1. Киришүү
This instruction manual provides essential information for the safe and correct installation, use, and maintenance of your Teka CNL2002 Hood Front Panel. Please read this manual thoroughly before proceeding with installation or use, and retain it for future reference.
The Teka CNL2002 Hood Front Panel is designed as a replacement or aesthetic component for compatible Teka extractor hoods, featuring integrated handles that may also serve as a remote control holder.
2. Коопсуздук маалыматы
Ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Кубатты өчүрүү: Before attempting any installation, removal, or maintenance, ensure the extractor hood's power supply is completely disconnected at the main circuit breaker.
- Кесиптик орнотуу: Эгер кандайдыр бир кадамга ишенбесеңиз, квалификациялуу техникке кайрылыңыз.
- Этияттык менен мамиле кылуу: The panel may have sharp edges or delicate components. Wear protective gloves if necessary.
- Коопсуз бекитүү: Ensure all screws and fasteners are securely tightened to prevent the panel from detaching.
- Балдардан алыс болуңуз: Small parts and packaging materials can be a choking hazard.
3. Пакеттин мазмуну
Бардык компоненттер бар экенин жана бузулбаганын текшериңиз:
- Teka CNL2002 Hood Front Panel (Brown)
- (Optional: Mounting screws or clips, if included by manufacturer)
An image showing the long, rectangular brown front panel for the Teka CNL2002 extractor hood. The panel features a smooth surface with a slight curve and a subtle brand logo on the left side.
4. Орнотуу боюнча нускамалар
These instructions are general guidelines. Refer to your specific extractor hood's manual for detailed installation steps if available.
- Даярдоо: Ensure the extractor hood is turned off and disconnected from the main power supply.
- Remove Old Panel (if applicable): Carefully locate and remove any screws, clips, or latches securing the existing front panel. Support the panel as you remove it to prevent damage.
- Position New Panel: Align the Teka CNL2002 Hood Front Panel with the mounting points on your extractor hood. Ensure the handles are correctly oriented.
- Коопсуздук панели: Fasten the new panel using the appropriate screws or clips. Do not overtighten, but ensure the panel is firmly attached and does not wobble.
- Акыркы текшерүү: Verify that the panel is securely installed and that all moving parts (if any, like retractable elements) operate smoothly.
- Кубатты кайра туташтыруу: Once installation is complete and verified, reconnect the extractor hood to the main power supply.
5. Operating the Hood Front Panel
The Teka CNL2002 Hood Front Panel serves as a functional and aesthetic component of your extractor hood. Its primary functions include:
- Эстетикалык интеграция: Provides a finished look to the extractor hood.
- Колдун иштеши: The integrated handles allow for easy manipulation of the hood's retractable or adjustable elements.
- Remote Control Holder: The design may incorporate a feature to hold a remote control, enhancing convenience.
No specific electronic operation is associated directly with the front panel itself, beyond its mechanical interaction with the hood's existing controls or features.
6. Техникалык тейлөө жана тазалоо
To maintain the appearance and longevity of your hood front panel:
- үзгүлтүксүз тазалоо: бети жумшак менен сүртүп, гamp кездеме жана жумшак, абразивдүү эмес тазалоочу каражат.
- Катуу химиялык заттардан алыс болуңуз: Do not use abrasive cleaners, scouring pads, or strong chemical solvents, as these can damage the finish.
- Кылдат кургатуу: After cleaning, dry the panel completely with a soft, dry cloth to prevent water spots.
- бекиткичтерди текшерүү: Periodically check that all mounting screws or clips remain tight.
7. Кыйынчылыктарды
As a passive component, troubleshooting for the front panel is limited. Most issues relate to installation or physical damage.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Panel is loose or wobbly | Improper installation; loose fasteners. | Ensure all mounting screws or clips are securely tightened. Re-align if necessary. |
| Scratches or damage to the surface | Physical impact; abrasive cleaning. | Minor scratches may be polished with specialized products (test in an inconspicuous area). For significant damage, replacement may be necessary. |
| Handles not functioning correctly | Misalignment; obstruction; damage to the hood's internal mechanism. | Check for obstructions. Ensure the panel is correctly aligned. If the issue persists, consult the hood's main instruction manual or a technician. |
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Тека |
| Модел | CNL2002 |
| Продукт түрү | Hood Front Panel |
| Түс | Күрөң |
| Шайкештик | Designed for Teka CNL2002 extractor hoods |
Эскертүү: Техникалык мүнөздөмөлөр эскертүүсүз өзгөртүлүшү мүмкүн.
9. Кепилдик жана колдоо
Specific warranty information for this replacement part may vary depending on your region and the retailer from whom it was purchased. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or service inquiries, please contact Teka customer service or your authorized dealer. Contact details can typically be found on the official Teka website or in the documentation provided with your original extractor hood.
You can visit the official Teka webкөбүрөөк маалымат алуу үчүн сайт: www.teka.com
