1. Продукт бүтүп калдыview
The McCulloch CS 50S is a robust and lightweight gasoline chainsaw designed for demanding sawing tasks. It features a powerful 2100 W OxyPower engine, which provides efficient performance with reduced emissions and lower fuel consumption. The chainsaw is equipped with a 45 cm guide bar.
Key features include a Soft Start system for easy starting, a primer, and a combined Start/Stop switch for simplified operation. The integrated anti-vibration system and felling marks on the handle contribute to fatigue-free and precise work. Additionally, the durable CCS air filtration system purifies intake air, enhancing engine power and further reducing fuel consumption.
Сүрөт 1.1: Алдыңкы view of the McCulloch CS 50S Chainsaw, showcasing the guide bar and chain.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Бул электр куралы менен берилген бардык коопсуздук эскертүүлөрүн, нускамаларды, иллюстрацияларды жана спецификацияларды окуңуз. Төмөндө саналып өткөн бардык көрсөтмөлөрдү аткарбоо электр шокуна, өрткө жана/же олуттуу жаракатка алып келиши мүмкүн.
2.1 Жеке коргонуу каражаттары (ЖКК)
- Башты коргоо: Always wear a safety helmet.
- Көздү коргоо: Коопсуздук көз айнегин же бет калканын колдонуңуз.
- Угуу коргоо: Кулак коргоочуларын же кулак тыгындарын тагыныңыз.
- Колду коргоо: Бекем жумушчу колкаптарды кийиңиз.
- Бутту коргоо: Use chainsaw protective trousers.
- Бутту коргоо: Болот тумшуктары жана тайгаланбаган таманы бар коопсуздук бут кийимдерин кийгиле.
2.2 Жалпы коопсуздук чаралары
- Чынжырлуу арааны эч качан бир кол менен иштетпеңиз.
- Багыттоочу тилкенин учундагы кыймылдуу чынжыр бир нерсеге тийгенде же жыгач жабылып, кесилген араа чынжырын чымчып алганда пайда болушу мүмкүн болгон артка соккудан кабардар болуңуз.
- Ensure stable footing and balance before and during operation.
- Keep bystanders, children, and animals at least 10 meters (33 feet) away from the work area.
- Handle fuel with extreme care. Fuel is highly flammable.
- Do not operate the chainsaw in poor weather conditions, especially when there is a risk of lightning.
- Inspect the chainsaw before each use for damaged parts, loose fasteners, or fuel leaks.
3. Компоненттери жана өзгөчөлүктөрү
Familiarize yourself with the main components of your McCulloch CS 50S chainsaw:
- Мотор: 2100 W OxyPower engine for powerful and efficient cutting.
- Гид тилкеси: 45 cm (18 inch) guide bar, providing a substantial cutting length.
- Араа чынжыр: Designed for optimal cutting performance and durability.
- Soft Start System: Reduces resistance in the starter cord for easier starting.
- Праймер лампасы: Pumps fuel to the carburetor for quick starts.
- Combined Start/Stop Switch: Simplifies the starting and stopping procedure.
- Вибрацияга каршы системасы: Isolates the handles from the engine to reduce vibration and user fatigue.
- CCS Air Filtration System: Cleans intake air before it reaches the carburetor, improving engine performance and fuel efficiency.
- чынжыр тормоз: Safety feature that stops the chain instantly in case of kickback.
- Алдыңкы туткасы: For stable grip and control during operation.
- Арткы туткасы: Contains the throttle trigger and controls.
- Күйүүчү май багы: For gasoline mixture.
- Чынжырлуу май куюучу цистерна: For lubricating the chain and guide bar.
3.1-сүрөт: Каптал view of the McCulloch CS 50S Chainsaw, showing the engine housing and handles.
4. Орнотуу
4.1 Таңгактан чыгаруу жана текшерүү
Carefully remove all components from the packaging. Inspect the chainsaw for any signs of damage during transit. Ensure all parts listed in the manual are present.
4.2 Guide Bar and Chain Assembly
- Place the guide bar onto the guide bar studs.
- Carefully loop the saw chain around the drive sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing the correct direction (refer to the arrow on the guide bar).
- Install the clutch cover and tighten the nuts finger-tight.
- Adjust chain tension using the tensioning screw. The chain should be snug against the guide bar but still able to be pulled freely by hand.
- Once tension is set, fully tighten the clutch cover nuts.
4.3 Fuel and Chain Oil
The McCulloch CS 50S uses a two-stroke engine that requires a mixture of unleaded gasoline and two-stroke engine oil. Always use high-quality two-stroke oil specifically designed for air-cooled engines.
- Күйүүчү май аралашмасы: Refer to the engine oil manufacturer's instructions, typically 50:1 (2% oil) or 25:1 (4% oil). Always mix fuel in a separate, approved container.
- чынжыр майы: Use a high-quality chain lubricant specifically designed for chainsaws. Never use waste oil or motor oil.
4.4 Filling Tanks
- Ensure the chainsaw is on a level surface and the engine is cool.
- Clean the area around the fuel and oil caps to prevent dirt from entering the tanks.
- Carefully open the caps and fill the fuel tank with the prepared fuel mixture and the chain oil tank with chain lubricant.
- Do not overfill. Leave a small air gap.
- Securely close both caps.
4.1-сүрөт: Жогорку view of the McCulloch CS 50S Chainsaw, showing the fuel and oil caps.
5. Иштөө нускамалары
5.1 Моторду ишке киргизүү
Муздак баштоо:
- Чынжыр тормозун иштетиңиз.
- Лампанын ичинде күйүүчү май көрүнгөнгө чейин, праймерди бир нече жолу басыңыз.
- Set the combined Start/Stop switch to the choke position.
- Pull the starter cord slowly until resistance is felt, then pull quickly and firmly until the engine fires (usually a few pulls).
- Once the engine fires, immediately push the Start/Stop switch to the half-throttle position.
- Кыймылдаткыч иштеп, иштегенге чейин стартер шнурун кайра тартыңыз.
- Disengage the chain brake and allow the engine to warm up for a few moments before beginning work.
Жылуу баштоо:
- Чынжыр тормозун иштетиңиз.
- Set the combined Start/Stop switch to the run position.
- Мотор ишке киргенче стартердин шнурун тартыңыз.
5.2 Кесүү техникасы
Always maintain a firm grip on both handles. Ensure the chain brake is disengaged before cutting.
- Букинг: Cutting a felled tree into logs. Always support the log to prevent pinching the guide bar.
- Аяктоо: Removing branches from a felled tree. Work from the base of the tree towards the top, cutting smaller branches first.
- Кыюу: Cutting down a standing tree. This is an advanced technique and should only be performed by experienced operators. Always plan your escape route and be aware of the tree's lean.
Figure 5.1: Operator using the McCulloch CS 50S Chainsaw to cut a log on a sawhorse, demonstrating proper technique and safety gear.
5.2-сүрөт: Башка view of the McCulloch CS 50S Chainsaw in use, showing the sawdust being expelled during cutting.
Figure 5.3: Close-up of an operator wearing full protective gear, including a helmet with face shield, while using the McCulloch CS 50S Chainsaw to cut wood.
6. Техникалык тейлөө
Үзгүлтүксүз тейлөө чынжырчаңыздын узак мөөнөттүү жана коопсуз иштешин камсыз кылат.
6.1 Күнүмдүк текшерүүлөр
- Check chain tension: Adjust if necessary.
- Check chain oil level: Refill before each use.
- Check fuel level: Refill as needed.
- Чынжырдын курчтугун жана бузулгандыгын текшериңиз.
- Check the chain brake for proper function.
6.2 Тазалоо
- Аба чыпкасы: Regularly clean the air filter, especially after dusty operations. Remove the filter and clean it with warm soapy water, then allow it to dry completely before reinstallation.
- Муздатуу канаттары: Keep the engine's cooling fins free of sawdust and debris to prevent overheating.
- Guide Bar Groove: Clean the groove of the guide bar to ensure proper chain lubrication and movement.
6.3 Чынжырды курчутуу
A sharp chain is crucial for safe and efficient cutting. Sharpen the chain regularly using a round file of the correct diameter (refer to chain specifications) and a flat file for depth gauges. If unsure, have the chain sharpened by a professional.
6.4 Учкунды текшерүү
Inspect the spark plug periodically. Clean or replace it if it's fouled or worn. Ensure the correct gap is maintained.
6.5 Сактоо
For long-term storage, drain the fuel tank and run the engine until it stops to clear the carburetor. Drain the chain oil tank. Clean the chainsaw thoroughly and store it in a dry, secure place away from children.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мотор иштебейт | No fuel; incorrect starting procedure; fouled spark plug; clogged fuel filter | Fill fuel tank; follow cold/warm start procedure; clean/replace spark plug; clean/replace fuel filter |
| Чынжырлуу араа начар кесет | Dull chain; incorrect chain tension; worn guide bar | Sharpen chain; adjust chain tension; replace guide bar |
| Чынжыр майы агып жаткан жок | Empty oil tank; clogged oil outlet; damaged oil pump | Fill oil tank; clean oil outlet; contact service for oil pump repair |
| Ашыкча термелүү | Loose components; damaged chain/guide bar; engine issue | Check all fasteners; inspect/replace chain/guide bar; contact service for engine inspection |
8. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Өндүрүүчү | Gardena Deutschland GmbH - DE Parent |
| Модель номери | GM967300301 |
| Продукциянын өлчөмдөрү (L x W x Y) | 50 x 29 x 31.5 см |
| Салмагы | 6 кг (13.23 фунт) |
| Күч | 2100 Ватт |
| Мотор түрү | Fuel-powered (Gasoline) |
| Гид тилкесинин узундугу | 45 см |
| Материал | Пластик |
| Камтылган компоненттер | чынжыр |
9. Кепилдик жана колдоо
For warranty information and technical support, please refer to the official McCulloch website or contact an authorized McCulloch service center. Keep your proof of purchase for any warranty claims.
Please note that specific spare parts availability information was not provided in the product data. For spare parts inquiries, it is recommended to contact McCulloch or Gardena Deutschland GmbH directly.
Кошумча жардам алуу үчүн, сиз иш сапары менен болот McCulloch official webсайт.
