун колдонмосу, оптималдуу орнотуу жана колдонуу үчүн продукт компоненттери жана монтаждоо нускамалары.