KNIPEX Cobra QuickSet Pump Pliers

Introduction

The KNIPEX Cobra QuickSet Pump Pliers, Model 87 22 250 SBA, are designed for efficient gripping and adjustment in various applications. This tool combines the reliable locking mechanism of traditional Cobra pliers with an additional push function for quick adjustments, particularly useful in confined spaces.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Reliable hinge bolt locking with an additional push function for quick adjustments.
• Direct adjustment on the workpiece by simply sliding the pliers handle.
• Gripping width is fixed after the first workload and can only be adjusted by pressing the button.
• To reactivate the sliding function, the hinge bolt must be released by pressing the push button and the pliers must be completely opened.
• Constructed from chrome vanadium electric steel, forged and oil-hardened for durability.

Сүрөт: бүттүview of the KNIPEX Cobra QuickSet Pump Pliers, showcasing their design and multi-component handles.

Орнотуу жана баштапкы тууралоо

The Cobra QuickSet pliers feature a unique adjustment mechanism. Before first use or when changing workpiece sizes, understand the two primary adjustment methods:

1. Push-Button Adjustment (Standard Cobra Function):

   To adjust the gripping width precisely, press the red button located at the pivot point. While holding the button, slide the jaws open or closed to the desired width. Release the button to lock the jaws in place. This method provides fine adjustment for various sizes.

   

   Сүрөт: алдыңкы view of the pliers, showing the push-button for adjustment.

2. QuickSet Function (Sliding Adjustment):

   For rapid adjustment, especially in confined spaces, the QuickSet function allows you to slide the pliers handle directly onto the workpiece without pressing the button. The hinge bolt will automatically engage with the first workload, fixing the gripping width. To reactivate the sliding function, you must fully open the pliers and then press the red button to release the hinge bolt.

   

   Сүрөт: каптал view of the pliers, illustrating the open jaws for sliding adjustment.

Иштөө нускамалары

The KNIPEX Cobra QuickSet Pliers are designed for secure gripping of various shapes, including round, square, and hexagonal workpieces. Follow these steps for optimal use:

1. Selecting the Gripping Width:

   Choose between the push-button adjustment for precise settings or the QuickSet sliding function for rapid, on-workpiece adjustments. For the QuickSet, simply open the jaws wide enough to fit over the workpiece, then slide the pliers until the jaws engage. The hinge bolt will lock upon initial pressure.

   

   Image: Demonstrates sliding the pliers onto a workpiece for quick adjustment.

2. Applying Grip:

   Once the jaws are set to the correct size, apply firm pressure to the handles. The specially hardened teeth provide a strong, self-locking grip, preventing slippage even under high torque. This self-locking effect means less hand force is required, reducing fatigue.

   

   Image: Pliers securely gripping a hexagonal bolt, illustrating the self-locking mechanism.

3. Reactivating QuickSet:

   If the QuickSet function is locked (i.e., the pliers are only adjustable via the button), fully open the pliers until the jaws are at their widest point. Then, press the red adjustment button. This action resets the hinge bolt, allowing the sliding QuickSet adjustment to be used again.

   

   Image: Pliers shown fully open, indicating the position required to reset the QuickSet function.

Расмий продукт Video

Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your KNIPEX Cobra QuickSet Pliers:

• Тазалоо: After each use, wipe the pliers clean with a dry cloth to remove dirt, grease, or debris. For stubborn grime, use a mild solvent and ensure the pliers are thoroughly dried afterward.
• Майлоо: Periodically apply a light machine oil to the pivot point and adjustment mechanism to ensure smooth operation. Wipe off any excess oil.
• Сактагыч: Store the pliers in a dry environment to prevent rust. Avoid storing them in damp conditions or where they might be exposed to corrosive chemicals.
• Текшерүү: Regularly inspect the jaws for wear or damage. Ensure the teeth are sharp and free from obstructions. Check the handles for any signs of damage or loosening.

Проблемаларды чечүү

If you encounter issues with your KNIPEX Cobra QuickSet Pliers, consider the following common solutions:

• Pliers not gripping securely:

  Ensure the jaws are properly adjusted to the workpiece size. The self-locking effect relies on correct jaw engagement. Check for excessive wear on the gripping teeth; if severely worn, the pliers may need replacement.
• QuickSet sliding function not working:

  The QuickSet function locks after the first use. To reactivate it, fully open the pliers and then press the red adjustment button. This resets the mechanism, allowing for sliding adjustment again. Ensure the pivot point is clean and lubricated.

• Stiff adjustment button or pivot:

  Clean any accumulated dirt or debris from the pivot area and the adjustment button. Apply a small amount of light machine oil to lubricate these parts. Operate the pliers several times to distribute the lubricant.

If problems persist, contact KNIPEX customer support for further assistance.

Техникалык шарттар

Кепилдик жана колдоо

KNIPEX tools are manufactured to high-quality standards and are designed for durability and performance. For specific warranty information, please refer to the documentation included with your purchase or visit the official KNIPEX webсайт.

For technical support, replacement parts, or service inquiries, please contact KNIPEX customer service through their official channels. Keep your model number (87 22 250 SBA) and purchase date readily available when contacting support.

Көбүрөөк маалымат жана байланыш маалыматтарын даректен таба аласыз KNIPEX Store on Amazon.