Introduction
This manual provides comprehensive instructions for the safe and effective use of your Bytech Universal Car Mount. Designed for convenience and stability, this mount securely holds your smartphone in your vehicle, allowing for hands-free navigation and communication. Please read this manual thoroughly before installation and use.
Коопсуздук маалыматы
Always prioritize safe driving. Do not adjust the mount or your device while driving. Ensure the mount is securely installed and does not obstruct your view of the road, airbags, or vehicle controls. Avoid placing the mount in direct sunlight for extended periods, as this may affect its material integrity or the device mounted.
Жайгашуу
1. Орнотуу ордун тандоо
Select a flat, clean, and smooth surface on your windshield or dashboard. Ensure the chosen location does not interfere with your driving visibility, vehicle controls, or airbag deployment. Clean the surface thoroughly before installation.
2. Attaching the Mount
- Сорох чөйчөктү тандалган бетке бекем басыңыз.
- Flip the lever on the base of the suction cup down to create a vacuum seal, securing the mount in place.
- Verify the mount is stable and does not wobble.
3. Adjusting the Mount Angle
Loosen the adjustment knob located on the arm of the mount. Position the arm and cradle to your desired viewing angle. Tighten the knob firmly to lock the angle in place.
Image: The Bytech Universal Car Mount, showcasing its suction cup base, adjustable arm, and spring-loaded phone cradle with red gripping pads. This image illustrates the overall design and components of the mount.
Иштеп жатат
1. Смартфонуңузду киргизүү
Пружиналуу клапанды акырын ажыратыңызamps of the cradle. Carefully place your smartphone into the cradle, ensuring it is centered and held securely by the clamps. The red gripping pads provide a firm hold without scratching your device.
2. Removing Your Smartphone
To remove your smartphone, gently pull apart the spring-loaded clamps and lift your device out of the cradle.
Техникалык тейлөө
Тазалоо
To clean the mount, wipe it with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the materials. For the suction cup, periodically clean it with warm, soapy water and let it air dry to maintain its adhesive properties.
Сактагыч
When not in use for extended periods, detach the mount from the surface and store it in a cool, dry place away from direct sunlight.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Mount not sticking to surface. | Surface is dirty, uneven, or suction cup is dirty/damaged. | Clean the surface and the suction cup. Ensure the surface is flat. If damaged, replace the mount. |
| Телефон бекем кармалган эмес. | Phone is too large/small for the cradle, or clamps are worn. | Ensure your phone fits within the cradle's dimensions. If clamps are worn, the mount may need replacement. |
| Mount wobbles after installation. | Adjustment knob is loose, or suction cup is not fully sealed. | Tighten the adjustment knob. Re-attach the suction cup, ensuring the lever is fully engaged. |
Техникалык шарттар
- Модел: BYMOMO102BK
- Бренд: Bytech
- Продукциянын өлчөмдөрү: 1 x 1 x 1 дюйм (болжол менен)
- Элемент Салмагы: 2.1 унция
- Түсү: Кара
- Өзгөчөлүктөр: Жөнгө салынуучу
- Шайкеш түзмөктөр: Смартфондор
- Монтаж түрү: Vehicle Mount (Suction Cup)
- Келип чыккан өлкө: Кытай
Кепилдик жана колдоо
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Bytech webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
