1. Киришүү
Бул колдонмо коопсуз жана натыйжалуу пайдалануу үчүн маанилүү маалыматтарды камтыйт Schneider Electric XPSAC3721P XPS AC Emergency Stop Module. This device is designed for monitoring a single safety function in industrial applications.
The XPSAC3721P is a safety relay that offers an optimal solution for supervising critical safety functions such as emergency stops, safety switches, coded magnetic switches, and validation controls. It operates on a 230 V AC supply and is built to meet stringent safety standards.
Figure 1: Schneider Electric XPSAC3721P XPS AC Emergency Stop Module. This image displays the red and black safety relay, highlighting its terminal connections and the product label with specifications.
2. Орнотуу жана орнотуу
Proper installation is crucial for the safe and reliable operation of the XPSAC3721P module. Ensure all local and national electrical codes are followed.
2.1. Электрдик байланыштар
- Электр камсыздоо: Connect the 230 V AC, 50/60 Hz power supply to terminals A1 and A2. Ensure a suitable fuse is installed in the A1/A2 circuit as indicated on the device.
- Safety Inputs: Connect emergency stop buttons, safety switches, or other safety devices to the input terminals (e.g., 13, 14, 23, 24, 33, 34, Y1, Y2). Refer to the wiring diagram on the device for specific connections.
- Чыгуу байланыштары: The module provides safety output contacts (e.g., K1, K2, Y43, Y44) for controlling machinery. Connect these outputs to the control circuit of the equipment to be stopped.
- Protective Earth (PE): Ensure the protective earth terminal is properly connected to the system's ground.
2.2. Экологиялык шарттар
The module is designed to operate within an ambient temperature range of -10 °C to 55 °C. Install the device in an environment free from excessive dust, moisture, and corrosive gases.
3. Иштөө нускамалары
The XPSAC3721P module continuously monitors the state of connected safety devices. Its operation is largely automatic once correctly installed.
3.1. Power-Up and Status Indicators
- Upon power-up, the module performs a self-test.
- The A1/A2 Fuse indicator (LED) will illuminate if the power supply is present and the fuse is intact.
- The K1/K2 indicators (LEDs) provide status feedback on the internal safety relays. These LEDs will indicate the state of the safety outputs.
3.2. Safety Function Monitoring
When the connected safety devices are in a safe state (e.g., emergency stop button released, safety gate closed), the module's internal relays will energize, closing the safety output contacts (K1, K2, Y43, Y44) to allow machine operation.
In the event of a safety function activation (e.g., emergency stop pressed, safety gate opened), the module will de-energize its internal relays within a response time of 100ms, opening the safety output contacts and bringing the machine to a safe stop.
4. Техникалык тейлөө
The XPSAC3721P module is designed for minimal maintenance. However, regular inspections are recommended to ensure continued safe operation.
- Визуалдык текшерүү: Мезгил-мезгили менен модулду физикалык бузулуунун, түсүнүн өзгөрүшүнүн же бош байланыштын белгилерин текшерип туруңуз.
- Тазалоо: Модулду чаңдан жана таштандыдан таза жана таза кармаңыз. Тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Функционалдык тестирлөө: Regularly test the safety function connected to the module (e.g., activate the emergency stop) to verify that the module responds correctly and brings the machine to a safe state.
Note: Information regarding the availability of spare parts for this product is currently unavailable.
5. Кыйынчылыктарды
If the XPSAC3721P module or the connected safety circuit is not functioning as expected, follow these troubleshooting steps:
- No Power/Indicators Off:
- Check the main power supply to terminals A1 and A2.
- Verify the A1/A2 fuse. Replace if blown.
- Бардык кубат туташуулары коопсуз экенин текшериңиз.
- Safety Outputs Not Activating (K1/K2 LEDs Off when expected):
- Check the state of all connected safety input devices (e.g., emergency stop buttons, safety gates). Ensure they are in their safe, closed, or released position.
- Inspect wiring to input terminals for breaks or short circuits.
- Verify that the reset conditions (if applicable to your safety circuit design) are met.
- Safety Outputs Not Deactivating (K1/K2 LEDs On when expected to be Off):
- Check if any safety input device is stuck in an activated state.
- Inspect wiring to input terminals for unintended connections or short circuits.
- адаттан тыш жүрүм-турум:
- If the module exhibits erratic behavior, power cycle the device.
- If problems persist, contact Schneider Electric technical support.
6. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модель номери | XPSAC3721P |
| Номиналдуу камсыздооtage | 230 V AC – 15% to +10% |
| Жеткирүү жыштыгы | 50/60 Гц |
| Максималдуу энергия керектөө | 6 VA AC |
| Иштеп жаткан айлана-чөйрөнүн температурасы | -10 °Cден 55 °Cге чейин |
| Продукциянын өлчөмдөрү (L x W x Y) | 10.3 x 2.8 x 11.9 см |
| Продукт Салмагы | 0.21 кг (236 грамм) |
| Жооп убактысы | ≤ 100 мс |
| AC15-C300 Rating | Ue=230V AC / Ie=0.75A |
| DC13 Rating | Ue=24V DC / Ie=2A |
| Стандарттар | EN/IEC 60947-5-1 |
7. Кепилдик жана колдоо
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your authorized Schneider Electric distributor. Specific warranty details are not included in this manual.
For technical support, product inquiries, or service, please contact Schneider Electric customer service or visit their official website. Ensure you have your product model number (XPSAC3721P) and any relevant purchase details ready when seeking support.
Өндүрүүчү: Schneider Electric
Өндүрүүчүнүн дареги: FR 92506 Rueil Malmaison
