1. Киришүү
This manual provides essential instructions for the installation, operation, and maintenance of your Hikvision DS-7732NI-I4/16P-12TB Network Video Recorder (NVR). This NVR is a 32-channel device supporting H.264 and H.265 video compression, resolutions up to 12MP, and features an integrated 16-port Power over Ethernet (PoE) switch. It includes 4 SATA interfaces for storage, with 12TB of pre-installed capacity, and HDMI output for local display.
Please read this manual thoroughly before operating the device and retain it for future reference. Ensure all safety precautions are observed during installation and operation.
Коопсуздук чаралары
- Бул түзмөк үчүн көрсөтүлгөн кубат адаптерин гана колдонуңуз.
- Ашыкча ысып кетүүнүн алдын алуу үчүн туура желдетүүнү камсыз кылыңыз.
- Аппаратты суюктуктарга же экстремалдык температурага тийгизүүдөн сактаңыз.
- Аппаратты ажыратууга же өзгөртүүгө аракет кылбаңыз. Бардык тейлөөлөрдү квалификациялуу кызматкерлерге тапшырыңыз.
2. Орнотуу
2.1 Таңгактан чыгаруу жана текшерүү
Carefully unpack the NVR and check the contents against the packing list. Inspect the device for any signs of damage during transit. If any items are missing or damaged, contact your supplier immediately.
2.2 Физикалык орнотуу
The DS-7732NI-I4/16P-12TB NVR is designed for rack-mounting or desktop placement. Ensure the installation location is stable, well-ventilated, and free from excessive dust or moisture.
Туташуу кубаты
- Connect the provided power cable to the NVR's power input and then to a grounded power outlet.
Туташуу тармак
- NVRдин LAN портунан Ethernet кабелин тармактык роутериңизге же коммутаторуңузга туташтырыңыз.
Туташуу дисплей
- Connect an HDMI cable from the NVR's HDMI output port to a monitor or TV.
Connecting Cameras (PoE)
- Connect IP cameras directly to the NVR's 16 PoE ports using Ethernet cables. The NVR will provide power and data connectivity.
Figure 1: Rear panel connections of the Hikvision DS-7732NI-I4/16P-12TB NVR, illustrating the power input, LAN port, HDMI output, and the 16 PoE ports for camera connections.
Hard Drive Installation (if applicable)
The NVR comes with 12TB pre-installed. If additional drives are needed or replacement is required, follow these steps:
- Power off the NVR and disconnect all cables.
- Remove the NVR cover screws and slide off the cover.
- Mount the hard drive(s) into the drive bays using the provided screws.
- Connect the SATA data and power cables to the hard drive(s) and the NVR motherboard.
- Replace the cover and secure the screws.
2.3 Баштапкы конфигурация
Powering On and First-Time Wizard
- After connecting all necessary cables, power on the NVR.
- The NVR will boot up and display a first-time setup wizard on the connected monitor.
- Follow the on-screen prompts to set up a strong administrator password, configure network settings (DHCP or static IP), and set the date and time.
IP камераларды кошуу
- The NVR will typically auto-detect Hikvision cameras connected to its PoE ports.
- For manual addition or third-party cameras, navigate to Configuration > IP Camera > Add.
- Enter the camera's IP address, protocol, port, username, and password.
3. Иштөө
3.1 Колдонуучу интерфейсинин навигациясы
The NVR can be accessed via a local monitor, web browser, or client software (e.g., iVMS-4200). The local interface is navigated using a mouse.
Негизги меню бүттүview
- Live View: Displays real-time camera feeds.
- Ойнотуу: Accesses recorded footage.
- Конфигурация: System settings, camera management, recording schedules.
- Окуя: Alarm and event management.
- Өчүрүү: Safely powers off or restarts the NVR.
3.2 Live View
Live From View screen, you can monitor all connected cameras. Double-click a camera feed to view it in full screen. Use the layout options to display multiple cameras simultaneously (e.g., 4, 9, 16, 32 channels).
Figure 2: The Live View interface of the NVR, displaying multiple camera streams in a grid layout, with options for channel selection and layout customization.
3.3 Жазуу
To configure recording settings, navigate to Configuration > Record > Schedule.
- Тынымсыз жаздыруу: Дайыма жазып турат.
- Кыймылды аныктоо жазуусу: Кыймыл аныкталганда гана жаздырылат.
- Ойготкуч жаздыруу: Сигнализация окуясы ишке киргенде жазып алат.
- Кол менен жаздыруу: Click the record icon in Live View to start/stop recording manually.
3.4 Ойнотуу
Жазылган foo жетүү үчүнtagд, барыңыз Ойнотуу негизги менюдан.
- Select the desired camera(s) and date.
- Use the timeline to navigate through recorded events. Different colors on the timeline indicate different recording types (e.g., continuous, motion).
- Кайра ойнотуу үчүн ойнотуу башкаруу элементтерин (ойнотуу, тындыруу, алдыга тез түрүү, артка түрүү) колдонуңузview footage.
- foo экспорттоо үчүнtage, select the desired segment and click the Клип or Экспорт баскычы.
3.5 Сигналдарды башкаруу
Configure alarm events and responses via Configuration > Event.
- Кыймылды аныктоо: Define detection areas and sensitivity for each camera.
- Видео Т.ampring: Detects if a camera's view тоскоолдук кылынат же өзгөртүлөт.
- Line Crossing/Intrusion Detection: Set up virtual lines or areas to trigger alarms.
- Ойготкуч аракеттери: Configure actions such as recording, sending email notifications, triggering alarm outputs, or sounding a buzzer.
3.6 Система орнотуулары
Access various system settings via Configuration > System.
- Жалпы: Date and time, language.
- Колдонуучуну башкаруу: Create, modify, or delete user accounts and assign permissions.
- Сактагыч: View HDD status, format drives, configure overwrite settings.
- Тармак: Adjust IP address, DNS, port settings.
4. Техникалык тейлөө
4.1 Микропрограмма жаңыртуулары
Regularly check for firmware updates on the official Hikvision webсайт. Микропрограммалык камсыздоону жаңыртуулар жаңы функцияларды, иштин натыйжалуулугун жакшыртууларды жана коопсуздукту жакшыртууларды камсыз кыла алат.
- Туура микропрограмманы жүктөп алыңыз file NVR моделиңиз үчүн.
- Transfer the firmware to a USB drive.
- багыттоо Configuration > System > Maintenance > Upgrade жана экрандагы нускамаларды аткарыңыз.
- Do not power off the NVR during the upgrade process.
4.2 Катуу дискти башкаруу
Monitor the health of your hard drives via Configuration > Storage > HDD. If a drive shows errors or fails, replace it promptly. You can also format drives from this menu.
4.3 Системанын камдык көчүрмөсүн сактоо жана калыбына келтирүү
It is recommended to regularly back up your NVR's configuration settings. This can be done via Configuration > System > Maintenance > Import/Export. You can export the configuration to a USB drive and restore it if needed.
4.4 Тазалоо
Periodically clean the NVR's exterior with a soft, dry cloth. Ensure ventilation openings are free from dust to maintain proper airflow and prevent overheating.
5. Кыйынчылыктарды
This section addresses common issues you might encounter. For more complex problems, refer to the Hikvision support webсайтка же техникалык колдоо менен байланышыңыз.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| NVR does not power on | Электр кабели үзүлүп калган; электр менен камсыздоо бузук; розеткада көйгөй бар. | Check power cable connection; test power outlet; contact support if power supply is suspected faulty. |
| Монитордо видео чыгыш жок | HDMI cable loose/faulty; incorrect monitor input; NVR resolution mismatch. | Check HDMI cable; ensure monitor is on correct input; try a different monitor or cable; access NVR via web interface to adjust resolution. |
| Cameras not connecting/displaying | PoE cable issue; camera faulty; incorrect camera IP/credentials; network conflict. | Check PoE cable connections; verify camera power; ensure camera IP is correct and not conflicting; check camera status in NVR configuration. |
| Жаздыруу жок | Hard drive full/faulty; recording schedule not set; camera not added/enabled. | Check HDD status and capacity; configure recording schedule; ensure cameras are added and enabled for recording. |
| Cannot access NVR via network | Incorrect IP address/gateway; network cable issue; firewall blocking access. | Verify NVR's IP address and gateway; check network cable; temporarily disable firewall for testing; ensure NVR and PC are on the same subnet. |
6. Техникалык шарттар
The following table outlines the key technical specifications for the Hikvision DS-7732NI-I4/16P-12TB NVR.
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | DS-7732NI-I4/16P-12TB |
| Видео киргизүү | 32 канал |
| Видеону кысуу | H.265 + / H.265 / H.264 + / H.264 |
| Max Resolution Recording Resolution | 12 МП чейин |
| PoE порттору | 16 көз карандысыз PoE тармак интерфейси |
| SATA интерфейстери | 4 SATA interfaces for 4 HDDs |
| Алдын ала орнотулган сактагыч | 12 ТБ (кеңейтилүүчү) |
| Video Output | 1 HDMI, 1 VGA |
| Өлчөмдөрү (W x D x H) | 15.4 x 17.5 x 2.8 дюйм (390 x 445 x 70 мм) |
| Салмагы (HDDсиз) | 11.02 фунт (5 кг) |
| Өндүрүүчү | Hikvision АКШ |
7. Кепилдик жана колдоо
7.1 Кепилдик маалыматы
For specific warranty terms and conditions applicable to your Hikvision DS-7732NI-I4/16P-12TB NVR, please refer to the warranty card included with your product or the official Hikvision webсайт. Кепилдик камтуу адатта материалдардын жана нормалдуу колдонуудагы чеберчиликтин кемчиликтерин камтыйт.
7.2 Техникалык колдоо
Should you require technical assistance, please visit the official Hikvision support website. You can find comprehensive FAQs, troubleshooting guides, software downloads, and contact information for technical support. When contacting support, please have your NVR model number (DS-7732NI-I4/16P-12TB) and serial number readily available.
Official Hikvision Support: https://www.hikvision.com/us/support/
