1. Продукт бүтүп калдыview
The Futaba 3PV is a versatile three-channel 2.4 Gigahertz computerized radio control surface transmitter designed for various RC surface models. It supports FHSS, S-FHSS, and T-FHSS protocols, offering broad compatibility and advanced features. This system includes the R304SB T-FHSS Telemetry Receiver, which provides real-time feedback on critical parameters such as transmitter and receiver voltage.
Key features include a large, easy-to-read display screen for intuitive menu navigation, and conveniently positioned digital trims for steering, throttle, and steering dual rate. The transmitter is powered by four 'AA' batteries (not included), which can be alkaline, Nickel-Metal Hydride, or a lithium pack.
Image 1.1: The Futaba 3PV Three-Channel 2.4GHz Computerized Radio Control Surface Transmitter.
2. Орнотуу
2.1 Батареяны орнотуу
The 3PV transmitter requires four 'AA' size batteries. These can be alkaline, Nickel-Metal Hydride (NiMH), or a compatible lithium pack. Ensure correct polarity when inserting batteries.
- Locate the battery compartment cover on the base of the transmitter.
- Капкакты белгилерге ылайык жылдырып ачыңыз же алып салыңыз.
- Insert four 'AA' batteries, observing the polarity (+/-) indicators inside the compartment.
- Батарея бөлүкчөсүнүн капкагын бекем орнотуңуз.
Image 2.1: Open battery compartment showing battery holder for four 'AA' batteries.
2.2 Receiver Binding (Linking)
To establish communication between the 3PV transmitter and the R304SB receiver, they must be linked (bound). This process ensures that your transmitter only controls your specific receiver.
- Өткөргүчтү күйгүзүңүз.
- Connect a battery to the receiver and turn it on. The receiver's LED will blink.
- Press and hold the Link button on the receiver for approximately 2 seconds. The LED will change from blinking to solid green, indicating successful binding.
- Release the Link button.
- Turn off both the transmitter and receiver, then turn them back on to confirm the link. The receiver's LED should immediately be solid green.
Note: Refer to the detailed receiver manual for specific binding procedures if issues arise.
3. Иштөө нускамалары
3.1 Негизги башкаруу каражаттары
The 3PV transmitter features standard surface radio controls for intuitive operation.
- Руль: Controls the direction of your vehicle. Turning the wheel left or right will steer the model accordingly.
- дроссель триггери: Controls the speed and direction (forward/reverse) of your vehicle. Pulling the trigger back increases forward speed, pushing it forward activates the brake or reverse.
- Санариптик жасалгалар: Small buttons located around the steering wheel for fine-tuning steering, throttle, and steering dual rate. These allow for precise adjustments without affecting the main control inputs.
Сүрөт 3.1: Жакын пландан view of the steering wheel and digital trim buttons.
3.2 Дисплей экраны жана меню навигациясы
The large LCD screen provides access to various settings and telemetry data. Navigation is typically done using the buttons below the screen.
- Менюга кирүү: Press the designated menu button (refer to the screen labels) to enter the main menu.
- Навигация: Меню параметрлери аркылуу жылдыруу үчүн жебе баскычтарын колдонуңуз.
- Selection/Adjustment: Press the enter button to select an option or confirm a setting. Use the +/- buttons to adjust values.
Image 3.2: The 3PV's large screen displaying various settings and telemetry information.
3.3 Telemetry Functions
The included R304SB T-FHSS receiver supports telemetry, allowing you to monitor real-time data from your model directly on the transmitter's screen. The primary telemetry function is monitoring transmitter and receiver voltage.
- Transmitter Voltage (TX V): Учурдагы томду көрсөтөтtage of the batteries powering your 3PV transmitter.
- Receiver Voltage (RX V): Учурдагы томду көрсөтөтtage supplied to your R304SB receiver in the model.
Monitoring these values helps ensure your system has adequate power during operation and can alert you to low battery conditions.
4. Техникалык тейлөө
Proper maintenance ensures the longevity and reliable performance of your Futaba 3PV system.
- Тазалоо: Use a soft, dry cloth to clean the transmitter and receiver. Avoid using solvents or harsh chemicals, as they may damage the plastic or electronic components.
- Сактагыч: Store the transmitter and receiver in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if it will not be used for an extended period to prevent leakage.
- Батареяга кам көрүү: Always use fresh batteries or fully charged rechargeable batteries. Do not mix old and new batteries, or different types of batteries.
- Текшерүү: Periodically inspect all cables and connectors for signs of wear or damage. Ensure the antenna is not bent or broken.
5. Кыйынчылыктарды
This section addresses common issues you might encounter with your Futaba 3PV system.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Өткөргүч күйбөйт. | Өлүк же туура эмес орнотулган батарейкалар. | Батареянын полярдуулугун текшериңиз. Жаңы батареялар менен алмаштырыңыз. |
| No control of model. | Receiver not bound to transmitter; receiver not powered; damaged receiver/servo. | Perform binding procedure. Check receiver power connection. Inspect receiver and servos for damage. |
| Erratic control or short range. | Тоскоолдук; өткөргүч/кабыл алуучу батареянын заряды аз; антенна бузулган. | Operate in an open area away from other 2.4GHz devices. Check battery levels. Inspect antennas on both transmitter and receiver. |
| Телеметрия маалыматтары көрсөтүлгөн жок. | Receiver not T-FHSS; telemetry function not enabled; poor signal. | Ensure R304SB receiver is used. Check transmitter settings for telemetry display. Improve signal strength. |
6. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Futaba |
| Модель аты | 3PV |
| Модель номери | FUTK3200 |
| Каналдар | 3 |
| Жыштык | 2.4 ГГц |
| Протоколдор колдоого алынат | FHSS, S-FHSS, T-FHSS |
| Included Receiver | R304SB T-FHSS Telemetry Receiver |
| Telemetry Functions | Transmitter and Receiver Voltage |
| Электр камсыздоо | 4 "AA" batteries (Alkaline, NiMH, or Lithium pack) |
| Элементтин өлчөмдөрү (L x W x Y) | 9.88" x 7.25" x 4.75" |
| Элемент Салмагы | 1.1 фунт |
| Материалдын түрү | Metal (internal components) |
Image 6.1: Dimensions of the Futaba 3PV transmitter.
7. Кепилдик жана колдоо
Futaba products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the documentation included with your product or visit the official Futaba webсайт.
For technical support, service, or inquiries regarding your Futaba 3PV system, please contact Futaba customer service directly. Contact information can typically be found on the manufacturer's webсайтында же продуктунун таңгагында.
Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.
