AVENLI JL-3000A Sand Filter System

Introduction

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your AVENLI JL-3000A Sand Filter System. Please read this manual thoroughly before attempting to install or operate the unit. Retain this manual for future reference.

The AVENLI JL-3000A Sand Filter System is designed to provide superior filtration for your pool, ensuring clean and clear water. It features a durable, corrosion-resistant tank and a 6-position valve for various operational modes.

Маанилүү коопсуздук маалыматы

• Бул продукт сыртка гана арналган.
• Кандайдыр бир тейлөөнү же тейлөөнү аткаруудан мурун ар дайым электр кубатын ажыратыңыз.
• Бардык электр туташуулары квалификациялуу электрик тарабынан жасалганын жана жергиликтүү эрежелерге ылайык келгенин текшериңиз.
• Иштеп жаткан учурда балдарды фильтр системасынан алыс кармаңыз.
• Do not operate the filter system if any part is damaged or missing.
• Use only silica sand of the specified grade (0.7-1.25 mm).

Пакеттин мазмуну

Сураныч, орнотууну улантуудан мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз.

• 1 x AVENLI JL-3000A Sand Filter System Unit
• 1 х Манометр
• Hoses and connectors (may vary by package)
• Instruction Manual

Эскертүү: Filter sand is not included and must be purchased separately. Recommended silica sand size is between 0.7 mm and 1.25 mm, with an approximate capacity of 20 kg.

Техникалык мүнөздөмөлөр

Орнотуу жана орнотуу

1. Фильтрди жайгаштыруу: Place the sand filter system on a firm, level surface, close to the pool and a power outlet. Ensure it is protected from direct sunlight and harsh weather conditions.
2. Фильтр күмүн кошуу:
   • Remove the top cover of the filter tank.
   • Carefully pour the recommended amount (approx. 20 kg) of silica sand (0.7-1.25 mm) into the tank. Ensure the center pipe is not dislodged during this process.
   • Distribute the sand evenly. Do not overfill the tank.
   • Replace the top cover and secure it firmly.
3. Туташтыруучу шлангдар:
   • Connect the pool's skimmer/suction line to the "PUMP" inlet on the filter system.
   • Connect the pool's return line to the "RETURN" outlet on the filter system.
   • Connect a backwash hose to the "WASTE" port, directing it to an appropriate drainage area.
   • Бардык шланг clampжана туташуулар агып кетүүнүн алдын алуу үчүн бекем.
4. Электр байланышы: Электр шнурын жерге туташтырылган электр розеткасына туташтырыңыз. томду камсыз кылууtage matches the system's requirements (220-240V).
5. Насосту толтуруу: Before starting, ensure the pump is primed by filling it with water. This prevents dry running and damage to the pump.

1-сүрөт: Бүттүview of the AVENLI JL-3000A Sand Filter System, showing the main unit with connected hoses and pressure gauge.

2-сүрөт: The AVENLI JL-3000A Sand Filter System installed beside a pool, illustrating typical placement and connections.

Иштөө нускамалары

The AVENLI JL-3000A features a 6-position multi-port valve for various operational modes. Always turn off the pump before changing the valve position to prevent damage.

• Чыпка: This is the standard operating mode for daily filtration. Water is pumped through the sand bed, filtered, and returned to the pool.
• ЖУУ: Used after backwashing to flush out any remaining dirt from the sand bed before returning to FILTER mode. Run for 30-60 seconds.
• КАЙРА АЙЛАНА: Water is circulated through the pump and valve, bypassing the filter sand. Useful for distributing chemicals without filtering.
• АРТКА ЖУУ: Reverses the water flow through the sand bed to clean it. Dirty water is directed out through the waste port. Perform when the pressure gauge reads 8-10 PSI above its clean operating pressure. Run until water runs clear (approx. 2-3 minutes).
• ЖАБЫК: Shuts off all flow to the filter. Use for servicing the pump or filter. Never operate the pump with the valve in the CLOSED position.
• ТАШТАНДЫЛАР (АГЫЗУУ): Drains water directly from the pool through the waste port, bypassing the filter. Useful for lowering pool water level or vacuuming heavy debris directly to waste.

Басым өлчөгүч: The integrated pressure gauge indicates the internal pressure of the filter system. A rising pressure indicates that the filter sand is becoming dirty and requires backwashing.

Техникалык тейлөө

• Үзгүлтүксүз кайра жуу: Backwash the filter when the pressure gauge reads 8-10 PSI above its normal clean operating pressure, or at least once a week during heavy use.
• Чайкоо: Always rinse the filter after backwashing to prevent dirty water from returning to the pool.
• Кумду алмаштыруу: Filter sand typically needs to be replaced every 3-5 years, depending on usage and water quality. Refer to the "Adding Filter Sand" section for instructions.
• Кыштоо: In colder climates, drain all water from the filter system and pump to prevent freezing damage. Store the unit in a dry, protected area.
• Текшерүү: Periodically inspect hoses, clamps, and seals for wear or damage. Replace any worn parts immediately.

Проблемаларды чечүү

Кепилдик жана Кардарларды колдоо

Кепилдик жөнүндө маалымат алуу үчүн, сатып алуу учурунда берилген документтерди караңыз же сатуучуга кайрылыңыз. Кепилдик боюнча дооматтар үчүн сатып алууну тастыктаган документти сактап коюңуз.

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact AVENLI customer support or your authorized service center. Provide your model number (JL-3000A) and purchase date when seeking support.