Metabo KGT 305 M Table and Miter Saw Instruction Manual

1. Киришүү

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Metabo KGT 305 M Table and Miter Saw. This versatile power tool is designed for precise cutting tasks, offering both miter saw and table saw functionalities. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

2. Коопсуздук нускамалары

Always observe general power tool safety guidelines and the specific warnings provided in this section. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Бардык нускамаларды окуңуз: Familiarize yourself with the controls and proper use of the saw.
• Тийиштүү жеке коргонуу каражаттарын (ЖКК) кийиңиз: Дайыма коргоочу көз айнек, угууну коргоо жана чаң маскасын тагыныңыз.
• Коопсуз жумуш аймагын камсыз кылуу: Жумуш ордун таза, жакшы жарыктандырылган жана тоскоолдуктардан алыс кармаңыз. Жарылуучу атмосферада иштебеңиз.
• Иштетилген бөлүктү бекитиңиз: Always use the material clamp to securely fasten the workpiece before cutting.
• Кокусунан баштоодон сактаныңыз: Ensure the switch is in the off position before plugging in the tool. The saw features restart protection to prevent accidental startup after a power interruption.
• Туура бутту жана тең салмактуулукту сактаңыз: аша чаап алба.
• Сакчыларды ордунда кармаңыз: Never operate the saw without all guards properly installed and functioning.
• Электр кубатын өчүрүү: Ар кандай жөндөөлөрдү жасоодон, аксессуарларды алмаштыруудан же техникалык тейлөө иштерин жүргүзүүдөн мурун ар дайым арааны сууруп алыңыз.
• Лазердик коопсуздук: This product contains a Class 2 laser. Avoid direct eye exposure to the laser beam.

3. Компоненттер жана башкаруу элементтери

Familiarize yourself with the various parts of your Metabo KGT 305 M saw before operation.

Негизги компоненттер:

• Saw Head: Contains the motor, saw blade, and blade guard. It can be tilted for bevel cuts.
• араа бычак: Carbide-tipped blade (56 teeth) for efficient cutting.
• Таблица: The main work surface, convertible between miter saw and table saw modes.
• Таблица кеңейтүүлөрү: Continuously extendable for supporting long workpieces.
• Angle Adjustment Lever/Knob: For setting precise miter and bevel angles.
• Лазердик колдонмо: Projects a line onto the workpiece for accurate cutting.
• LED иш жарык: Кесүүчү аймакты жарыктандырат.
• Материал Clamp: Secures the workpiece from above or the front.
• Параллель аялдама: Used in table saw mode for consistent rip cuts.
• Cut Stop: For precise length cuts.
• Чаң чогултуучу баштык: Иштөө учурунда жыгачтын таарындысын чогултат.
• Күйгүзүү/өчүрүү: Негизги кубаттуулукту башкаруу.

4. Орнотуу

4.1 Таңгактан чыгаруу жана текшерүү

Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during transit. Ensure all listed components are present:

• Metabo KGT 305 M Saw
• Carbide Saw Blade (56 teeth)
• 2 Integrated Table Extensions
• Параллель токтотуу
• Cut Stop
• Материал Clamp
• Chip Collection Bag
• Tool for Saw Blade Change

4.2 Араанын мизин орнотуу

1. Электр кубатын өчүрүү: Араанын электр булагынан ажыратылганын текшериңиз.
2. Raise the saw head: Lift the saw head to its highest position.
3. Open the blade guard: Follow the instructions in the tool for safely opening the blade guard.
4. Use the blade change tool: Utilize the provided tool to loosen the arbor nut while holding the arbor lock button.
5. Install the blade: Place the new carbide saw blade (56 teeth) onto the arbor, ensuring the teeth are oriented correctly for cutting (usually pointing downwards at the front of the saw).
6. Secure the blade: Tighten the arbor nut firmly with the blade change tool.
7. Close the blade guard: Ensure the guard is securely closed and functions correctly.

4.3 Аксессуарларды тиркөө

• Таблица кеңейтүүлөрү: Slide the integrated table extensions out to the desired length to support longer workpieces. They can be removed if not needed.
• Параллель аялдама: Attach the parallel stop for use in table saw mode to guide workpieces for rip cuts.
• Cut Stop: Position the cut stop for repetitive length cuts.
• Материал Clamp: Install the material clamp to securely hold workpieces during cutting operations. It can be mounted from the top or front.
• Chip Collection Bag: Attach the chip collection bag to the dust port to manage sawdust.

5. Иштөө нускамалары

The Metabo KGT 305 M offers both miter saw and table saw functionalities. Always ensure the saw is securely placed on a stable surface before operation.

5.1 Miter Saw Operation

1. Select Miter Saw Mode: Ensure the saw is configured for miter cutting.
2. Митер бурчту тууралоо: Loosen the angle adjustment lever/knob and pivot the table to the desired miter angle. Secure it firmly using the lock points for common angles.
3. Кыйшайган бурчту тууралоо: If a bevel cut is required, tilt the saw head to the left to the desired angle. The saw head has an additional angle range for undercut cuts.
4. Жумушчу бөлүгүнүн орду: Place the workpiece firmly against the fence and table. Use the material clamp аны камсыз кылуу үчүн.
5. Activate Laser Guide and LED Light: Turn on the laser for precise cut line indication and the LED work light for illumination. These are mains powered and do not require batteries.
6. Арааны баштаңыз: Press the On/Off switch. Allow the blade to reach full speed before cutting.
7. Кесүүнү аткарыңыз: Slowly lower the saw head through the workpiece. Maintain a steady, controlled motion.
8. Release and Stop: Once the cut is complete, release the switch and allow the blade to stop completely before raising the saw head.

5.2 Table Saw Operation

1. Convert to Table Saw Mode: Follow the manufacturer's instructions for quickly converting the saw from miter to table saw operation. This typically involves locking the saw head in an upward position and adjusting the table.
2. Кесүү бийиктигин тууралоо: Use the height adjustment mechanism to set the desired cutting height (0 - 50 mm).
3. Set Parallel Stop: Position the parallel stop to the desired width for rip cuts. Ensure it is securely locked.
4. Жумушчу бөлүгүнүн орду: Place the workpiece on the table, guiding it against the parallel stop.
5. Арааны баштаңыз: Press the On/Off switch. Allow the blade to reach full speed.
6. Кесүүнү аткарыңыз: Slowly and steadily feed the workpiece into the rotating blade, keeping it firmly against the parallel stop. Use a push stick for narrow cuts.
7. Stop the Saw: Once the cut is complete, release the switch and allow the blade to stop completely before removing the workpiece.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your Metabo KGT 305 M saw. Always disconnect the power supply before performing any maintenance.

• Тазалоо: Regularly clean the saw, especially the table, blade guard, and dust collection areas, to prevent sawdust buildup. Use a brush or compressed air.
• Бычак текшерүү: Periodically inspect the saw blade for sharpness, damage, or missing teeth. Replace dull or damaged blades immediately. Refer to section 4.2 for blade change instructions.
• Майлоо: Apply a light coat of machine oil to moving parts and pivot points as recommended by the manufacturer to ensure smooth operation.
• Электр зымы: Inspect the power cord for any signs of damage. Do not use the saw if the cord is damaged.
• бекиткичтер: Check all screws and fasteners regularly and tighten them if necessary.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your Metabo KGT 305 M saw.

For issues not listed here or if solutions do not resolve the problem, please contact Metabo customer service or an authorized service center.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Metabo webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Metabo Official Webсайт: www.metabo.com