1. Киришүү
This manual provides essential information for the safe installation, operation, and maintenance of the BRYANT BD20/20 20A 120/240V 2P 10K Circuit Breaker. This device is designed to protect electrical circuits from overcurrent conditions, such as overloads and short circuits, by automatically interrupting the flow of electricity. Please read this manual thoroughly before installation or use to ensure proper function and safety.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Электр шок коркунучу. Бул автоматтык өчүргүчтү орнотуу жана тейлөө квалификациялуу кызматкерлер тарабынан гана аткарылышы керек. Электр чынжырларында иштөөдөн мурун ар дайым негизги тейлөө панелинен электр кубатын өчүрүңүз.
- Орнотуу учурунда бардык жергиликтүү жана улуттук электр коддору сакталганын текшериңиз.
- Томду ырастаңызtage and current ratings of the circuit breaker match the requirements of the electrical system.
- Do not install or operate the circuit breaker if it appears damaged.
- Тиешелүү жеке коргонуу шаймандарын (ЖКК), анын ичинде изоляцияланган колкаптарды жана коргоочу көз айнектерди колдонуңуз.
- Эч качан айланып өтпөңүз жеampавтоматтык өчүргүчтүн коргоо механизмдери менен.
3. Продукт бүтүп калдыview
The BRYANT BD20/20 is a 2-pole, 20-amp circuit breaker designed for 120/240V applications. It features a 10,000 Ampere Interrupting Capacity (AIC), indicating its ability to safely interrupt high fault currents. The breaker is designed for plug-in mounting in compatible load centers.
This image displays the front of the BRYANT BD20/20 circuit breaker. It clearly shows the two red toggle switches, labeled "ON" and "OFF" for each pole. The brand "BRYANT" and model "BD20-20" are visible, along with "CU-AL SWD" indicating compatibility with copper and aluminum wiring. The UL listing information is also present at the top.
This image shows the bottom side of the BRYANT BD20/20 circuit breaker. Visible markings include "USE ONLY IN LISTED ENCLOSURE", "40 C CPL 60/75 C WIRE", and several patent numbers. The text "MADE IN U.S.A." is also clearly visible, indicating the country of manufacture.
This image displays the top side of the BRYANT BD20/20 circuit breaker. Key information includes the "TORQUE" specifications for wire connections: 14-10 AWG 20 IN.LBS., 8 AWG 25 IN.LBS., and 6-4 AWG 27 IN.LBS. The "CURRENT INTERRUPTING RATING" is also shown as "MAX. RMS SYM. AMPERES 10,000 AT 120/240 VOLTS AC".
4. Орнотуу жана орнотуу
МААНИЛҮҮ: Ensure all power to the electrical panel is OFF before proceeding with installation. Use a voltage tester to confirm the absence of power.
- Электр энергиясын өчүрүү: Locate the main service panel and turn off the main breaker to completely de-energize the panel.
- Панелге кирүү: Carefully remove the cover of the electrical panel to expose the bus bar and wiring.
- Бөлгүчтүн жайгашуусу: Identify an available slot on the bus bar that is compatible with the BD20/20's plug-in design.
- Орнотуу: Align the circuit breaker with the bus bar and firmly push it into place until it clicks securely. Ensure both poles are properly seated.
- Зымдар: Connect the circuit wires to the appropriate terminals on the circuit breaker. For the BD20/20, connect the two hot wires to the respective screw terminals. Refer to Figure 3.3 for recommended torque specifications for wire gauges (14-10 AWG: 20 in-lbs, 8 AWG: 25 in-lbs, 6-4 AWG: 27 in-lbs).
- Коопсуз байланыштар: Tighten the terminal screws to the specified torque to ensure a secure and safe electrical connection.
- Панелди кайра чогултуу: Replace the electrical panel cover, ensuring all screws are tightened.
- Электр энергиясын калыбына келтирүү: Turn the main breaker back ON at the service panel.
- Сыноо: Test the circuit protected by the newly installed breaker to confirm proper operation.
5. Иштөө нускамалары
The BRYANT BD20/20 circuit breaker operates with simple ON/OFF toggles. When the circuit breaker trips due to an overload or short circuit, the toggle will move to a central or "tripped" position, typically between ON and OFF.
- Күйгүзүү: Push the red toggle(s) firmly to the "ON" position.
- Өчүрүү: Push the red toggle(s) firmly to the "OFF" position.
- To Reset a Tripped Breaker: First, push the toggle(s) completely to the "OFF" position. Then, push the toggle(s) firmly to the "ON" position. If the breaker immediately trips again, there may be a persistent fault in the circuit that requires professional attention.
6. Техникалык тейлөө
Circuit breakers like the BRYANT BD20/20 are generally maintenance-free. However, periodic visual inspection is recommended.
- Жылдык текшерүү: Annually, or as required by local codes, have a qualified electrician inspect the circuit breaker and its connections for any signs of wear, corrosion, or overheating (discoloration).
- Тазалоо: Ensure the area around the circuit breaker within the panel is free from dust and debris. Do not use liquids for cleaning inside the electrical panel.
- Сыноо: While not typically required for residential breakers, some commercial or industrial applications may require periodic testing by a qualified professional.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Брейдер тез-тез сапарга чыгат. | Ашыкча жүктөлгөн чынжыр, кыска туташуу же жерге туташуу. | Контурдагы жүктү азайтыңыз. Приборлорду розеткадан ажыратыңыз. Зымдардын бузулганын текшериңиз. Эгер көйгөй чечилбесе, квалификациялуу электрикке кайрылыңыз. |
| Breaker баштапкы абалга келтирилбейт. | Persistent fault (short circuit/ground fault) or internal breaker damage. | Ensure the toggle is pushed fully to "OFF" before attempting to reset to "ON". If it still won't reset, do not force it. Call a qualified electrician. |
| Орнотуудан кийин электр кубаты жок. | Breaker not fully seated, loose wiring connections, or main power off. | Verify main breaker is ON. Ensure the BD20/20 is fully seated on the bus bar. Check wire connections for tightness (with power OFF). |
If you are unable to resolve an issue, or if you suspect a serious electrical problem, always contact a qualified and licensed electrician.
8. Техникалык шарттар
| Атрибут | Нарк |
|---|---|
| Модель номери | BD20/20 |
| Бренд | Брайант |
| Учурдагы рейтинг | 20 Amps |
| Тtage Рейтинг | 120/240V AC |
| Поляктардын саны | 2 |
| Interrupting Capacity (AIC) | 10,000 Amperes |
| Монтаж түрү | Plug-In Mount |
| Ажыраткычтын түрү | Стандарт |
| Продукциянын өлчөмдөрү | 3 x 1 x 3 дюйм |
| Салмагы | 5.86 унция |
9. Кепилдик жана колдоо
Specific warranty information for the BRYANT BD20/20 circuit breaker is typically provided by the manufacturer or the point of purchase. Please refer to the documentation included with your purchase or contact Bryant customer support for details regarding warranty coverage and terms.
For technical support or inquiries, please contact Bryant customer service or a certified electrician.
