Колдонмолор+

Hormann HSE4 BS

Hormann HSE4 BS Remote Control Instruction Manual

Model: HSE4 BS | Brand: Hormann

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Hormann HSE4 BS remote control. The HSE4 BS is a 4-button handheld transmitter featuring Hormann's secure BiSecur wireless technology, designed for controlling garage doors, entrance gates, and other compatible Hormann operators.

Each of the four buttons can be individually programmed to control different functions or devices, offering convenience and flexibility. The integrated keyring eyelet allows for easy attachment to your keys, ensuring it is always accessible.

Hormann HSE4 BS Remote Control, front view

Сүрөт: алдыңкы view of the Hormann HSE4 BS remote control, showing its sleek black design and four distinct control buttons.

Орнотуу жана программалоо

The Hormann HSE4 BS remote control comes with a pre-installed lithium metal battery. Before initial use, it is necessary to program the remote control to your Hormann operator or copy the code from an existing remote.

Programming to an Existing Remote Control (Hand-to-Hand Copy)

  1. Prepare the New Remote: Hold the new HSE4 BS remote control.
  2. Prepare the Existing Remote: Take your existing, working Hormann remote control.
  3. Жупташтыруу: Press and hold the desired button on your existing remote control. The LED on the existing remote will light up.
  4. Transfer Code: While still holding the button on the existing remote, immediately press and hold the corresponding button on the new HSE4 BS remote control.
  5. Ырастоо: The LED on the new HSE4 BS remote will flash slowly, then rapidly, and finally stay illuminated, indicating successful programming. Release both buttons.
  6. Сыноо функциясы: Test the newly programmed button with your operator. If it does not work, repeat the process. It may require several attempts for successful pairing.

Эскертүү: Some users report that pressing both buttons simultaneously (existing and new) without delay can improve success rates.

Programming Directly to the Operator Unit

For optimal security and functionality, or if you do not have an existing remote, it is recommended to program the HSE4 BS directly to your Hormann operator unit. The exact procedure may vary slightly depending on your specific operator model (e.g., SupraMatic, ProMatic, RotaMatic). Refer to your operator's instruction manual for precise steps. Generally, the process involves:

  1. Access Operator: Locate the programming button on your Hormann garage door or gate operator unit. This button is often labeled "P" or "PRG".
  2. Окуу режимин иштетүү: Press and release the programming button on the operator. The operator's LED indicator will typically start flashing, indicating it is in learning mode.
  3. Өткөрүү коду: Within a few seconds, press and hold the desired button on your new HSE4 BS remote control.
  4. Ырастоо: The operator's LED will change its flashing pattern or illuminate steadily to confirm successful programming. Release the button on the remote.
  5. Сыноо функциясы: Test the remote control with the operator.

Маанилүү шайкештик эскертүүсү: This remote control is compatible with Hormann operators such as SupraMatic E/P, SuperMatic HT, ProMatic, ProMatic Accu, RollMatic, RotaMatic/P/PL, RotaMatic Accu Solar, VersaMatic/P, VersaMatic Accu Solar, LineaMatic/P, and LineaMatic Accu Solar. It is ЖОК suitable for the Liftronic garage door motor.

Иштөө нускамалары

Once programmed, operating your Hormann HSE4 BS remote control is straightforward.

  1. Функцияны тандоо: Identify the button on your remote control that has been programmed for the desired function (e.g., opening/closing the garage door, opening the gate).
  2. Иштетүү: Press the corresponding button firmly for approximately one second.
  3. Байкоо: The operator will respond according to its programmed function. The remote's LED will illuminate during transmission.
Hormann HSE4 BS Remote Control buttons

Сүрөт: Жакын план view of the four control buttons on the Hormann HSE4 BS remote control, with a small LED indicator above them.

Техникалык тейлөө

The Hormann HSE4 BS remote control requires minimal maintenance to ensure long-lasting performance.

Батареяны алмаштыруу

The remote control is powered by a single lithium metal battery (CR2032 type, typically). When the battery is low, the remote's LED indicator may flash briefly or not illuminate at all when a button is pressed, or the range may decrease significantly.

  1. Ачык Casing: Алыстан башкаруу пультун c этияттык менен ачыңызasing. This usually involves prying open a small seam with a thin tool or screwdriver.
  2. Эски батареяны алып салуу: Remove the old CR2032 battery. Note its polarity (+/-).
  3. Жаңы батареяны салыңыз: Insert a new CR2032 lithium metal battery, ensuring correct polarity.
  4. Жабуу Casing: C сүрөтүн тартып алыңызasing кайра бекем бириктирилет.

Жоюу: Колдонулган батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз. Батареяларды тиричилик таштандыларына таштабаңыз.

Тазалоо

Пультту жумшак, кургак чүпүрөк менен тазалаңыз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар пульттун түзүлүшүнө зыян келтириши мүмкүн.asing and electronics.

Hormann HSE4 BS Remote Control back view моделдин номери менен

Сүрөт: Артка view of the Hormann HSE4 BS remote control, showing the model number (HSE4-868-BS) and regulatory markings.

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Remote does not operate the door/gate.
  • Not programmed correctly.
  • Батарея аз же өлүк.
  • Чектен тышкары.
  • Интерференция.
  • Repeat programming steps (see "Setup" section).
  • Replace the battery (see "Maintenance" section).
  • Move closer to the operator unit.
  • Радио тоскоолдуктарынын булактарын текшериңиз (мисалы, башка зымсыз түзмөктөр).
Алыстан башкаруудагы LED күйбөйт.Өлгөн батарея.Батареяны алмаштырыңыз.
Кыскартылган иштөө диапазону.
  • Батарея аз.
  • Айлана-чөйрөнүн кийлигишүүсү.
  • Батареяны алмаштырыңыз.
  • Ensure clear line of sight to the operator.

Техникалык шарттар

  • Модел: HSE4 BS
  • Өндүрүүчү: Хорман
  • Бөлүмдүн номери: 4511736
  • Өлчөмдөрү (L x W x Y): 11 x 6.5 x 3 см (болжол менен 4.3 x 2.6 x 1.2 дюйм)
  • Салмагы: 40 грамм (болжол менен 1.4 унция)
  • Түсү: Кара
  • Баскычтардын саны: 4
  • Байланыш технологиясы: Radio Frequency (BiSecur)
  • Кубат булагы: Батарея менен иштейт
  • Батарея түрү: 1 x Lithium metal (CR2032), included
  • Өзгөчө өзгөчөлүгү: Pre-programmed (can be reprogrammed)
  • Compatible Operators: SupraMatic E/P, SuperMatic HT, ProMatic, ProMatic Accu, RollMatic, RotaMatic/P/PL, RotaMatic Accu Solar, VersaMatic/P, VersaMatic Accu Solar, LineaMatic/P, LineaMatic Accu Solar, Hormann ProMatic Serie 4.
  • Incompatible Operators: Liftronic garage door motor.
  • Келип чыккан өлкө: Германия

Кепилдик маалымат

Based on available product information, there is no manufacturer's warranty explicitly stated for this product. Please refer to your point of purchase for any applicable retailer warranties or return policies.

Кардарларды колдоо

Should you encounter any issues not covered in this manual or require further assistance, please contact Hormann customer support or your authorized Hormann dealer. You can typically find contact information on the official Hormann webсайты же продукт сатуучу аркылуу.

When contacting support, please have your product model (HSE4 BS) and any relevant purchase details ready.

For additional resources and product information, visit the official Hormann webсайт: www.hormann.com