XCell BC-X4000 Fast Charger User Manual

1. Киришүү

This manual provides essential instructions for the safe and efficient operation of your XCell BC-X4000 Fast Charger. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage. The XCell BC-X4000 is designed for charging 1.2V Ni-MH/Ni-Cd and 3.7V Li-Ion rechargeable batteries.

2. Коопсуздук нускамалары

• Use the charger only for the specified battery types: 1.2V Ni-MH/Ni-Cd and 3.7V Li-Ion. Charging other battery types may cause explosion, rupture, or leakage, leading to personal injury or property damage.
• Кайра заряддалбаган батарейкаларды заряддоого аракет кылбаңыз.
• Ensure the charger is connected to a power outlet within the specified voltage диапазону (100-240V).
• Заряддоочу түзүлүштү жамгырга, нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
• Батарея терминалдарын кыска туташуудан сактаңыз.
• Заряддагычты балдардан жана үй жаныбарларынан алыс кармаңыз.
• Заряддагычты ажыратпаңыз же өзгөртпөңүз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
• If the charger or batteries become excessively hot during charging, discontinue use immediately and unplug the charger.
• Always place the charger on a stable, non-flammable surface during operation.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• 1 x XCell BC-X4000 Fast Charger with LCD Display
• 1 x Power Supply (100-240V)
• 1 х Колдонуучунун колдонмосу (бул документ)

4. Продукт бүтүп калдыview

The XCell BC-X4000 is a multi-functional battery charger featuring four independent charging slots and an LCD display for monitoring charging status.

1-сүрөт: Бурчтуу view of the XCell BC-X4000 Fast Charger, showing the four battery slots and the LCD display with current selection buttons.

2-сүрөт: Фронт view of the XCell BC-X4000 Fast Charger, highlighting the LCD display showing charging current options (300mA, 500mA, 700mA, 1000mA) and control buttons (CURRENT, DISPLAY, MODE).

Компоненттери:

• Battery Slots (1-4): Independent slots for charging individual batteries.
• LCD дисплей: Shows charging status, current, voltage, capacity, and time for each slot.
• CURRENT Button: Selects the charging current (300mA, 500mA, 700mA, 1000mA).
• DISPLAY баскычы: Cycles through display information for the selected slot.
• MODE баскычы: Selects charging mode (Charge, Refresh).
• Кубат киргизүү: Connects to the external power supply.

5. Орнотуу

1. Place the XCell BC-X4000 charger on a flat, stable, and heat-resistant surface.
2. Connect the provided power supply to the power input port on the charger.
3. Plug the power supply into a standard electrical outlet (100-240V AC). The LCD display will illuminate, indicating the charger is ready.

6. Иштөө нускамалары

6.1. Батареяларды салуу

Carefully insert one to four rechargeable batteries into the charging slots, ensuring correct polarity (+/-). The charger will automatically detect the battery type (Ni-MH/Ni-Cd or Li-Ion) and display initial information on the LCD.

6.2. Selecting Charging Current

After inserting a battery, the charger will default to a charging current. To change the current:

1. басыңыз УЧУРДА button repeatedly to cycle through available charging currents: 300mA, 500mA, 700mA, 1000mA.
2. Select a charging current appropriate for your battery's capacity. Higher currents charge faster but may generate more heat. Lower currents are generally safer for smaller capacity batteries and can extend battery life. The maximum charging current is 1500mA, but user-selectable options are 300/500/700/1000mA.
3. The selected current will be applied to the active slot. Each slot can be set independently.

6.3. LCD дисплейди түшүнүү

The LCD display provides real-time information for each charging slot. Press the ДИСПЛЕЙ button to cycle through different information for the currently selected slot, such as:

• Charge Current (mA): The current rate at which the battery is being charged.
• Тtage (V): Учурдагы томtagбатареянын e.
• Кубаттуулугу (мАч): The accumulated charge capacity.
• Time (h:mm): The elapsed charging time.

6.4. Refresh Function

The refresh function can help to restore older Ni-MH/Ni-Cd batteries that have developed a "memory effect" or lost capacity. This function typically involves discharging the battery completely before recharging it.

1. Insert the battery into a slot.
2. басыңыз РЕЖИМ button to select the "Refresh" mode.
3. The charger will begin the refresh cycle. This process can take several hours depending on the battery's condition.

6.5. Battery Defect Detection

The XCell BC-X4000 features automatic detection of defective batteries. If a battery is inserted and detected as faulty, the charger will display an error message (e.g., "NULL" or "ERR") for that slot and will not initiate charging. Remove and dispose of defective batteries responsibly.

7. Техникалык тейлөө

• Тазалоо: Disconnect the charger from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
• Сактагыч: Колдонулбай турган учурда, кубаттагычты салкын, кургак жерде, күндүн түз нурунан жана нымдуулуктан алыс сактаңыз.
• Батареянын байланыштары: Periodically check the battery contacts in the slots for dirt or corrosion. Clean gently with a cotton swab if necessary.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation provided with your purchase or contact XCell customer service directly. Details are typically available on the manufacturer's official webсайт же сатуучу аркылуу.

Өндүрүүчү: XCell

Модель номери: 141863