Theben RM 16 S KNX 16 каналдуу которуштуруу кыймылдаткычынын колдонуучу колдонмосу

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of the Theben RM 16 S KNX 16-Channel Switching Actuator. Please read this manual carefully before using the device to ensure proper functionality and safety.

The Theben RM 16 S KNX is a DIN rail mounted switching actuator designed for KNX bus systems. It features 16 independent relay outputs for controlling various electrical loads.

2. Коопсуздук нускамалары

Маанилүү: Installation and commissioning must only be carried out by a qualified electrician in accordance with national regulations and safety standards.

• Орнотуудан же тейлөөдөн мурун электр энергиясын өчүрүңүз.
• Туура жерге туташтырууну камсыз кылуу.
• Аппаратты нымдуулукка же экстремалдык температурага дуушар кылбаңыз.
• Observe maximum load ratings for each channel.
• The device is designed for commercial and private use.

3. Продукт бүтүп калдыview

The Theben RM 16 S KNX is a 16-channel switching actuator for KNX installations. It is designed for DIN rail mounting and occupies 8 TE (standard width units).

3.1-сүрөт: Фронт view of the Theben RM 16 S KNX Switching Actuator. This image shows the device with its 16 output terminals (C1-C16) at the top, manual override buttons (C1-C8 and C9-C16) with LED status indicators, and the KNX bus connection point. The bottom section displays the power input terminals (L, N) and the operating voltage range (110-240V~50-60Hz). The 'Set Phys Adr' button for physical address assignment is also visible.

3.1. Негизги өзгөчөлүктөрү

• 16 independent relay outputs.
• LED status indicator for each channel.
• Manual override switches with status display (even without bus voltagжана).
• KNX bus coupling unit integrated.
• Functions: ON/OFF, pulse, ON/OFF delay, staircase lighting with pre-warning (according to DIN 18015-2).
• Logical links: lock, AND, release.
• Central objects with and without priority.
• Scene recall and storage (object), scene object for each channel.
• DIN rail mounting (8 TE width).

4. Орнотуу

4.1. Монтаждоо

1. Негизги электр менен камсыздоонун ажыратылганын текшериңиз.
2. Mount the device on a standard DIN rail (35 mm) in a distribution board or suitable enclosure.
3. Аппараттын айланасында жетиштүү желдетүүнү камсыз кылыңыз.

4.2. Электр зымдары

Refer to the wiring diagram below and the labels on the device for correct connections.

• Электр камсыздоо: Connect the main power supply (110-240V~50-60Hz) to the L and N terminals at the bottom of the device.
• KNX Bus: Connect the KNX bus line to the dedicated bus terminals.
• Туташууларды жүктөө: Connect the loads to the C1-C16 output terminals. Each channel supports a maximum switching current of 16 A and a maximum switching power of 2000 W (output power 3680 W). Different phases can be connected.

Эскертүү: Always ensure correct polarity and secure connections to prevent damage or malfunction.

5. Setup and Commissioning

5.1. Physical Address Assignment

To assign the physical address for the device within the KNX system:

1. Apply bus voltagд аппаратка.
2. Press the 'Set Phys Adr' button (indicated by a 'U' symbol with an arrow) on the front of the device. The programming LED will illuminate.
3. Use the ETS (Engineering Tool Software) to download the physical address and application program to the device.
4. Once programmed, the programming LED will turn off.

5.2. ETS Configuration

The full functionality of the RM 16 S KNX is configured via the ETS software. This includes:

• Assigning group addresses to individual channels.
• Configuring switching functions (ON/OFF, pulse, delay, staircase lighting).
• Setting up logical operations (AND, OR, lock).
• Defining scene control parameters.
• Configuring feedback objects for each channel.

6. Операция

6.1. Кол менен иштөө

Each channel (C1-C16) has a corresponding manual override button on the front panel. These buttons allow for local control of the outputs, independent of the KNX bus voltage.

• Pressing a button toggles the state of the corresponding relay output.
• The LED next to each button indicates the current switching status of the channel (ON/OFF).

6.2. KNX Bus Operation

The primary operation of the device is via the KNX bus system. Commands sent over the bus will control the switching states of the 16 channels based on the ETS configuration.

• Которулууда: Control individual channels or groups of channels (e.g., lights, blinds).
• Сахнаны башкаруу: Recall or save predefined scenes that involve multiple channels.
• Central Commands: Respond to central ON/OFF commands or continuous ON/OFF states.

7. Техникалык тейлөө

The Theben RM 16 S KNX is designed for maintenance-free operation. However, periodic checks are recommended:

• Бардык туташуулардын коопсуз жана коррозия жок экендигин текшериңиз.
• Аппаратты чаңдан жана таштандыдан алыс кармаңыз.
• Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.

In case of malfunction, refer to the troubleshooting section or contact qualified personnel.

8. Кыйынчылыктарды

If the problem persists after attempting these solutions, please contact Theben technical support or a qualified electrician.

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information and technical support, please contact your local Theben distributor or visit the official Theben webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Theben GmbH
Hohenbergstraße 32
72401 Haigerloch
Германия

Эскертүү: Specific warranty terms may vary by region. Please consult the official Theben documentation or webэң акыркы маалымат үчүн сайт.