Satco TK403 12W LED тегерек жол чырактарынын комплектинин колдонуу боюнча колдонмосу

1. Киришүү

This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your Satco TK403 12W LED Round Track Kit. Please read this manual thoroughly before beginning installation or use, and retain it for future reference.

The Satco TK403 is a 12-watt LED track lighting kit featuring a round design and a white finish, providing 3000K warm white light with a 36-degree beam angle. It is designed for indoor use to provide general room lighting, accentuating specific areas, or highlighting decorative elements.

2. Коопсуздук маалыматы

ЭСКЕРТҮҮ: Электр тогуна урунуу коркунучу бар. Орнотуудан же тейлөөдөн мурун, сактагыч кутучасындагы же автоматтык өчүргүчтөгү электр кубатынан ажыратыңыз.

• Always turn off the main power supply before installing, cleaning, or performing any maintenance on the fixture.
• Installation must be performed by a qualified electrician in accordance with all local electrical codes and ordinances.
• камсыз кылуу voltage арматуранын талаптарына шайкеш келет (120 Вольт).
• Do not install near any heat sources or in areas with excessive moisture. This product is for indoor use only.
• Арматураны өзгөртүүгө аракет кылбаңыз. Ар кандай өзгөртүүлөр кепилдикти жокко чыгарып, коопсуздукка коркунуч келтириши мүмкүн.
• Зыян келтирбөө үчүн шайманды этияттык менен кармаңыз.

Сунуш 65 Эскертүү: Бул продукт Калифорния штатына рак жана тубаса кемтиктерди же башка репродуктивдик зыян келтирерин белгилүү болгон химиялык заттарды камтышы мүмкүн. Сатып алардан мурун жергиликтүү мыйзамдарды текшерип алыңыз.asing бул продукт.

3. Пакеттин мазмуну

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact your retailer or Satco customer support.

• Track Rail (Quantity: 1, approximately 48 inches in length)
• 12W LED Round Track Head (Quantity: 1)
• Монтаждоочу жабдуулар (бурамалар, анкерлер ж.б.)
• Instruction Manual

1-сүрөт: Illustrative image of a Satco track lighting system. Actual kit contents may vary based on specific model configuration.

4. Техникалык шарттар

5. Орнотуу жана орнотуу

Керектүү куралдар: Screwdriver, Wire Strippers, Drill, Pliers, Voltage Tester, Safety Glasses.

Баштоодон мурун: Ensure the power is OFF at the circuit breaker. Read all instructions carefully.

1. Орнотуу аймагын даярдоо:

   Locate the desired mounting position for the track. Ensure it is a structurally sound surface capable of supporting the fixture's weight. Mark the mounting points for the track rail.

2. Mount the Track Rail:

   Drill pilot holes at the marked locations. Secure the track rail to the ceiling or wall using the provided mounting hardware. Ensure the track is firmly attached and level.
3. Wire the Track:

   Connect the track's power feed to the junction box wiring. Follow standard electrical wiring procedures: connect live to live (black to black), neutral to neutral (white to white), and ground to ground (green or bare copper to green or bare copper). Ensure all connections are secure with wire nuts.

4. Install Track Head:

   Align the track head adapter with the track rail. Insert the adapter into the track and twist to lock it into place. Ensure the contact points on the track head align correctly with the conductors inside the track rail. You should hear a click when it's securely seated.

   

   2-сүрөт: Example of a track lighting system installed in a living room setting, demonstrating its application.
5. Adjust Track Head:

   Once installed, the track head can be rotated and tilted to direct light as desired. Loosen any adjustment screws if necessary, position the head, and then re-tighten.

6. Күчтү калыбына келтирүү:

   Once installation is complete and all connections are secure, restore power at the circuit breaker and test the light.

6. Иштөө нускамалары

The Satco TK403 Track Kit operates like a standard light fixture. Once properly installed and powered, it can be controlled via a wall switch connected to the circuit. The track head is adjustable to direct light to specific areas.

• Күйгүзүү/өчүрүү: Use the wall switch connected to the track lighting circuit to turn the light on or off.
• Жарыктын багытын тууралоо: Gently pivot and rotate the track head to aim the light beam. Ensure not to force the movement beyond its natural range of motion.
• Караңгылык (эгер бар болсо): If connected to a compatible dimmer switch, the brightness of the LED track head can be adjusted. Refer to your dimmer switch's instructions for proper operation.

7. Техникалык тейлөө

The Satco TK403 LED Track Kit requires minimal maintenance due to its long-lasting LED technology.

• Тазалоо: Ensure power is OFF before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
• LED алмаштыруу: The LED light source in this fixture is integrated and not designed for user replacement. With an average rated life of 30,000 hours, frequent replacement is not anticipated.
• Текшерүү: Periodically inspect the track and track head for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

8. Кыйынчылыктарды

If you encounter issues with your Satco TK403 Track Kit, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, contact Satco customer support or a qualified electrician.

9. Кепилдик жана колдоо

The Satco TK403 Track Kit is covered by a 1 жылдык өндүрүүчүнүн кепилдиги сатып алынган күндөн тартып. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.

For warranty claims, technical support, or further assistance, please contact Satco customer service. You may need to provide your proof of purchase and the product model number (TK403).

Өндүрүүчү: Satco|Nuvo Lighting

Webсайт: www.satco.com