Introduction
The WTW Sentix H pH Electrode is specifically designed for challenging measurements, particularly in high alkaline solutions. This specialized electrode ensures accurate pH readings even in low-ion samples or when dealing with very small volumes. Its robust design and advanced features make it a reliable tool for various laboratory and industrial applications.

1-сүрөт: WTW Sentix H pH Electrode. This image displays the full length of the electrode, highlighting its slender body, the S7 plug head at the top, and the sensing bulb at the bottom. The blue labeling on the electrode body is also visible.
Жайгашуу
Proper setup is crucial for optimal performance of your Sentix H pH Electrode. Follow these steps:
- Пакеттен чыгаруу: Carefully remove the electrode from its packaging. Inspect for any visible damage.
- Сактоочу чечимди алып салуу: The electrode tip is typically protected by a cap containing a storage solution. Remove this cap. Do not discard the cap or solution, as it is needed for storage.
- Чайкоо: Rinse the electrode tip thoroughly with distilled or deionized water to remove any residual storage solution. Gently blot dry with a lint-free tissue.
- Connecting to Meter: Connect the S7 plug head of the electrode to the corresponding S7 input port on your compatible pH meter. Ensure a secure connection.
- Pre-conditioning (if necessary): For new electrodes or those that have been stored dry, immerse the electrode tip in a suitable electrode storage solution or pH 7 buffer for at least 30 minutes to an hour before first use.
Иштөө нускамалары
The Sentix H electrode is optimized for high alkaline solutions. Adhere to the following operational guidelines:
- Калибрлөө: Always calibrate the electrode with fresh pH buffer solutions (e.g., pH 7.00 and pH 10.00 or pH 12.00 for high alkaline range) before each measurement session or as recommended by your pH meter's manual. Ensure the buffers are at the same temperature as your samples.
- Sample Immersion: Immerse the electrode tip fully into the sample solution, ensuring the liquid junction is completely submerged. Stir the sample gently to ensure homogeneity and stable readings.
- Окуунун туруктуулугу: Allow sufficient time for the reading to stabilize. This electrode features special glass membranes and an adapted diaphragm technique for optimal accuracy, but stabilization time can vary depending on the sample.
- Rinsing Between Samples: Rinse the electrode thoroughly with distilled or deionized water between each sample measurement to prevent cross-contamination.
- Температураны компенсациялоо: Utilize the temperature compensation feature of your pH meter, or ensure samples and buffers are at a consistent temperature.
Техникалык тейлөө
Regular maintenance extends the lifespan and ensures the accuracy of your electrode:
- Тазалоо:
- Жалпы тазалоо: After each use, rinse the electrode thoroughly with distilled or deionized water.
- Протеиндик депозиттер: For protein contamination, soak the electrode in a pepsin/HCl solution for several hours.
- Inorganic Deposits: For inorganic deposits, soak in a 0.1 M HCl or 0.1 M HNO3 solution for 15-30 minutes.
- Grease/Oil: For grease or oil, clean with a mild detergent solution, then rinse thoroughly.
- Сактагыч: Always store the electrode with its tip immersed in a suitable electrode storage solution (e.g., 3M KCl solution) or the original storage solution provided. Never store the electrode dry or in distilled water.
- Электролиттин деңгээли: Ensure the electrolyte level in the electrode is maintained. Refill if necessary according to the electrode's specific requirements.
- Текшерүү: Periodically inspect the glass bulb and junction for cracks, scratches, or blockages.
Проблемаларды чечүү
Эгер көйгөйлөргө туш болсоңуз, жалпы көйгөйлөр жана аларды чечүү жолдору үчүн төмөнкү таблицага кайрылыңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Туруксуз же Дрейф окуулары |
|
|
| Жай жооп берүү убактысы |
|
|
| Inaccurate Readings / Calibration Failure |
|
|
Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Модель аты | Sentix H pH Electrode |
| Элемент моделинин номери | 0916A26EA |
| Өндүрүүчү | WTW |
| ASIN | B01N7MVTLV |
| Колдонмо | High Alkaline Solutions, Low-ion Samples, Small Volumes |
| Plug Head | S7 |
| Негизги өзгөчөлүктөрү | Special glass membranes, adapted diaphragm technique |
Кепилдик жана колдоо
For information regarding warranty coverage, technical support, or service, please contact WTW directly or refer to their official website. Keep your purchase receipt and model number handy for faster assistance.
Өндүрүүчү: WTW





