Salus Controls iT600 KL08RF Wireless Wiring Centre

1. Киришүү

The Salus Controls iT600 KL08RF is an 8-zone wireless wiring centre designed to simplify the installation and control of underfloor heating systems. It provides a central point for connecting thermostats, actuators, pumps, and boilers, facilitating efficient and organized heating management. This manual provides essential information for the safe and effective installation, operation, and maintenance of your KL08RF wiring centre.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Электр шок коркунучу

• Installation must be carried out by a qualified electrician in accordance with national and local wiring regulations.
• Орнотуу, техникалык тейлөө же зымдарды орнотуу иштерин жүргүзүүдөн мурун ар дайым негизги кубат булагын ажыратыңыз.
• Бардык байланыштар коопсуз жана туура изоляцияланганын текшериңиз.
• Аппаратты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
• Бул продукт ички колдонуу үчүн гана иштелип чыккан.

3. Пакеттин мазмуну

• Salus Controls KL08RF Wireless Wiring Centre
• Salus CO10RF USB Coordinator (Wireless Communication Dongle)
• Монтаждоо бурамалар жана дубал сайгычтар
• Колдонуучунун Колдонмосу (бул документ)

3.1-сүрөт: Salus Controls KL08RF Wiring Centre and USB Coordinator in Retail Packaging. This image shows the product as it appears when unboxed, including the main wiring centre unit, the separate USB coordinator, and the product's retail packaging.

4. Орнотуу жана орнотуу

4.1 Mounting the Wiring Centre

Choose a suitable location for mounting the KL08RF wiring centre, preferably near the underfloor heating manifold and away from direct heat sources or moisture. Ensure adequate space for wiring connections.

1. Mark the drilling points on the wall using the wiring centre as a template.
2. Тешиктерди бургула жана дубал тыгындарын салгыла.
3. Secure the wiring centre to the wall using the provided screws.

4.1-сүрөт: Salus Controls KL08RF Wireless Wiring Centre with Cover Closed. This image displays the wiring centre with its translucent cover securely in place, showing its compact and enclosed form factor once installed.

4.2-сүрөт: Dimensional Drawing of Salus Controls KL08RF Wiring Centre. A technical drawing illustrating the precise measurements (length: 362.0 mm, width: 85.0-93.0 mm, height: 69.3 mm) of the KL08RF unit, crucial for planning installation space.

4.2 Зымдарды туташтыруу

The KL08RF wiring centre provides connections for up to 8 heating zones, a pump, a boiler, and a dew point sensor. Refer to the detailed wiring diagram below for proper connections.

4.3-сүрөт: Salus Controls KL08RF Wireless Wiring Centre with USB Dongle. This image shows the main unit with its cover open, revealing the internal terminals for power, zones 1-8, pump, boiler, and dew point sensor connections, along with the inserted CO10RF USB coordinator.

4.4-сүрөт: Close-up of KL08RF Connections and CO10RF USB Dongle. A detailed view of the wiring terminals, including the power input (L, N), G1/G2 terminals, zone outputs (1-8), pump, boiler, and dew point sensor connections. The CO10RF USB dongle (Device ID: 001E5E09090A17E9) is clearly visible in its dedicated port.

4.5-сүрөт: Typical Wiring Diagram for Salus Controls KL08RF. An illustrative diagram showing how to connect main power (L, N), underfloor heating manifold (230V to pump, 1.5mm² cable), optional boiler connection, and a dew point sensor to the KL08RF wiring centre. It also indicates connections for various thermostat types (G1/G2) and zone actuators.

Зымдарды орнотуу кадамдары:

1. Электр камсыздоо: Connect the main 230V AC power supply to the L and N terminals marked 'Power'.
2. Zone Actuators: Connect the thermal actuators for each heating zone to the corresponding numbered terminals (1-8). Each zone typically requires two wires.
3. Насос: Connect the underfloor heating pump to the terminals marked 'Pump'.
4. Котель: Connect the boiler control wires to the terminals marked 'Boiler'. This connection typically signals the boiler to fire when heat is required.
5. Dew Point Sensor (Optional): If using, connect the dew point sensor to the designated terminals. This sensor helps prevent condensation in cooling applications.
6. Термостат байланыштары: Connect your iT600 series wireless thermostats to the system. The KL08RF communicates wirelessly with these thermostats via the CO10RF USB coordinator.

4.3 Wireless Pairing (iT600 System)

The KL08RF acts as a receiver for wireless signals from iT600 series thermostats. The CO10RF USB coordinator facilitates this communication.

1. Ensure the CO10RF USB coordinator is securely inserted into the USB port on the KL08RF.
2. Follow the pairing instructions provided with your specific iT600 thermostats to link them to the KL08RF wiring centre. This typically involves putting both devices into a pairing mode.
3. Once paired, the thermostats will wirelessly send heating demands to the KL08RF, which will then activate the corresponding zone actuators, pump, and boiler.

5. Operating the KL08RF

5.1 Индикатор жарыктары

The KL08RF features several LED indicators to provide status information:

• Power LED: Illuminates when the unit is receiving power.
• Тармактын абалы LED: Indicates the status of the wireless network (e.g., solid for connected, flashing for searching).
• Pair LED: Used during the pairing process with thermostats.
• Zone LEDs (1-8): Each LED illuminates when its corresponding zone is active and calling for heat.
• Pump LED: Illuminates when the pump output is active.
• Boiler LED: Illuminates when the boiler output is active.

5.2 Негизги операция

Once installed and paired, the KL08RF operates automatically based on the demands from the connected iT600 thermostats. When a thermostat calls for heat in a specific zone, the KL08RF will:

• Activate the actuator for that zone.
• Activate the heating pump.
• Signal the boiler to fire (if connected).

The system will continue to operate until the thermostat's setpoint is reached or the heating demand is cancelled.

6. Техникалык тейлөө

The Salus Controls KL08RF wiring centre requires minimal maintenance. Follow these guidelines:

• Зымдарды туташтыруунун коопсуздугу үчүн мезгил-мезгили менен текшерип туруңуз.
• Keep the unit clean and free from dust. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• Ensure the ventilation slots (if any) are not obstructed to prevent overheating.

7. Кыйынчылыктарды

If you experience issues with your KL08RF wiring centre, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Salus Controls technical support.

8. Техникалык шарттар

• Модель номери: 132801
• Продукт аты: KL08RF Wireless Wiring Centre
• Бренд: Salus Controls
• Аймактар: 8 (Зымсыз)
• Электр камсыздоо: 230V AC, 50Гц
• Өлчөмдөрү (L x W x Y): Approximately 362 x 93 x 69.3 mm (50 x 40 x 18 cm as per product data)
• Салмагы: Approximately 9.07 g (as per product data)
• Байланыш: Wireless (via CO10RF USB Coordinator)
• Device ID (CO10RF exampле): 001E5E09090A17E9
• Биринчи жеткиликтүү: 15-январь, 2020-жыл
• Manufacturer Discontinued: Жок

9. Кепилдик жана колдоо

9.1 Кепилдик маалыматы

The Salus Controls KL08RF Wireless Wiring Centre typically comes with a 5 жылдык кепилдик from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

9.2 Техникалык колдоо

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Salus Controls customer support. Refer to the official Salus Controls webэң заманбап байланыш маалыматы жана колдоо булактары үчүн сайт.

Webсайт: www.salus-controls.com