1. Киришүү
This manual provides essential instructions for the installation, operation, maintenance, and troubleshooting of your APC Smart-UPS SRT 5000VA 208V. Please read this manual thoroughly before attempting to install or operate the UPS. Retain this manual for future reference.
The APC Smart-UPS SRT 5000VA 208V is an Uninterruptible Power Supply (UPS) designed to provide protected power to electronic equipment. It safeguards connected equipment from power outages, sags, surges, and other power disturbances.
2. Коопсуздук маалыматы
Observe all warnings and operating instructions in this manual. Failure to do so may result in injury or equipment damage.
Жалпы коопсуздук
- Бул UPS имараттын ичинде гана колдонууга арналган.
- Бул UPSти күндүн түз нурунда, суюктуктар менен байланышта же ашыкча чаң же нымдуулук бар жерде иштетпеңиз.
- Ensure the ventilation openings on the UPS are not blocked.
- Do not connect appliances that would overload the UPS.
- Батареяларды тейлөө батарейкаларды жана талап кылынган сактык чараларын билген кызматкерлер тарабынан аткарылышы же көзөмөлгө алынышы керек.
Электр коопсуздугу
- The UPS contains internal batteries that may present a shock hazard even when disconnected from the AC power.
- The UPS must be connected to a grounded AC outlet.
- UPS корпусун ачпаңыз. Ичинде колдонуучу тейлей турган тетиктер жок.
- Use only the specified power cords and connectors.
3. Пакеттин мазмуну
Carefully unpack the UPS and inspect for shipping damage. If any damage is found, notify the carrier and dealer. The package should contain the following items:
- APC Smart-UPS SRT 5000VA 208V Unit
- Документтик CD
- Коопсуздук маалыматы боюнча колдонмо
- USB кабели
- Сериялык кабель
- Network Management Card (if included with specific model variant)
- Rack-mounting hardware (if applicable)
- Tower stand (if applicable)
4. Орнотуу
4.1 Сайтты даярдоо
Before installing the UPS, ensure the installation site meets the following requirements:
- Температура: 0°Cден 40°Cге чейин (32°F—104°F)
- Нымдуулук: Салыштырмалуу нымдуулук 0%тен 95%ке чейин, конденсацияланбайт
- Тазалоо: Allow adequate space around the UPS for proper ventilation.
- Салмагы: The UPS is heavy. Use appropriate lifting techniques and personnel.
4.2 Физикалык орнотуу
The SRT 5000VA can be installed in a tower configuration or rack-mounted. Refer to the specific installation guide for detailed rack-mounting instructions.
- Place the UPS on a stable, level surface. If using the tower stand, ensure it is securely attached.
- Ensure all ventilation openings are clear.
4.3 Туташтыргыч жабдуулар
Connect your equipment to the output receptacles on the rear panel of the UPS. Do not overload the UPS. Refer to the specifications section for capacity details.
Image: Rear panel of the UPS, illustrating connection points for input power, output receptacles, and communication ports.
4.4 Баштапкы кубаттуулук
- Connect the UPS input power cord to a grounded 208V AC outlet.
- Press the power button on the front panel to turn on the UPS.
- The UPS will perform a self-test. The display will show status information.
5. UPSти иштетүү
5.1 Алдыңкы панелдин дисплейи
The front panel LCD provides real-time status information and allows configuration of UPS settings. Use the navigation buttons to scroll through menus and select options.
Сүрөт: деталдуу view of the UPS front panel display, indicating current operational status and settings.
5.2 Негизги функциялар
- Күйгүзүү/өчүрүү: Press the power button to turn the UPS on or off.
- Өзүн-өзү сыноо: Initiate a manual self-test through the LCD menu to verify battery and UPS functionality.
- Ойготкучтун үнүн өчүрүү: Temporarily silence audible alarms via the front panel button.
- Батареянын абалы: Monitor battery charge level and estimated runtime on the display.
6. Техникалык тейлөө
6.1 Батареяны алмаштыруу
The UPS uses hot-swappable, user-replaceable battery modules. Replace batteries only with APC-approved replacement battery cartridges (RBCs). Refer to the specific battery replacement guide for detailed instructions.
Эскертүү: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the manufacturer's instructions and local regulations.
6.2 Тазалоо
Clean the exterior of the UPS with a soft, damp cloth. Do not use solvents or abrasive cleaners. Ensure ventilation openings are free of dust and debris.
7. Кыйынчылыктарды
This section provides solutions to common issues. If a problem persists after attempting these steps, contact APC technical support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| UPS күйбөйт | No input power; discharged battery | Verify input power connection; allow UPS to charge for several hours. |
| UPS тынымсыз сигнал берет | On battery; low battery; overload | Check input power; allow battery to charge; reduce connected load. |
| Overload indicator is lit | Too much equipment connected | Disconnect non-essential equipment until the indicator turns off. |
| Battery runtime is shorter than expected | Battery nearing end of life; high load | Perform a battery self-test; consider replacing the battery module; reduce connected load. |
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | SRT5KXLT |
| Кубаттуулугу | 5000VA / 4500W |
| Киргизүү көлөмүtage | 208V |
| Output Voltage | 208V |
| Батарея түрү | Коргошун кислотасы |
| Өлчөмдөрү (H x W x D) | 17" x 5.1" x 28.3" |
| Салмагы | 2 фунт |
| Иштөө температурасы | 0°Cден 40°Cге чейин (32°F—104°F) |
9. Кепилдик жана колдоо
9.1 Кепилдик маалыматы
APC provides a standard warranty for this product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official APC webсайт. Бардык кепилдик доолору үчүн сатып алуунун далили талап кылынат.
9.2 Техникалык колдоо
For technical assistance, troubleshooting, or service inquiries, please contact APC customer support. Have your product model number (SRT5KXLT) and serial number ready when contacting support.
You can find contact information on the APC website or in the documentation provided with your UPS.
