1. Продукт бүтүп калдыview
The SHIMANO Dura-Ace ST-9150 Di2 Shift/Brake Lever is designed for road cycling, offering precise electronic shifting and reliable braking performance. This component integrates the electronic shifting buttons and hydraulic brake lever into a single ergonomic unit, optimized for comfortable hand positioning and efficient control during rides.
Сүрөт 1: Алдыңкы view of the SHIMANO Dura-Ace ST-9150 Di2 Shift/Brake Lever, showcasing its ergonomic design and integrated electronic shifting buttons.
2. Орнотуу жана орнотуу
Proper installation is crucial for the safe and optimal performance of your SHIMANO Dura-Ace ST-9150 Di2 Shift/Brake Lever. It is recommended that installation be performed by a qualified bicycle mechanic.
2.1 Mounting to Handlebars
- Position the lever on the handlebar, ensuring it is at the desired angle for comfortable reach and control.
- Рулду clamp bolt to the manufacturer's specified torque using a torque wrench. Overtightening can damage the handlebar or lever body.
2.2 Di2 Electrical Connection
- Connect the Di2 E-Tube wire from the lever to the appropriate port on the Di2 junction box. Ensure the connection is secure and fully inserted.
- Route the E-Tube wire neatly along the handlebar and frame, securing it with cable ties or internal routing as appropriate.
2.3 Brake System Connection
- For hydraulic brake systems, connect the hydraulic brake hose to the lever body according to SHIMANO's hydraulic brake installation instructions. Bleed the brake system thoroughly to remove any air.
- For mechanical brake systems, route the brake cable through the lever and connect it to the brake caliper, adjusting tension as needed.
2-сүрөт: View of the lever hoods, which provide grip and cover the internal components.
3. Иштөө нускамалары
3.1 Shifting Operation
- Up-Shift: Press the upper button on the lever body to shift to a larger gear (harder pedaling).
- Down-Shift: Press the lower button on the lever body to shift to a smaller gear (easier pedaling).
- Multi-Shift: The Di2 system allows for continuous shifting by holding down a shift button. This function can be customized via the E-Tube Project software.
3.2 Braking Operation
- Pull the brake lever towards the handlebar to engage the brake. Apply pressure smoothly and progressively for controlled deceleration.
- Ensure brake pads are properly aligned and make full contact with the rim or rotor.
3.3 Reach Adjustment
The lever features a reach adjustment mechanism to customize the distance from the handlebar to the lever blade. This allows riders to fine-tune the lever position for optimal comfort and control. Refer to the detailed SHIMANO technical documentation for specific adjustment procedures.
4. Техникалык тейлөө
Regular maintenance ensures the longevity and reliable performance of your shift/brake lever.
- Тазалоо: Regularly clean the lever body and hoods with a mild soap and water solution. Avoid harsh chemicals that may damage the materials.
- Brake System Check: Periodically inspect brake cables/hoses for wear, fraying, or leaks. Ensure brake fluid levels are adequate for hydraulic systems.
- Di2 System Check: Ensure all E-Tube connections are secure. Check the Di2 battery charge level regularly. Update firmware using the SHIMANO E-Tube Project software as recommended.
- Lever Pivot Points: Keep pivot points clean and free of debris. Lubricate sparingly with a light lubricant if necessary, avoiding contact with braking surfaces.
5. Кыйынчылыктарды
Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Shifting is unresponsive or inconsistent. | Low Di2 battery, loose E-Tube connection, firmware issue, derailleur adjustment. | Charge Di2 battery. Check all E-Tube connections. Update firmware. Adjust front/rear derailleur. |
| Brake lever feels spongy or lacks power. | Air in hydraulic system (hydraulic brakes), worn brake pads, stretched cable (mechanical brakes). | Bleed hydraulic brake system. Replace worn brake pads. Replace brake cable and adjust tension. |
| Lever reach adjustment not working. | Adjustment screw seized or damaged. | Inspect adjustment screw for debris or damage. Apply a small amount of lubricant. If damaged, seek professional service. |
6. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | СТ-9150 |
| Сериялар | Dura-Ace Di2 |
| Material (Hood) | Көмүртек композит |
| Material (Handle) | Көмүртек |
| Активдүүлүк | Road Cycling |
| Жөнгө салуу мүмкүнчүлүгү | Reach Adjust Range |
| Колдун багыты | Солго |
| Түс | Кара |
| Буюмдун болжолдуу салмагы | 250г (8.8 унция) |
| Продукциянын өлчөмдөрү | 8 x 7 x 3 дюйм |
7. Кепилдик маалыматы
The SHIMANO Dura-Ace ST-9150 Di2 Shift/Brake Lever is covered by a limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official SHIMANO warranty policy document available on the SHIMANO website or contact your authorized SHIMANO dealer. Keep your proof of purchase for warranty claims.
8. Колдоо
For further assistance, technical support, or service inquiries regarding your SHIMANO Dura-Ace ST-9150 Di2 Shift/Brake Lever, please contact SHIMANO customer service or visit the official SHIMANO website. You can also consult your local authorized SHIMANO dealer for professional advice and service.
- SHIMANO Official Webсайт: www.shimano.com
- Дилердин локатору: Use the dealer locator tool on the SHIMANO webжакын жердеги ыйгарым укуктуу тейлөө борборун табуу үчүн сайтты ачыңыз.
