1. Киришүү
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Vortex HZ-LE 401 High-Efficiency Heat Pump. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.
2. Коопсуздук нускамалары
- Электр коопсуздугу: Ensure the power supply matches the pump's specifications (230V, 50-60Hz). All electrical connections must be performed by a qualified electrician and comply with local regulations. Disconnect power before any installation or maintenance.
- Суунун басымы: The pump is designed for a maximum operating pressure of PN10. Do not exceed this pressure.
- Температура: The pump is rated for a maximum fluid temperature of 110°C (tf110s1).
- Орнотуу: Install the pump in a dry, well-ventilated area, protected from freezing temperatures and direct sunlight. Ensure proper ventilation around the unit.
- Тейлөө: Бул колдонмодо сүрөттөлгөн техникалык тейлөө тапшырмаларын гана аткарыңыз. Татаал оңдоолор үчүн квалификациялуу тейлөө кызматкерлерине кайрылыңыз.
- Коргоо: The pump has an IP X4 rating, indicating protection against splashing water. However, it should not be submerged.
3. Продукциянын сүрөттөлүшү жана компоненттери
The Vortex HZ-LE 401 is a high-efficiency, electronically regulated heat pump designed for heating systems. It features low energy consumption and robust construction.
1-сүрөт: Генерал view of the Vortex HZ-LE 401 High-Efficiency Heat Pump. This image shows the compact design of the pump with its integrated control unit.
2-сүрөт: Фронт view of the Vortex HZ-LE 401 pump. The control panel with "HZ-LE LOW ENERGY VORTEX" branding is clearly visible, indicating its high-efficiency design.
3-сүрөт: Side view of the Vortex HZ-LE 401 pump. This perspective highlights the robust casing and the connection points for the heating system.
Негизги компоненттер:
- Насос корпусу: Туруктуу вasing ички компоненттерди коргоо.
- Мотор: High-efficiency, electronically regulated motor.
- Башкаруу бирдиги: Integrated electronic control for optimal performance and energy saving.
- Байланыштары: Standard DN 25/1 1/2" connections for integration into heating systems.
4. Орнотуу жана орнотуу
- Пакеттен чыгаруу: Насосту таңгагынан этияттык менен чыгарыңыз. Бузулган жерлерин текшериңиз.
- Монтаждоо абалы: Mount the pump horizontally or vertically, ensuring the motor shaft is horizontal for optimal bearing lubrication. Refer to the markings on the pump body for correct orientation.
- Түтүк байланыштары: Connect the pump to the heating system piping using appropriate fittings for DN 25/1 1/2" connections. Ensure all connections are watertight. Avoid applying excessive force to the pump housing.
- Электр байланышы:
- Ensure the main power supply is disconnected.
- Connect the pump to a 230V, 50-60Hz power supply.
- Follow local electrical codes and wiring diagrams provided with the unit (if applicable).
- Туура жерге туташтырууну камсыз кылуу.
- Системаны толтуруу: After installation, fill the heating system with water and bleed any air from the system, including the pump.
- Алгачкы ишке киргизүү: Restore power. The pump will perform a self-test. Observe for any unusual noises or leaks.
5. Иштөө нускамалары
The Vortex HZ-LE 401 pump is electronically regulated and designed for automatic operation. Once installed and powered, it will typically adjust its performance based on system requirements to maintain optimal efficiency.
Control Panel (Refer to Figure 2):
- Дисплей: Shows current operating status, power consumption, or error codes.
- Баскычтар: Used to cycle through operating modes or adjust settings (specific functions may vary by model variant; consult detailed product documentation for advanced settings).
- LED көрсөткүчтөрү: Provide visual feedback on pump status (e.g., power on, error, operating mode).
For specific operating modes and advanced settings, please refer to the detailed technical documentation provided with your pump or available on the manufacturer's webсайт.
6. Техникалык тейлөө
The Vortex HZ-LE 401 is designed for minimal maintenance. However, periodic checks are recommended to ensure long-term reliability.
- Жылдык текшерүү: Visually inspect the pump and connections for any signs of leaks, corrosion, or damage.
- Системанын суусунун сапаты: Ensure the heating system water quality is maintained according to manufacturer recommendations to prevent scale buildup and corrosion.
- Тазалоо: Keep the exterior of the pump clean and free from dust and debris to ensure proper heat dissipation. Do not use abrasive cleaners.
- Аба кандуу: Periodically check and bleed air from the heating system to prevent cavitation and ensure efficient operation.
Маанилүү: Кандайдыр бир тейлөө же тазалоо иштерин аткаруудан мурун ар дайым кубат менен камсыздоону ажыратыңыз.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебей жатат | No power supply; Air in pump; Motor jammed | Check power connection and circuit breaker; Bleed air from the system; Contact service if motor is jammed. |
| Insufficient flow/heating | Air in system; Incorrect operating mode; Blockage in piping | Bleed air from the system; Check pump settings; Inspect piping for obstructions. |
| адаттан тыш ызы-чуу/титирөө | Air in pump; Loose mounting; Foreign object in pump | Bleed air from the pump; Check mounting bolts; Disconnect power and inspect impeller (if accessible and safe). |
| агып кетүү | Бошоң туташуулар; Бузулган пломбалар | Tighten pipe connections; Contact service for seal replacement. |
Бул чечимдерди колдонуу аракетинен кийин маселе чечилбесе, квалификациялуу тейлөө кызматкерлерине кайрылыңыз.
8. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модел | HZ-LE 401 |
| Бренд | Vortex |
| Тtage | 230 V |
| Жыштык | 50 – 60 Гц |
| Энергияны керектөө | 4 – 23 Вт |
| Энергия натыйжалуулугунун индекси (EEI) | <0.19 (part 2) |
| Кирүү коргоо (IP) рейтинги | IP X4 |
| Nominal Pressure (PN) | PN10 |
| Суюктуктун максималдуу температурасы | 110°C (tf110s1) |
| Туташуу өлчөмү | DN 25/1 1/2" |
| ASIN | B01LZUSZV2 |
9. Кепилдик жана колдоо
Specific warranty information for the Vortex HZ-LE 401 High-Efficiency Heat Pump is not provided in this document. Please refer to the warranty card included with your product or contact your retailer or the manufacturer directly for details regarding warranty coverage and terms.
For technical support, spare parts, or service inquiries, please contact Vortex customer service or an authorized service partner. Contact information can typically be found on the manufacturer's official webсайтында же продуктунун таңгагында.
