1. Коопсуздук маалыматы
Маанилүү коопсуздук көрсөтмөлөрү:
- Protect the unit with appropriate circuit breakers or fuses according to the nameplate.
- камсыз кылуу волtage (вольт) аталыш тактасында көрсөтүлгөнгө туура келет.
- Бул блок жерге туташтырылышы керек. Жез өткөргүчтөрдү гана колдонуңуз.
- 75°C (167°F) үчүн ылайыктуу электр өткөргүчтөрүн колдонуңуз.
- Орнотуудан, оңдоодон жана тазалоодон мурун автоматтык өчүргүчтөн/сактагычтан блоктун кубат менен камсыздоосун өчүрүңүз.
- Ensure that the unit is designed for the intended use (consult the product catalog or a representative if necessary).
- Сунушталган жылытуу кубаттуулугу: 1.25 Вт/куб фут (0.03 м³).
2. Продукт бүтүп калдыview
The Stelpro Uniwatt UHC2002WCW is a modern, surface-mounted convector heater designed for quiet operation and efficient heating in various indoor spaces. This model provides 2000 watts of heating capacity at 240V (1500W at 208V) and requires an external wall thermostat for temperature control.
Негизги өзгөчөлүктөрү:
- Жылытуу кубаттуулугу: 2000W (240V) / 1500W (208V), suitable for large rooms.
- Контролдоо: Requires an external wall thermostat (sold separately).
- Тынч иштөө: Engineered for minimal noise.
- Дизайн: Sleek, modern look with rounded corners and a durable steel cabinet.
- Орнотуу: Designed for surface mounting with a concealed bracket.
- Материал: 22-gauge steel front and cabinet.
- Өзгөчө өзгөчөлүгү: Cool Touch Exterior.
Продукт компоненттери:
This image displays the front of the Stelpro Uniwatt UHC2002WCW convector heater, highlighting its clean white finish and the top air outlet grille.
А деталдуу view of the heater's durable white finish, which is an epoxy-polyester powdercoat designed for a crisp matte look.
Бул сүрөт каптал профессионалды көрсөтөтfile of the convector heater, emphasizing its slim design which allows it to blend discreetly into any room.
An illustration detailing the physical dimensions of the heater, including its width, height, and depth, crucial for planning installation space.
3. Орнотуу жана орнотуу
This convector heater is designed for surface mounting and hardwired electric connection. Ensure all safety precautions are followed before beginning installation.
3.1 Determining Heating Requirements:
Before installation, determine the appropriate wattage for your space. The recommended heating capacity is 1.25 W per cubic foot (0.03 m³).
This table provides a guide to determine the required power (in watts) based on the area to be heated (in square feet or square meters), helping users select the correct heater for their space.
3.2 Жылыткычты орнотуу:
The heater features a concealed mounting bracket for a clean and professional appearance. Refer to the detailed instructions provided in the packaging for specific mounting steps.
This image illustrates the concealed mounting bracket, which allows the heater to be securely attached to the wall while maintaining a sleek, integrated look.
This image highlights the ease of installation for the convector heater, emphasizing its user-friendly design for mounting.
3.3 Электрдик туташуу:
This unit requires a 240V hardwired electric connection. Ensure the power supply is off at the circuit breaker before making any electrical connections. Connect the black and red wires, and ensure the ground wire is securely attached.
A diagram showing the necessary wiring for a 240V hardwired connection, including the black, red, and ground wires, for safe and proper electrical setup.
Video: Stelpro SOR1 High-End Convector Overview
Бул видеодо толук маалымат берилетview of a Stelpro high-end convector, demonstrating its features and design, which may be similar to the UHC2002WCW model.
4. Операция
The UHC2002WCW convector heater operates in conjunction with an external wall thermostat (sold separately). This thermostat will control the heater's on/off cycles to maintain the desired room temperature.
4.1 Втtage Орнотуулар:
The heater includes an internal switch to select between 1000W and 2000W output. This allows for flexibility based on the heating needs of the room. To adjust the wattage, the front panel must be removed, and the switch located inside the unit should be toggled. Always ensure the power supply is disconnected before accessing internal components.
This image shows the internal components of the heater, specifically highlighting the switch that allows users to select between 1000W and 2000W heating modes.
4.2 Thermostat Control:
Once installed and wired, the heater will respond to the external wall thermostat. Set the desired temperature on your wall thermostat, and the heater will activate or deactivate to maintain that setting.
5. Техникалык тейлөө
Regular maintenance ensures optimal performance and longevity of your convector heater. Always disconnect power at the circuit breaker before performing any maintenance.
- Тазалоо: Сыртын мезгил-мезгили менен жумшак, d менен сүртүп туруңузamp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the heater.
- Чаңды тазалоо: Gently vacuum or brush away any dust accumulation from the air intake and outlet grilles.
- Текшерүү: Annually inspect the power connections and mounting for any signs of wear or damage. If any issues are found, consult a qualified electrician.
6. Кыйынчылыктарды
If you experience issues with your heater, refer to the following common troubleshooting steps. For problems not listed here, contact customer support or a qualified electrician.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жылыткыч күйбөйт. | No power supply; Thermostat set too low; Internal wattage switch off. | Check circuit breaker/fuse. Ensure thermostat is set above room temperature. Verify internal wattage switch is in 1000W or 2000W position (power off before checking). |
| Жылуулук чыгаруу жетишсиз. | Ватtage setting too low; Room size exceeds heater capacity; Airflow obstruction. | Check internal wattage switch (set to 2000W if needed). Ensure heater capacity matches room size. Clear any obstructions from grilles. |
| Иш учурунда адаттан тыш үндөр. | Loose components; Dust accumulation in fan. | Ensure all mounting screws are tight. Clean fan and internal components (power off first). If noise persists, contact support. |
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Stelpro |
| Модель номери | UHC2002WCW |
| Түс | Ак |
| Продукциянын өлчөмдөрү | 88.9 x 10 x 44.61 cm (35 x 3.9 x 17.5 inches); 8.57 kg (18.9 lbs) |
| Power/Wattage | 2000 ватт (240 В чыңалууда) |
| Тtage | 240 вольт |
| Материал | Болот |
| Өзгөчө өзгөчөлүк | Cool Touch Exterior |
| Жылытуу ыкмасы | мантиядагы |
| Монтаж түрү | Дубалга орнотуу |
| Ички/тышкы колдонуу | Indoor |
| Бизнестин жери | Stelpro - 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 0A2 |
8. Кепилдик жана колдоо
Stelpro products are proudly made in Canada. For warranty information, technical support, or service inquiries, please refer to the official Stelpro webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
This image features the "Proudly Made in Canada" logo, indicating the origin of Stelpro products.
