ROBOTIME Walking T-Rex Dinosaur 3D Wooden Puzzle: Instruction Manual

1. Киришүү

Thank you for choosing the ROBOTIME Walking T-Rex Dinosaur 3D Wooden Craft Kit Puzzle. This kit allows you to construct a detailed wooden model of a T-Rex that responds to sound with walking and roaring actions. This manual provides essential information for assembly, operation, and maintenance to ensure a successful and enjoyable experience.

2. Продукциянын өзгөчөлүктөрү

• Sound-Activated Movement: The assembled T-Rex model walks and roars in response to sound.
• 3D Wooden Puzzle: Construct a detailed T-Rex model from pre-cut wooden pieces.
• Educational Craft Kit: Enhances creativity and practical ability through hands-on assembly.
• Интерактивдүү дизайн: Provides an engaging experience once assembled.

3. Пакеттин мазмуну

Сураныч, монтаждоону баштоодон мурун бардык компоненттер бар экенин текшериңиз.

• Wooden Puzzle Sheets (pre-cut pieces)
• Мотор бирдиги
• Instruction Manual

4. Монтаждоо боюнча нускамалар

Follow these steps carefully to assemble your T-Rex model. Handle wooden pieces gently to prevent breakage.

1. Бөлүктөрдү даярдоо: Carefully detach all wooden pieces from their sheets. Use sandpaper if necessary to smooth any rough edges.
2. Компоненттерди аныктоо: Refer to the diagrams in the included manual to identify each piece by its number.
3. Негизги корпусту чогултуу: Begin by constructing the central body structure, ensuring all interlocking tabs fit securely.
4. Integrate Motor: Install the motor unit into the designated compartment within the body. Ensure wires are routed correctly and connections are secure.
5. Буттарды бекитүү: Assemble and attach the legs, arms, and tail, paying close attention to the orientation of moving joints.
6. Construct Head: Assemble the head and jaw components, ensuring the jaw can move freely if designed to do so.
7. Акыркы байланыштар: Connect any remaining pieces and ensure all parts are firmly in place. Do not force pieces together.

5. Баштапкы орнотуу

After assembly, the T-Rex requires batteries for operation.

1. Батарея бөлүмү: Locate the battery compartment on the T-Rex model, typically on its back or underside.
2. Батареяларды салыңыз: Insert the required number of AAA batteries (not included) according to the polarity indicators (+/-).
3. Жабуу бөлүм: Батарея бөлүгүнүн капкагын бекем жабыңыз.

6. Иштөө нускамалары

The ROBOTIME Walking T-Rex is designed for sound-activated interaction.

1. Күйгүзүү: Locate the power switch, usually near the battery compartment, and switch it to the 'ON' position.
2. Үндү активдештирүү: Make a distinct sound, such as a clap or a loud voice, near the T-Rex. The model will respond by walking and emitting a roaring sound.
3. Кыймылды байкоо: The T-Rex will typically walk a short distance and roar before pausing, awaiting the next sound input.
4. Өчүрүү: When not in use, switch the power to 'OFF' to conserve battery life.

7. Техникалык тейлөө

Proper care will extend the life of your wooden T-Rex model.

• Тазалоо: Wipe the model gently with a dry, soft cloth. Avoid using water or cleaning solutions, as they can damage the wood.
• Сактагыч: Store the model in a dry environment away from direct sunlight and extreme temperatures to prevent warping or fading of the wood.
• Батареяга кам көрүү: Эгерде продукт агып кетпеши үчүн узак убакыт бою колдонулбаса, батареяларды алып салыңыз.
• Колдонуу: Avoid dropping or applying excessive force to the model, as wooden pieces can break.

8. Кыйынчылыктарды

If you encounter issues with your T-Rex model, refer to the following common solutions:

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ROBOTIME webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.