Amewi Extreme PRO 4WD Brushless 1:12 Jeep (Model 22244) User Manual

1. Коопсуздук маалыматы

Read all instructions carefully before operating the Amewi Extreme PRO 4WD Brushless 1:12 Jeep. Failure to follow these safety guidelines may result in injury or damage to the product or property.

• Жашы боюнча сунуш: This product is recommended for users 14 years and older. Adult supervision is advised for younger users.
• Батареянын коопсуздугу: Use only the specified LiPo battery (7.4 V, 1500 mAh) and charger. Do not overcharge or short-circuit batteries. Always charge batteries on a non-flammable surface and never leave charging batteries unattended.
• Иштөө чөйрөсү: Operate the vehicle in open areas, away from people, pets, vehicles, and water. Avoid operating in wet conditions as the product is weather-resistant but not fully waterproof.
• Кыймылдуу бөлүктөр: Keep fingers, hair, and loose clothing away from moving parts such as wheels, gears, and drive shafts to prevent injury.
• Радио тоскоолдуктар: Ensure no other radio control devices are operating on the same frequency (2.4 GHz) to prevent loss of control.
• Тейлөө: Perform regular checks and maintenance as described in this manual to ensure safe operation.

2. Кутуда эмне бар

The Amewi Extreme PRO 4WD Brushless 1:12 Jeep package includes the following components:

• Desert Eagle-2 Dune Buggy RC Car (Amewi Extreme PRO 4WD Brushless 1:12 Jeep)
• 2.4 ГГц зымсыз алыстан башкаруу
• 220 V заряддагыч
• Жыйноочу ачкыч
• Spare Pinion Gear
• 7.4 V, 1500 mAh LiPo Battery
• Illustrated Instructions (this manual)

1-сүрөт: Contents of the Amewi Extreme PRO 4WD Brushless 1:12 Jeep package. Includes the RC car, remote control, battery, charger, and tools.

3. Орнотуу

3.1 Батареяны заряддоо

1. Connect the 220 V charger to a power outlet.
2. Connect the 7.4 V, 1500 mAh LiPo battery to the charger. Ensure correct polarity.
3. Allow the battery to charge fully. The charger's indicator light will change (e.g., from red to green) when charging is complete. Refer to the charger's specific instructions for details.
4. Маанилүү: Do not leave the battery unattended while charging. Disconnect the battery from the charger once fully charged.

3.2 Installing the Battery in the Vehicle

1. Locate the battery compartment on the Amewi Extreme PRO Jeep. This is typically on the underside or accessible by removing the body shell.
2. Carefully insert the charged LiPo battery into the compartment.
3. Connect the battery connector to the vehicle's power connector. Ensure a secure connection.
4. Батарея отсегин бекем жабыңыз.

3.3 Алыстан башкаруу пультуна батареяларды орнотуу

Алыстан башкаруу пульту 4x AA батарейкасын талап кылат (кошулмага кирбейт).

1. Пульттун артындагы батареянын капкагын ачыңыз.
2. Insert 4x AA batteries, observing the correct polarity (+/-).
3. Батареянын капкагын жабыңыз.

4. Иштөө нускамалары

4.1 Күйгүзүү

1. Turn on the remote control first. The indicator light should illuminate.
2. Turn on the power switch on the Amewi Extreme PRO Jeep. The vehicle's indicator light should illuminate.
3. The remote control and vehicle will automatically pair. Wait for the indicator lights to stabilize, indicating a successful connection.

4.2 Негизги башкаруу каражаттары

• Steering Wheel (Remote Control): Унаанын багытын башкаруу үчүн солго же оңго бурулуңуз.
• Trigger (Remote Control): Pull the trigger to accelerate forward. Push the trigger forward to brake or reverse.
• Тримдин жөндөөлөрү: Use the steering trim dial on the remote control to adjust the steering if the vehicle does not drive straight when the steering wheel is centered.

2-сүрөт: Illustration of the 2.4 GHz remote control with steering wheel and trigger. Note the steering trim dial for fine adjustments.

4.3 Айдоо боюнча кеңештер

• Башкаруу элементтерине көнүү үчүн акырындык менен баштаңыз.
• Оңолуп кетпеши үчүн, жогорку ылдамдыкта күтүүсүз токтоп калуудан же бурулуштардан алыс болуңуз.
• Operate on flat, open surfaces initially before attempting more challenging terrain.
• Monitor battery life. Performance will decrease as the battery drains.

4.4 Өчүрүү

1. Turn off the power switch on the Amewi Extreme PRO Jeep first.
2. Пультту өчүрүңүз.
3. Disconnect and remove the LiPo battery from the vehicle for storage.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your Amewi Extreme PRO Jeep.

• Тазалоо: After each use, especially in dusty or dirty conditions, clean the vehicle. Use a soft brush or compressed air to remove dirt and debris from the chassis, wheels, and suspension components. Avoid using water directly on electronic parts.
• Inspecting Moving Parts: Regularly check all moving parts (wheels, axles, gears, suspension links) for wear, damage, or obstructions. Ensure all screws are tight.
• Майлоо: Apply a small amount of RC-specific lubricant to moving metal parts, such as universal joints and gear teeth, as needed.
• Батареяны сактоо: Store LiPo batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store fully charged or fully discharged for extended periods. Aim for a storage charge of approximately 3.8V per cell.
• Шинага кам көрүү: Check tires for punctures or excessive wear. Ensure they are securely mounted.

6. Кыйынчылыктарды

7. Техникалык шарттар

8. Кепилдик жана колдоо

8.1 Кепилдик маалыматы

Amewi products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. The warranty period typically begins from the date of purchase.

• Камтуу: The warranty covers manufacturing defects. It does not cover damage caused by misuse, accidents, unauthorized modifications, improper maintenance, or normal wear and tear.
• Сатып алуу далили: Retain your original purchase receipt as proof of purchase is required for all warranty claims.
• Кайтаруулар: For returns or warranty claims, please refer to the retailer's return policy (e.g., Amazon.es offers a 30-day refund/replacement policy).

8.2 Кардарларды колдоо

For technical assistance, spare parts, or further inquiries, please contact Amewi customer support or your authorized dealer.

• Өндүрүүчү Webсайт: Visit the official Amewi webакыркы колдоо маалыматы жана байланыш маалыматтары үчүн сайт.
• Дилердик колдоо: Contact the seller (e.g., Bernis RC Toy Modellbau Shop) through the platform where the product was purchased for direct assistance.
• Модель номери: When contacting support, please provide the model number (22244) жана маселенин толук сүрөттөлүшү.