Rosewill CULLINAN MX-Blue ATX Mid Tower Gaming PC Computer Case

1. Бүттүview

The Rosewill CULLINAN MX-Blue is an ATX Mid Tower gaming PC computer case designed for optimal airflow and component visibility. It features three sides of tempered glass, pre-installed blue LED fans, and extensive support for liquid cooling radiators. This manual provides detailed instructions for setting up, operating, and maintaining your computer case.

Figure 1: Rosewill CULLINAN MX-Blue ATX Mid Tower Gaming PC Computer Case.

2. Өзгөчөлүктөрү

• Tempered Glass Design: Features 3 sides of sleek and sturdy tempered glass on the front and both sides to showcase hardware and internal components.
• Оптималдуу муздатуу: Excellent airflow from 4 pre-installed 120mm blue LED cooling fans (3 front, 1 rear). Supports up to 2 additional 140mm fans on top or 6 total 120mm case fans.
• Радиатор колдоо: Optional 360mm radiator liquid cooling support in the front and 280mm radiator clearance on top.
• PSU капкагы: Customizable and ventilated PSU shroud basement supports 3 x 80mm fans to promote heat dissipation.
• Component Clearance: Supports up to 170mm tall CPU cooler and up to 360mm long VGA card.
• Чаң чыпкалары: Includes top and bottom dust filters for easy maintenance.

Figure 2: Optimized cooling diagram illustrating airflow paths within the case.

3. Техникалык шарттар

Figure 3: Case dimensions (Height: 482mm/19in, Width: 225mm/8.86in, Depth: 429mm/16.91in).

4. Орнотуу

Follow these steps to set up your Rosewill CULLINAN MX-Blue PC case and install your components:

1. Пакеттен чыгаруу жана текшерүү: Carefully remove the case from its packaging. Inspect for any damage during shipping.
2. Каптал панелдерин алып салуу: Unscrew the large, thick screws on the tempered glass side panels and carefully remove them. Place them on a soft, flat surface to prevent scratches.
3. Remove Front Panel (for cleaning/access): The front tempered glass panel can be removed by pulling it firmly from the bottom edge. There is a small gap at the bottom to insert your fingers. This provides access to the front dust filter and pre-installed fans.

Сүрөт 4: Алдыңкы жана арткы views of the case, showing panel access points.
4. Motherboard орнотуу: Install the necessary standoffs for your motherboard size (Micro ATX, ATX, Mini-ITX). Carefully place your motherboard into the case and secure it with screws.
5. Сактагыч дисктерди орнотуу:
   • 3.5 дюймдук катуу дисктер үчүн: Utilize the pull-out trays located in the PSU shroud basement.
   • 2.5 дюймдук SSD дисктери үчүн: Mount them in the dedicated slots on the back of the motherboard tray.
6. Электр булагы (PSU) орнотуу: Install your power supply unit in the dedicated compartment at the bottom rear of the case. Ensure proper orientation for airflow.
7. Install Expansion Cards (GPU, etc.): Remove the necessary expansion slot covers and install your graphics card or other PCIe cards. Secure them with screws.
8. Кабелдик башкаруу: колдонуу ample space behind the motherboard tray and the various cutouts for efficient cable routing. This helps improve airflow and aesthetics.


Сүрөт 5: Арткы интерьер view highlighting cable management options.

9. Алдыңкы I/O кабелдерин туташтыруу: Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power, Reset, LED) to their corresponding headers on your motherboard. Note: Ensure your motherboard has an on-board USB 3.0 socket.
10. Панелдерди кайра бекитүү: Once all components are installed and cables are managed, carefully reattach the front and side tempered glass panels.

5. Иштөө

The Rosewill CULLINAN MX-Blue case provides convenient front I/O ports for easy access and control.

Figure 6: Top I/O panel with labeled ports and controls.

• Кубат баскычы: Press to turn on or off your computer.
• Калыбына келтирүү баскычы: Press to restart your computer.
• USB 3.0 порттору (x2): шайкеш түзмөктөр менен жогорку ылдамдыктагы маалыматтарды берүү үчүн.
• USB 2.0 порттору (x2): Стандарттык USB түзмөктөр үчүн.
• HD Audio In/Out: Connect your headphones and microphone.
• Желдетүүчү ылдамдыкты көзөмөлдөө: Use the fan speed switch (labeled L-S-H) to adjust the speed of the pre-installed fans. 'L' for Low, 'S' for Standard, 'H' for High. This also controls the fan LED lights.

6. Техникалык тейлөө

Үзгүлтүксүз тейлөө сиздин PC компоненттеринин оптималдуу иштешин жана узак иштөөсүн камсыз кылууга жардам берет.

• Чаң чыпкасын тазалоо: The case is equipped with magnetic dust filters on the top and bottom, and a removable filter behind the front panel. Regularly remove and clean these filters to prevent dust buildup inside the case.
  • Top and Bottom Filters: Easily slide out for cleaning.
  • Алдыңкы чыпка: Remove the front tempered glass panel (as described in Setup section 4.3) to access the magnetic front filter.
• Температуралуу айнек тазалоо: Use a soft, lint-free cloth and a non-abrasive glass cleaner to clean the tempered glass panels. Avoid harsh chemicals that may damage the surface.
• Ички тазалоо: Periodically use compressed air to blow out dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.

7. Кыйынчылыктарды

If you encounter issues with your Rosewill CULLINAN MX-Blue case, consider the following common troubleshooting steps:

• Fans Not Spinning / LEDs Off:
  • Check the fan speed control switch on the top I/O panel. Ensure it is not set to 'L' (Low) if you expect full speed or 'S' (Standard) if you expect LEDs to be on (some modes might turn off LEDs).
  • Verify that the pre-installed fans are correctly connected to the fan hub/controller inside the case, and that the fan hub is powered and connected to the motherboard.
• Алдыңкы USB порттору иштебейт:
  • Ensure the USB 3.0 and USB 2.0 headers from the front panel are securely connected to the correct ports on your motherboard.
  • Check your motherboard's manual for the correct header locations and ensure your motherboard supports the necessary USB 3.0 socket.
• No Power / System Not Booting:
  • Verify that the power button cable from the front panel is correctly connected to the "Power SW" pins on your motherboard's front panel header.
  • Ensure your Power Supply Unit (PSU) is properly installed, connected to all components, and switched on.
  • Confirm all internal components (motherboard, CPU, GPU, RAM) are correctly seated and powered.

For more complex issues, consult your motherboard and component manuals, or contact Rosewill customer support.

8. Кепилдик жана колдоо

For detailed warranty information and technical support, please refer to the official Rosewill resources:

• Расмий колдонуучу колдонмо (PDF): For comprehensive instructions and diagrams, you can download the official PDF user manual бул жерде.
• Rosewill Support: Расмий Rosewill сайтына баш багыңыз website or their Amazon store for product support, FAQs, and contact information: Amazon'догу Rosewill дүкөнү.