American Standard Studio 60" x 32" Bathtub Wall Set (Model 2946BW.011) Instruction Manual

1. Киришүү

This manual provides detailed instructions for the proper installation, operation, and maintenance of your American Standard Studio 60" x 32" Bathtub Wall Set, Model 2946BW.011. Please read all instructions carefully before beginning installation to ensure a safe and successful setup. Retain this manual for future reference.

Figure 1: American Standard Studio Bathtub Wall Set (Model 2946BW.011) installed in a modern bathroom setting.

2. Коопсуздук маалыматы

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of injury or property damage.

• Тиешелүү жеке коргоочу шаймандарды, анын ичинде коопсуздук көз айнектерин жана кол каптарды кийиңиз.
• Ensure the installation area is well-lit and free of obstructions.
• Turn off water supply before beginning any plumbing work.
• Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, квалификациялуу адиске кайрылыңыз.
• кичинекей бөлүктөрүн балдардан алыс кармаңыз.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттердин бар экенин жана бузулбаганын текшериңиз. Эгерде кандайдыр бир тетиктер жок болсо же бузулган болсо, орнотууну улантпаңыз жана кардарларды тейлөө кызматына кайрылыңыз.

• One (1) Back Wall Panel
• Two (2) Side Wall Panels
• Орнотуу боюнча колдонмо (бул документ)

Figure 2: The three-piece wall system, including the back wall and two side walls.

4. Керектүү куралдар

The following tools are typically required for the installation of the bathtub wall set:

• Өлчөө лентасы
• Деңгээл
• Карандаш же маркер
• Utility Knife or Saw (for trimming if necessary)
• Бургулоо
• Аргымак
• Appropriate Fasteners (screws, nails, or adhesive as per local building codes and product specifications)
• Калыптоочу тапанча жана силикон герметик (көгөрүп кетүүгө туруктуу)

5. Орнотуу боюнча нускамалар

This bathtub wall set is designed for direct mounting to studs and is compatible with American Standard Studio Bathtub models 2946.102 or 2946.202 (sold separately). The three-piece system features an interlocking tongue and groove construction to prevent water seepage.

5.1. Даярдоо

1. Ensure the bathtub is properly installed and leveled according to its manufacturer's instructions.
2. Clean the wall surfaces where the panels will be installed, ensuring they are dry, smooth, and free of debris.
3. Locate and mark the wall studs using a stud finder.
4. Measure the dimensions of the wall area to confirm the wall set will fit. The product dimensions are 60"L x 32"W x 58"H.

5.2. Installing the Back Wall Panel

1. Carefully position the back wall panel against the wall, centering it over the bathtub.
2. Ensure the panel is level and flush with the top edge of the bathtub.
3. Secure the back wall panel to the wall studs using appropriate fasteners. Follow local building codes for fastener type and spacing.
4. Apply a continuous bead of silicone sealant along the top edge of the bathtub where it meets the back wall panel.

5.3. Installing the Side Wall Panels

1. Take one side wall panel. Align its interlocking edge with the corresponding groove on the back wall panel.
2. Press the side panel firmly into place, ensuring a tight fit to engage the tongue and groove mechanism. This design helps prevent water seepage.
3. Verify the side panel is level and flush with the bathtub rim.
4. Secure the side wall panel to the wall studs.
5. Repeat the process for the second side wall panel.
6. Apply a continuous bead of silicone sealant along all seams where the wall panels meet each other and the bathtub.

Figure 3: The installed wall set features six generous shelves for storage, integrated into the design.

6. Техникалык тейлөө

The American Standard Studio Bathtub Wall Set is made of durable polystyrene with a smooth, glossy finish, designed for low maintenance and easy cleaning.

6.1. Тазалоо

• Regularly clean the wall panels with a soft cloth or sponge and a mild, non-abrasive bathroom cleaner.
• Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the surface finish.
• Rinse thoroughly with water after cleaning to remove any cleaner residue.
• Wipe dry to prevent water spots and maintain the glossy appearance.

6.2. Seam Inspection

• Periodically inspect the silicone sealant along the seams where the panels meet and where they meet the bathtub.
• If any sealant appears cracked, peeling, or shows signs of mildew, remove the old sealant and reapply fresh, mildew-resistant silicone sealant to maintain a watertight seal.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your bathtub wall set.

7.1. Water Seepage

• Маселе: Water is leaking behind the wall panels or around the bathtub rim.
• Чечим: This product features an interlocking design to minimize seepage. However, ensure all silicone sealant applications are complete and intact. Inspect all seams and reapply sealant if any gaps or deterioration are found. Verify the bathtub itself is properly sealed and leveled.

7.2. Panel Fit Issues

• Маселе: Panels do not fit together correctly or are difficult to align.
• Чечим: Ensure the wall studs are plumb and the bathtub is level. Minor adjustments to the interlocking tabs may be necessary in some cases to achieve a proper fit. If significant manufacturing defects are suspected, contact American Standard customer service.

7.3. Surface Damage

• Маселе: Scratches or dull spots on the panel surface.
• Чечим: Avoid using abrasive cleaners or tools. For minor scratches, specialized acrylic repair kits may be available. For significant damage, replacement of the affected panel may be required.

8. Техникалык шарттар

9. Кепилдик маалыматы

The American Standard Studio 60" x 32" Bathtub Wall Set (Model 2946BW.011) is backed by a Чектелген Өмүр бою Кепилдик. This warranty covers manufacturing defects under normal use and service. For specific terms, conditions, and to make a warranty claim, please refer to the official American Standard warranty documentation or contact American Standard customer service directly.

10. Кардарларды колдоо кызматы

For technical assistance, replacement parts, or warranty inquiries, please contact American Standard customer service. You can typically find contact information on the official American Standard webсайты же продукт сатуучу аркылуу.

Онлайн ресурстар: Расмий Америка стандартына баш багыңыз webпродуктуну каттоо, көп берилүүчү суроолор жана кошумча колдоо материалдары үчүн сайт.