Pulsar PG10000B16 10,000W кош отундуу көчмө генератор колдонуучусунун колдонмосу

Introduction

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your Pulsar PG10000B16 10,000W Dual Fuel Portable Generator. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

Негизги өзгөчөлүктөрү:

• 10,000W peak / 8,000W rated (gasoline) and 9,000W peak / 7,000W rated (LPG) power output.
• Equipped with a powerful 420cc, 4-stroke, OHV, air-cooled engine.
• Features a large 6.6-gallon fuel tank, providing up to 12 hours of continuous operation at half load on gasoline.
• Includes Switch & Go technology for seamless transitioning between LPG and gasoline fuel sources during operation.
• Electric push start with recoil backup for quick and easy startup.

Figure 1: ашыкview of the Pulsar PG10000B16 Dual Fuel Portable Generator.

Орнотуу жана чогултуу

Before operating your generator, ensure it is properly assembled and prepared for use. This section outlines the initial setup steps.

1. Таңгактан чыгаруу жана текшерүү:

• Генераторду таңгагынан этияттык менен чыгарыңыз.
• Inspect for any shipping damage. Contact your retailer immediately if damage is found.
• Таңгактоо тизмесинде саналган бардык компоненттердин бар экенин текшериңиз.

2. Wheel and Handle Assembly:

Attach the wheels and drop-down handles to the generator frame. This process may be easier with two people due to the unit's weight. Ensure all fasteners are securely tightened.

Figure 2: The generator with its wheels and handles attached, ready for transport.

3. Мотор майын кошуу:

• Май толтуруучу капкактын/ченегичти табыңыз.
• Add the recommended engine oil (refer to the oil type and capacity in the Specifications section) until it reaches the full mark on the dipstick. Do not overfill.

4. Fuel Connection:

• Бензин: Күйүүчү май багын жаңы, коргошунсуз бензин менен толтуруңуз. Ашыкча толтурбаңыз.
• LPG: Connect an LPG tank to the generator's LPG connection point using a suitable hose and regulator. Ensure all connections are secure and leak-free.

Figure 3: The control panel showing the fuel switch and various outlets.

5. Батареяны туташтыруу:

Connect the battery cables to the battery terminals, ensuring correct polarity (red to positive, black to negative). The generator features an electric start, powered by this battery.

Иштөө нускамалары

Follow these steps for safe and effective operation of your Pulsar Dual Fuel Generator.

1. Генераторду ишке киргизүү:

1. Күйүүчү май тандоо: Use the "Switch & Go" lever on the control panel to select either Бензин or Пропан (LPG).
2. Муунткуч рычагы: If starting a cold engine, move the choke lever to the "Closed" position. For a warm engine, leave it "Open".
3. Мотор алмаштыргыч: Кыймылдаткычты өчүргүчтү "ON" абалына буруңуз.
4. Электр старт: Press and hold the electric start button until the engine starts.
5. Recoil Start (Backup): If the electric start fails or the battery is low, pull the recoil start handle firmly and smoothly until the engine starts.
6. Once the engine starts, gradually move the choke lever to the "Open" position.

2. "Switch & Go" Dual Fuel Technology:

The generator's "Switch & Go" feature allows you to seamlessly switch between gasoline and LPG fuel sources even while the generator is running. To switch fuels, simply move the fuel selector lever to the desired fuel type. This can be done without shutting down the generator, providing flexibility during extended power outages.

3. Электр шаймандарын туташтыруу:

The generator provides multiple AC outlets (120V and 120V/240V) and a DC 12V 8.3A output for battery charging. Always ensure the total wattage of connected devices does not exceed the generator's rated running wattage.

• For sensitive electronics, it is recommended to use a quality surge protector or inverter-style power strip to protect against power fluctuations.
• Ensure all devices are turned off before plugging them into the generator.
• Генераторду эч качан ашыкча жүктөбөңүз.

Figure 4: The control panel displaying the engine switch, hour meter, DC 12V 8.3A output, and multiple AC 120V and AC 120V/240V outlets.

4. Генераторду өчүрүү:

1. Генератордон бардык электрдик жүктөрдү ажыратыңыз.
2. Муздатуу үчүн генераторду жүксүз бир нече мүнөт иштетүүгө уруксат бериңиз.
3. Кыймылдаткычты өчүргүчтү "OFF" абалына буруңуз.
4. If storing for an extended period, turn off the fuel valve (for gasoline) or close the LPG tank valve.

Техникалык тейлөө

Regular maintenance is crucial for the longevity and reliable performance of your generator. Always ensure the generator is turned off and cooled down before performing any maintenance.

1. Engine Oil:

• Ар бир колдонуудан мурун майдын деңгээлин текшериңиз.
• Майды алгачкы 20 саат иштегенден кийин, андан кийин ар бир 100 саат сайын же жылына бир жолу, кайсынысы биринчи келсе, ошого жараша алмаштырып туруңуз.

2. Air Filter:

• Аба чыпкасын ар бир 50 саат сайын же ай сайын текшерип туруңуз.
• Кир болсо, тазалаңыз же алмаштырыңыз.

3. Учкун:

• Inspect and clean the spark plug every 100 hours or annually.
• эскирген же бузулган болсо, алмаштыруу.

4. Fuel System:

• For gasoline, use a fuel stabilizer if storing for more than 30 days.
• Drain the carburetor and fuel tank if storing for longer periods without stabilizer.
• For LPG, ensure the tank and connections are free from leaks.

5. Сактоо:

• Store the generator in a clean, dry, and well-ventilated area.
• Cover the generator to protect it from dust and moisture.

Проблемаларды чечүү

This section provides solutions to common operational issues. If you encounter problems not listed here, or if the suggested solutions do not resolve the issue, contact customer support.

Генератор ишке кирбейт:

• Күйүүчү май жок: Check gasoline level or LPG tank connection and supply.
• Күйүүчү клапан: Күйүүчү май клапанынын "ON" абалында экенин текшериңиз.
• Муунгучтар: Adjust the choke lever as appropriate for a cold or warm engine.
• Мотор алмаштыргыч: Verify the engine switch is in the "ON" position.
• Свеча: Шамдын булганганын же бузулгандыгын текшериңиз.
• Батарея (электрдик күйгүзүү): Check battery charge. If low, use the recoil start.

Эч кандай кубаттуулугу жок:

• Автоматтык өчүргүчтөр: Башкаруу панелиндеги автоматтык өчүргүчтөрдүн иштебей калганын текшериңиз. Зарыл болсо, баштапкы абалга келтириңиз.
• Ашыкча жүктөө: Reduce the total load connected to the generator.
• Байланыштары: Ensure all power cords are securely plugged into the generator outlets.

Кыймылдаткыч начар иштейт:

• Stale Fuel: Use fresh fuel. Drain old fuel if necessary.
• Аба чыпкасы: Clean or replace a dirty air filter.
• Свеча: Inspect and clean or replace the spark plug.

Техникалык шарттар

Figure 5: Product dimensions of the Pulsar PG10000B16 generator.

Кепилдик жана колдоо

For detailed warranty information, please refer to the warranty card included with your product or visit the official Pulsar website. If you require technical assistance, replacement parts, or have questions regarding your generator, please contact Pulsar customer support.

Байланыш маалыматы: Refer to your product packaging or the official Pulsar webакыркы кардарларды колдоо байланыш маалыматы үчүн сайт.