Prity K1CPW8 Cast Iron Stove with Water Exchanger User Manual

1. Киришүү

This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your Prity K1CPW8 cast iron wood-burning stove with an integrated water exchanger. Please read this manual thoroughly before installation and use.

1.1 Продукт бүттүview

The Prity K1CPW8 is a highly efficient wood-burning stove designed for heating living spaces and integrating with a central heating system via its built-in water exchanger. It features a durable cast iron construction, a ceramic heat-resistant glass in the combustion chamber, and a secondary door for convenience.

Сүрөт 1: Алдыңкы view of the Prity K1CPW8 Cast Iron Stove, showing the combustion chamber with visible flames and the lower compartment.

1.2 Коопсуздук эскертүүлөрү

• Өрт коркунучу: Always maintain safe distances from combustible materials. Refer to the specifications section for minimum clearances.
• Көмүртек кычкылы: Ensure proper ventilation and chimney draft to prevent carbon monoxide buildup. Install carbon monoxide detectors.
• Ысык беттер: The stove surfaces become extremely hot during operation. Use protective gloves when handling parts like the door handle. Keep children and pets away.
• Күйүүчү май түрү: Only use dry wood as fuel. Do not burn plastics, treated wood, or other unsuitable materials.
• Суу системасы: Ensure the water exchanger system is properly installed, filled, and vented before operating the stove. Overpressure can be dangerous.

2. Орнотуу жана орнотуу

Proper installation is crucial for the safe and efficient operation of your stove. It is highly recommended that installation be performed by a qualified professional.

2.1 Таңгактан чыгаруу жана текшерүү

Мешти этияттык менен ачып, ташуу учурунда келип чыгышы мүмкүн болгон ар кандай бузулууларды текшериңиз. Ар кандай бузулууларды дароо жеткирүүчүңүзгө билдириңиз.

2.2 Жайгашкан жери жана уруксаттар

Choose a suitable location on a non-combustible floor. Ensure adequate clearance from walls, furniture, and other combustible materials. Refer to the technical specifications for exact minimum distances.

• Күйүүчү материалдарга чейинки минималдуу аралык:
  • Арткы: 400 мм
  • Каптал: 400 мм
  • Front: 800 mm (within the radiant area of the glass)

Figure 2: The Prity K1CPW8 stove positioned in a living room, demonstrating typical installation with a visible chimney pipe and wood storage.

2.3 Морду туташтыруу

Connect the stove to a suitable, properly sized chimney flue. Ensure all connections are sealed and airtight to prevent smoke leakage and ensure proper draft. The chimney must be clean and free of obstructions.

3-сүрөт: Жогорку view of the Prity K1CPW8 stove, showing the circular opening for chimney connection and a removable cover for a cooking plate.

2.4 Water Exchanger Connection

The integrated water exchanger requires connection to your central heating system. This must be done by a certified plumber. Ensure the system includes an expansion tank, circulating pump, safety valve, and pressure gauge. Fill the system with water and bleed all air before operation.

4-сүрөт: Арткы view of the Prity K1CPW8 stove, highlighting the two pipe connections for the integrated water exchanger system.

3. Иштөө нускамалары

3.1 Күйүүчү майдын түрү

Only use dry, seasoned firewood. Wood moisture content should be 16% ± 4% according to EN 13240:2006. Do not use wet wood, treated wood, coal, or any other combustible materials not specified for this stove.

3.2 Мешти күйгүзүү

1. Open the primary air intake fully.
2. Place crumpled paper or firelighters at the bottom of the combustion chamber.
3. Add a small amount of kindling on top of the paper/firelighters.
4. Light the paper/firelighters.
5. Once the kindling is burning well, gradually add larger pieces of dry firewood.
6. Эшикти коопсуз жабыңыз.

3.3 Температураны көзөмөлдөө

Adjust the primary and secondary air intakes to control the burn rate and heat output. Closing the air intakes will reduce the burn rate, while opening them will increase it. Avoid over-firing the stove, as this can damage the unit and lead to unsafe conditions.

Эскертүү: The manufacturer recommends not overloading the stove with too much wood to avoid high temperatures at the boiler outlet, especially if not connected to a regulated system.

4. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your Prity K1CPW8 stove.

4.1 Күлдү тазалоо

Remove ash regularly from the ash pan located below the cast iron grate. Do not allow ash to build up and block the air intake. Always ensure ashes are cold before disposal.

4.2 Айнек тазалоо

The ceramic glass in the combustion chamber may accumulate soot. Clean it when the stove is cold using a specialized glass cleaner for wood stoves or a damp cloth dipped in ash. Avoid abrasive cleaners.

4.3 Мор жана түтүн чыгаруучу түтүктөрдү тазалоо

Have your chimney and flue pipes inspected and cleaned by a certified chimney sweep at least once a year, or more frequently depending on usage. This prevents creosote buildup, which can lead to chimney fires.

4.4 Жалпы текшерүү

Periodically check all seals, gaskets, and connections for wear and tear. Replace any damaged parts immediately to maintain efficiency and safety.

5. Кыйынчылыктарды

This section addresses common issues you might encounter with your stove.

6. Техникалык шарттар

Below are the key technical specifications for the Prity K1CPW8 stove.

Figure 5: Energy efficiency label for Prity K1CPW8, indicating an A-class rating with 6.0 kW room heating and 7.0 kW water heating output.

Figure 6: Declaration of Performance document for the Prity K1CPW8, outlining compliance with EU regulations and technical specifications.

7. Кепилдик жана колдоо

Кепилдик жөнүндө маалымат алуу үчүн, сатып алуу учурунда сатуучуңуз тарабынан берилген шарттарды жана эрежелерди караңыз. Кепилдик боюнча дооматтар үчүн сатып алганыңызды тастыктаган документти сактап коюңуз.

For technical support or spare parts inquiries, please contact your authorized Prity dealer or the manufacturer directly. While specific spare parts availability information is not always provided, your dealer should be able to assist with service and parts.

Figure 7: Product label with barcode and manufacturer details, including "Prity 95 Ltd Bulgaria" and model K1CPW8.