1. Киришүү
This manual provides essential instructions for the safe and efficient operation of your KERN PCD 6K-4 Precision Laboratory Balance. This laboratory scale features a separate weighing platform, making it ideal for use in specialized environments such as glove-bags or extractor cabinets, particularly when weighing toxic, volatile, or contaminated substances. It includes a PRE-TARE function for manual extraction of known container weights, useful for precise filling quantity controls.
Сураныч, алгачкы колдонуудан мурун бул колдонмону кылдат окуп чыгыңыз жана келечекте колдонуу үчүн сактап коюңуз.
2. Коопсуздук нускамалары
- Тең салмактуулукту ар дайым титирөөсүз, туруктуу, тегиз жерде иштетиңиз.
- Avoid exposing the balance to extreme temperatures, direct sunlight, or high humidity.
- Балансты 6000 г максималдуу сыйымдуулугунан ашыкча жүктөбөңүз.
- Keep the balance clean and free from dust and chemical spills.
- Аппарат менен кошо берилген кубат адаптерин гана колдонуңуз.
- Do not attempt to disassemble or repair the balance yourself. Refer to qualified service personnel.
3. Пакеттин мазмуну
Таңгактан чыгарганда бардык буюмдардын бар экенин жана бузулбаганын текшериңиз:
- KERN PCD 6K-4 Weighing Platform
- Санариптик дисплей бирдиги
- Кубаттуу адаптер
- Wind Protection Ring (for models with Ø 105 mm weighing plate)
- Коопсуздук капкагы
- Колдонуучунун Колдонмосу (бул документ)
Figure 1: KERN PCD 6K-4 Precision Laboratory Balance
This image shows the KERN PCD 6K-4 precision laboratory balance. It consists of a square weighing platform with a stainless steel surface, connected by a cable to a separate digital display unit. The display unit features a large digital readout, along with buttons for ON/OFF, MODE/CAL, SET/M, PRINT, and TARE. The display indicates a maximum capacity of 3500g and a readability of 0.01g, though the model is 6K-4 (6000g max). The separate design is ideal for use in specialized environments like glove-bags.
4. Орнотуу
- Жайгашкан жери: Place the weighing platform and display unit on a stable, vibration-free, and level surface. Ensure sufficient space for operation and avoid direct sunlight, drafts, or significant temperature fluctuations.
- Ассамблея: Connect the cable from the weighing platform to the designated port on the digital display unit.
- Түздөө: Use the adjustable foot bolts located on the underside of the weighing platform to level the balance. Observe the integrated spirit level (if present) to ensure precise horizontal alignment.
- Шамалдан коргоо: If your model includes a wind protection ring (for Ø 105 mm weighing plates), carefully place it around the weighing platform. This helps stabilize readings in environments with air currents.
- Кубат туташуу: Connect the power adapter to the display unit and then plug it into a suitable power outlet.
5. Иштөө нускамалары
5.1 Күйгүзүү/өчүрүү
- To turn the balance ON, басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button. The display will show a self-test and then settle at 0.00g.
- To turn the balance ӨЧҮРҮҮ, басып, кармап туруңуз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ баскычын дисплей өчмөйүнчө басыңыз.
5.2 Негизги тараза
- Ensure the balance is powered on and displays 0.00g.
- Carefully place the item to be weighed onto the center of the weighing platform.
- Wait for the display to stabilize. The stable weight will be shown.
- Remove the item from the platform.
5.3 TARE Function
The TARE function allows you to subtract the weight of a container, so only the net weight of the contents is displayed.
- Бош идишти тараза платформасына коюңуз. Дисплейде анын салмагы көрсөтүлөт.
- басыңыз идиштер button. The display will reset to 0.00g.
- Таразалана турган затты идишке салыңыз. Дисплейде заттын таза салмагы көрсөтүлөт.
The balance also features a PRE-TARE function for manual entry of a known container weight. Consult the full manual for detailed instructions on using PRE-TARE, typically accessed via the MODE/CAL or SET/M button in specific modes.
5.4 Unit Selection / Mode
басыңыз MODE/CAL button to cycle through available weighing units (e.g., grams, kilograms, pounds, ounces) or to enter different operating modes. Refer to the full manual for a list of supported units and mode functions.
5.5 Калибрлөө
Regular calibration ensures the accuracy of your balance. Calibration should be performed using certified calibration weights.
- Ensure the balance is stable and free from any load.
- басып, кармап туруңуз MODE/CAL баскычын дисплейде "CAL" пайда болгонго чейин басыңыз.
- Follow the on-screen prompts to place the required calibration weight(s) onto the platform.
- Once calibration is complete, the balance will return to weighing mode.
Note: Specific calibration procedures may vary. Always consult the detailed instructions provided with your balance for precise steps and recommended calibration weights.
5.6 Басып чыгаруу функциясы
If your balance is connected to a compatible printer or data interface, pressing the БАСМА button will send the current weighing data to the connected device.
6. Техникалык тейлөө
- Тазалоо: Тазалоодон мурун электр кубатынан ажыратыңыз. Жумшак,amp cloth with a mild detergent to clean the weighing platform and display unit. Avoid abrasive cleaners or solvents. Ensure no liquid enters the device.
- Сактагыч: When not in use for extended periods, store the balance in a clean, dry, and stable environment. Use the provided safety cover to protect it from dust.
- Текшерүү: Regularly inspect the power cable and connections for any signs of damage.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Дисплей күйбөйт. | Электр энергиясы жок; туура эмес электр адаптери. | Check power connection; ensure adapter is functional. |
| Туруксуз окуулар. | Vibrations; drafts; uneven surface; electromagnetic interference. | Place on stable surface; use wind protection; level the balance; move away from interfering devices. |
| Incorrect weight displayed. | Balance not calibrated; object placed off-center; overload. | Perform calibration; place object centrally; ensure weight is within capacity. |
| "Err" же башка ката билдирүүсү. | Ашыкча жүктөө; ички ката. | Remove load; restart balance. If error persists, contact support. |
8. Техникалык шарттар
- Модел: KERN PCD 6K-4
- Бренд: КЕРН
- Максималдуу кубаттуулугу: 6000 г (6 кг)
- Окуу мүмкүнчүлүгү: Typically 0.01 g (Note: Image shows 0.01g for a 3500g model, actual readability for 6000g model may vary slightly, but is generally in this precision range.)
- Дисплей түрү: Санарип
- Өзгөчө өзгөчөлүгү: PRE-TARE function
- Сунушталган колдонуулар: Laboratory/scientific applications
- Продукциянын өлчөмдөрү: 11.02 x 6.5 x 2.95 inches (Weighing platform and display unit combined/approximate)
- Өндүрүүчү: KERN & SOHN GmbH
9. Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please contact your KERN dealer or visit the official KERN website. Keep your purchase receipt and product serial number available when contacting support.
