GÜDE GSB 20/812 R+L Pillar Drill Instruction Manual

1. Продукт бүтүп калдыview

The GÜDE GSB 20/812 R+L is a robust pillar drill designed for precise drilling in metal or wood. It features high spindle rotation precision, ensuring accurate results for various applications. The work table height is adjustable to accommodate different workpiece sizes, and the base is equipped with holes for secure floor mounting.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Мотор кубаттуулугу: 800 Вт
• Шпинделдин соккусу: 80 мм
• Spindle Speed: 210-2500 min-1 (12 speeds)
• Chuck Capacity: 1-16 mm (Morse Taper B16)
• Throat Depth: 169 mm
• High Spindle Rotation Precision (<0.02 mm)
• Forward and Reverse Rotation Function
• Adjustable Grey Cast Iron Work Table
• Катуу базалык плита

This image shows the GÜDE GSB 20/812 R+L Pillar Drill, highlighting its overall structure and dimensions. The drill features a sturdy column, adjustable work table, and a drill head with controls. Arrows indicate both forward and reverse rotation capabilities. The total height is approximately 1580 mm.

2. Коопсуздук нускамалары

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when operating this power tool. Read and understand all instructions before use.

Жалпы коопсуздук

• Жумуш аймагынын коопсуздугу: Жумушчу жерди таза жана жакшы жарыктандырыңыз. Башаламан же караңгы жерлер кырсыкка чакырат.
• Электр коопсуздугу: Ensure the power supply matches the specifications (400 V – 50 Hz). Do not expose power tools to rain or wet conditions.
• Жеке коопсуздук: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and sturdy footwear. Avoid loose clothing, jewelry, and long hair that can get caught in moving parts.
• Куралды тейлөө: Оңдоолорду жасоодон, аксессуарларды алмаштыруудан же электр шаймандарын сактоодон мурда вилканы кубат булагынан ажыратыңыз.
• Шашылыш токтотуу: Авариялык токтотуу баскычынын жайгашкан жери жана иштеши менен таанышыңыз.

Pillar Drill Specific Safety

• Коопсуз жумуш бөлүгү: Ар дайым clamp the workpiece securely to the work table using appropriate clamps or a vice. Never hold the workpiece by hand.
• Туура ылдамдык: Select the correct drilling speed for the material and drill bit size. Too high a speed can burn the material or dull the bit; too low a speed can cause tearing.
• Drill Bit Condition: Use sharp, undamaged drill bits. Dull or damaged bits can cause kickback or breakage.
• Тереңдик токтотуу: Utilize the depth stop for consistent and controlled drilling depth.
• Тазалоо: Ensure adequate clearance for the drill bit and chuck above and below the workpiece.
• Муздаткыч: For metal drilling, use appropriate cutting fluid to prolong drill bit life and improve cut quality.

3. Орнотуу жана чогултуу

The GSB 20/812 R+L pillar drill requires assembly before first use. Follow these steps carefully.

Пакеттен чыгаруу жана компоненттерди текшерүү

Carefully unpack all components and check against the packing list. The included components are:

• Машина башчысы
• Мамыча
• Негизги табак
• Жумуш столу
• Keyless Chuck (1-16 mm)
• Чак Гвардия
• Morse Taper (B16)

Чогултуу кадамдары

1. Attach Column to Base Plate: Securely fasten the column to the base plate using the provided hardware. Ensure it is stable and upright.
2. Жумуш үстөлүн орнотуу: Slide the work table onto the column. Adjust its height and secure it with the locking mechanism.
3. Install Drill Head: Carefully place the drill head assembly onto the top of the column. Secure it firmly according to the instructions.
4. Insert Morse Taper and Chuck: Clean the Morse taper (B16) and the spindle bore. Insert the taper into the spindle, then firmly attach the keyless chuck to the taper. A light tap with a rubber mallet may be needed to seat it properly.
5. Attach Chuck Guard: Install the chuck guard for safety. Ensure it can be easily adjusted or moved for workpiece access while providing protection during operation.
6. Электр байланышы: Connect the drill to a 400 V – 50 Hz power supply. Ensure proper grounding.
7. Secure to Floor (Optional but Recommended): For maximum stability and safety, fix the base plate to the floor using appropriate anchors through the pre-drilled holes.

4. Иштөө нускамалары

Follow these steps for safe and effective operation of your GÜDE pillar drill.

Күйгүзүү/өчүрүү

• Баштоо: Press the green 'ON' button.
• Токтотуу: Press the red 'OFF' button or the emergency stop button.

Ылдамдыкты жөндөө

The drill offers 12 speed settings, ranging from 210 to 2500 min-1. Speed is adjusted by changing the position of the drive belt on the pulleys located under the top cover. Always disconnect power before opening the belt cover and adjusting speeds.

1. Disconnect the drill from the power supply.
2. Open the belt cover.
3. Loosen the motor tensioning lever.
4. Refer to the speed chart inside the belt cover to select the desired speed by repositioning the belt.
5. Re-tension the motor and close the belt cover.
6. Кубатты кайра туташтырыңыз.

Depth Stop Adjustment

The depth stop allows for consistent drilling to a predetermined depth.

1. Бургулоочу учту ал даярдалган бөлүккө тийгенге чейин ылдый түшүрүңүз.
2. Lock the spindle in this position.
3. Adjust the depth stop collar to the desired depth and tighten its locking screw.
4. Release the spindle. The drill will now stop at the set depth.

Чак жана Бургулоо Орнотуу

1. Ensure the drill is disconnected from power.
2. Open the keyless chuck jaws by rotating the chuck sleeve.
3. Бургулоочу учту патронго киргизиңиз, анын ортосуна жана бекем орнотулганына ынаныңыз.
4. Tighten the chuck jaws securely by hand.

Алдыга жана артка айлануу

This model supports both forward (R) and reverse (L) rotation, indicated by the 'R+L' symbol. The direction of rotation can be selected via a switch on the control panel. Reverse rotation is useful for tapping or backing out stuck drill bits.

Workpiece Clamping

Ар дайым clamp your workpiece securely to the work table using a drill press vice or appropriate clamps. This prevents the workpiece from spinning, which can cause injury or damage.

5. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин мамыча бургулоочуңуздун узак мөөнөттүү жана коопсуз иштешин камсыз кылат.

• Тазалоо: After each use, clean the drill of dust, chips, and debris. Use a brush or vacuum cleaner. Never use compressed air directly on bearings.
• Майлоо: Periodically lubricate moving parts such as the column, rack, and pinion for table adjustment. Use light machine oil.
• Кур чыңалуу: Check the drive belt tension regularly. A loose belt can slip, reducing power and causing wear. Adjust as per the speed adjustment instructions.
• Чакты тейлөө: Keep the chuck jaws clean and free of debris. If the chuck becomes stiff, clean and lightly lubricate the threads.
• Электр текшерүү: Periodically inspect the power cord for damage. Ensure all electrical connections are secure.
• Жалпы текшерүү: Check for any loose screws, nuts, or bolts. Tighten them as necessary. Inspect the chuck guard for damage.

6. Кыйынчылыктарды

This section addresses common issues you might encounter with your pillar drill.

7. Техникалык шарттар

Detailed technical data for the GÜDE GSB 20/812 R+L Pillar Drill.

This image displays the official product information sheet for the GÜDE GSB 20/812 R+L Pillar Drill. It includes detailed technical specifications such as motor power, spindle speed, number of speeds, chuck capacity, and dimensions. The sheet also lists key features and components, providing a comprehensive overview of the drill's capabilities.

8. Кепилдик жана колдоо

For warranty claims, technical support, or spare parts, please contact your retailer or the manufacturer directly.

For more information, visit the official GÜDE webсайт: www.guede.com

Кепилдикке байланыштуу суроолор үчүн сатып алганыңыздын далилин сактап коюңуз.